§317.313. Nutrient content claims; general principles. — Inbound Citations

(g) Labeling information required in §§ 317.313, 317.354, 317.356, 317.360, 317.361, 317.362, and 317.380, whose type size is not otherwise specified, is required to be in letters and/or numbers no less than 1/16 inch in height, except as permitted by § 317.400(d)(2).

(2) The claim is made in accordance with the general requirements for nutrient content claims in § 317.313; and

(2) The claim is made in accordance with the general requirements for nutrient content claims in § 317.313; and

(2) The claim is made in accordance with the general requirements for nutrient content claims in § 317.313; and

(2) The claim is made in accordance with the general requirements for nutrient content claims in § 317.313; and

(2) The claim is made in accordance with the general requirements for nutrient content claims in § 317.313; and

(a) The term “healthy,” or any other derivative of the term “health,” may be used on the labeling of any meat or meat food product, provided that the product is labeled in accordance with § 317.309 and § 317.313.

(a) The meat food products prescribed by this general definition and standard of identity are those products that substitute, in accordance with § 317.313(d), for a standardized product defined in this part and use the name of that standardized product in their statements of identity, but that do not comply with the established standard because of a compositional deviation that results from reduction of a constituent that is described by an expressed nutrient content claim that has been defined by regulation in part 317, subpart B, of this subchapter. The expressed nutrient content claim shall comply with the requirements of § 317.313 of this subchapter and with the requirements of part 317, subpart B, of this subchapter which define the particular nutrient content claim that is used. The meat food product shall comply with the relevant standard in this part in all other respects, except as provided in paragraphs (b) and (c) of this section.

(e) The Reference Amount for an imitation or substitute product or altered product as defined in § 317.313(d), such as a “low calorie” version, shall be the same as for the product for which it is offered as a substitute.

(v) If the product meets these conditions only as a result of special processing, alteration, formulation, or reformulation, the amount of cholesterol is reduced by 25 percent or more from the reference product it replaces as described in § 317.313(j)(1) and for which it substitutes as described in § 317.313(d) that has a significant (e.g., 5 percent or more of a national or regional market) market share. As required in § 317.313(j)(2) for relative claims:

(A) The identity of the reference product and the percent (or fraction) that the cholesterol was reduced are declared in immediate proximity to the most prominent such claim (e.g., “cholesterol free ‘product’, contains 100 percent less cholesterol than ‘reference product’ ”); and

(B) Quantitative information comparing the level of cholesterol in the product per labeled serving size with that of the reference product that it replaces is declared adjacent to the most prominent claim or to the nutrition information (e.g., “contains no cholesterol compared with 30 mg in one serving of ‘reference product’ ”).

(a) The meat food products prescribed by this general definition and standard of identity are those products that substitute, in accordance with § 317.313(d), for a standardized product defined in this part and use the name of that standardized product in their statements of identity, but that do not comply with the established standard because of a compositional deviation that results from reduction of a constituent that is described by an expressed nutrient content claim that has been defined by regulation in part 317, subpart B, of this subchapter. The expressed nutrient content claim shall comply with the requirements of § 317.313 of this subchapter and with the requirements of part 317, subpart B, of this subchapter which define the particular nutrient content claim that is used. The meat food product shall comply with the relevant standard in this part in all other respects, except as provided in paragraphs (b) and (c) of this section.

(b) The performance characteristics, such as physical properties, functional properties, and shelf-life, of the meat food product shall be similar to those of the standardized meat food product produced under this part. If there is a significant difference in a performance characteristic that materially limits the use of the product compared to the use of the standardized product defined in this part, the label shall include a statement in accordance with § 317.313(d)(1) and (2) of this subchapter that informs the consumer of such differences (e.g., if appropriate, “not recommended for frozen storage” or “not suitable for roller grilling”). Deviations from the ingredient provisions of the standard must be the minimum necessary to qualify for the nutrient content claim, while maintaining similar performance characteristics.

(b) The performance characteristics, such as physical properties, functional properties, and shelf-life, of the meat food product shall be similar to those of the standardized meat food product produced under this part. If there is a significant difference in a performance characteristic that materially limits the use of the product compared to the use of the standardized product defined in this part, the label shall include a statement in accordance with § 317.313(d)(1) and (2) of this subchapter that informs the consumer of such differences (e.g., if appropriate, “not recommended for frozen storage” or “not suitable for roller grilling”). Deviations from the ingredient provisions of the standard must be the minimum necessary to qualify for the nutrient content claim, while maintaining similar performance characteristics.

(i) The product contains at least 10 percent more of the RDI or the DRV for protein, vitamins, minerals, dietary fiber, or potassium (expressed as a percent of the Daily Value) per reference amount customarily consumed than an appropriate reference product as described in § 317.313(j)(1); and

(1) If the product derives 50 percent or more of its calories from fat, its fat content is reduced by 50 percent or more per reference amount customarily consumed compared to an appropriate reference product as described in § 317.313(j)(1); or

(i) The product contains at least 25 percent fewer calories per reference amount customarily consumed than an appropriate reference product as described in § 317.313(j)(1); and

(i) The product contains at least 25 percent less sodium per reference amount customarily consumed than an appropriate reference product as described in § 317.313(j)(1); and

(i) The product contains at least 25 percent less fat per reference amount customarily consumed than an appropriate reference product as described in § 317.313(j)(1); and

(g) The term “lightly salted” may be used on a product to which has been added 50 percent less sodium than is normally added to the reference product as described in § 317.313(j)(1)(i)(B) and (j)(1)(ii)(B), provided that if the product is not “low in sodium” as defined in § 317.361(b)(4), the statement “not a low sodium food,” shall appear adjacent to the nutrition information and the information required to accompany a relative claim shall appear on the label or labeling as specified in § 317.313(j)(2).

(g) The term “lightly salted” may be used on a product to which has been added 50 percent less sodium than is normally added to the reference product as described in § 317.313(j)(1)(i)(B) and (j)(1)(ii)(B), provided that if the product is not “low in sodium” as defined in § 317.361(b)(4), the statement “not a low sodium food,” shall appear adjacent to the nutrition information and the information required to accompany a relative claim shall appear on the label or labeling as specified in § 317.313(j)(2).

(ii) As required in § 317.313(j)(2) for relative claims:

(A) The identity of the reference product and the percent (or fraction) that the nutrient is greater relative to the RDI or DRV are declared in immediate proximity to the most prominent such claim (e.g., “contains 10 percent more of the Daily Value for fiber than ‘reference product’ ”); and

(B) Quantitative information comparing the level of the nutrient in the product per labeled serving size with that of the reference product that it replaces is declared adjacent to the most prominent claim or to the nutrition information (e.g., “fiber content of ‘reference product’ is 1 g per serving; ‘this product’ contains 4 g per serving”).

(3) As required in § 317.313(j)(2) for relative claims:

(i) The identity of the reference product and the percent (or fraction) that the calories and the fat were reduced are declared in immediate proximity to the most prominent such claim (e.g., “ 1/3 fewer calories and 50 percent less fat than the market leader”); and

(ii) Quantitative information comparing the level of calories and fat content in the product per labeled serving size with that of the reference product that it replaces is declared adjacent to the most prominent claim or to the nutrition information (e.g., “lite ‘this product’—200 calories, 4 grams (g) fat; regular ‘reference product’—300 calories, 8 g fat per serving”); and

(iii) If the labeled product contains less than 40 calories or less than 3 g fat per reference amount customarily consumed, the percentage reduction for that nutrient need not be declared.

(ii) As required in § 317.313(j)(2) for relative claims:

(A) The identity of the reference product and the percent (or fraction) that the calories differ between the two products are declared in immediate proximity to the most prominent such claim (e.g., lower calorie ‘product’—“33 1/3 percent fewer calories than our regular ‘product’ ”); and

(B) Quantitative information comparing the level of calories in the product per labeled serving size with that of the reference product that it replaces is declared adjacent to the most prominent claim or to the nutrition information (e.g., “calorie content has been reduced from 150 to 100 calories per serving”).

(ii) As required in § 317.313(j)(2) for relative claims:

(A) The identity of the reference product and the percent (or fraction) that the sodium differs between the two products are declared in immediate proximity to the most prominent such claim (e.g., “reduced sodium ‘product’, 50 percent less sodium than regular ‘product’ ”); and

(B) Quantitative information comparing the level of sodium in the product per labeled serving size with that of the reference product that it replaces is declared adjacent to the most prominent claim or to the nutrition information (e.g., “sodium content has been lowered from 300 to 150 mg per serving”).

(ii) As required in § 317.313(j)(2) for relative claims:

(A) The identity of the reference product and the percent (or fraction) that the fat differs between the two products are declared in immediate proximity to the most prominent such claim (e.g., “reduced fat—50 percent less fat than our regular ‘product’ ”); and

(B) Quantitative information comparing the level of fat in the product per labeled serving size with that of the reference product that it replaces is declared adjacent to the most prominent claim or to the nutrition information (e.g., “fat content has been reduced from 8 g to 4 g per serving”).

(12) The serving size for meal-type products and main-dish products as defined in § 317.313(l) and § 317.313(m) in single-serving containers will be the entire edible content of the package. Serving size for meal-type products and main-dish products in multi-serve containers will be based on the reference amount applicable to the product in § 317.312(b) if the product is listed in § 317.312(b). Serving size for meal-type products and main-dish products in multi-serve containers that are not listed in § 317.312(b) will be based on the reference amount according to § 317.312(c), (d), and (e).

(b) “High” claims. (1) The terms “high,” “rich in,” or “excellent source of” may be used on the label or in labeling of products, except meal-type products as defined in § 317.313(l), and main-dish products as defined in § 317.313(m) provided that the product contains 20 percent or more of the RDI or the DRV per reference amount customarily consumed.

(2) The terms defined in paragraph (b)(1) of this section may be used on the label or in labeling of a meal-type product as defined in § 317.313(l), and main-dish product as defined in § 317.313(m) provided that:

(i) The product contains a food that meets the definition of “high” in paragraph (b)(1) of this section; and

(ii) The label or labeling clearly identifies the food that is the subject of the claim (e.g., “the serving of broccoli in this meal is high in vitamin C”).

(b) The terms “light” or “lite” may be used on the label or in labeling of products, except meal-type products as defined in § 317.313(l) and main-dish products as defined in § 317.313(m), without further qualification, provided that:

(1) If the product derives 50 percent or more of its calories from fat, its fat content is reduced by 50 percent or more per reference amount customarily consumed compared to an appropriate reference product as described in § 317.313(j)(1); or

(2) If the product derives less than 50 percent of its calories from fat:

(i) The number of calories is reduced by at least one-third (33 1/3 percent) per reference amount customarily consumed compared to an appropriate reference product as described in § 317.313(j)(1); or

(ii) Its fat content is reduced by 50 percent or more per reference amount customarily consumed compared to the appropriate reference product as described in § 317.313(j)(1); and

(3) As required in § 317.313(j)(2) for relative claims:

(i) The identity of the reference product and the percent (or fraction) that the calories and the fat were reduced are declared in immediate proximity to the most prominent such claim (e.g., “ 1/3 fewer calories and 50 percent less fat than the market leader”); and

(ii) Quantitative information comparing the level of calories and fat content in the product per labeled serving size with that of the reference product that it replaces is declared adjacent to the most prominent claim or to the nutrition information (e.g., “lite ‘this product’—200 calories, 4 grams (g) fat; regular ‘reference product’—300 calories, 8 g fat per serving”); and

(iii) If the labeled product contains less than 40 calories or less than 3 g fat per reference amount customarily consumed, the percentage reduction for that nutrient need not be declared.

(4) A “light” claim may not be made on a product for which the reference product meets the definition of “low fat” and “low calorie.”

(2) The terms “low calorie,” “few calories,” “contains a small amount of calories,” “low source of calories,” or “low in calories” may be used on the label or in labeling of products, except meal-type products as defined in § 317.313(l) and main-dish products as defined in § 317.313(m), provided that:

(A) The product has a reference amount customarily consumed greater than 30 grams (g) or greater than 2 tablespoons (tbsp) and does not provide more than 40 calories per reference amount customarily consumed; or

(B) The product has a reference amount customarily consumed of 30 g or less or 2 tbsp or less and does not provide more than 40 calories per reference amount customarily consumed and per 50 g (for dehydrated products that must be reconstituted before typical consumption with water or a diluent containing an insignificant amount, as defined in § 317.309(f)(1), of all nutrients per reference amount customarily consumed, the per-50-g criterion refers to the “as prepared” form).

(ii) If the product meets these conditions without the benefit of special processing, alteration, formulation, or reformulation to lower the caloric content, it is labeled to clearly refer to all products of its type and not merely to the particular brand to which the label attaches.

(2) The terms “very low sodium” or “very low in sodium” may be used on the label or in labeling of products, except meal-type products as defined in § 317.313(l) and main-dish products as defined in § 317.313(m), provided that:

(A) The product has a reference amount customarily consumed greater than 30 grams (g) or greater than 2 tablespoons (tbsp) and contains 35 mg or less sodium per reference amount customarily consumed; or

(B) The product has a reference amount customarily consumed of 30 g or less or 2 tbsp or less and contains 35 mg or less sodium per reference amount customarily consumed and per 50 g (for dehydrated products that must be reconstituted before typical consumption with water or a diluent containing an insignificant amount, as defined in § 317.309(f)(1), of all nutrients per reference amount customarily consumed, the per-50-g criterion refers to the “as prepared” form); and

(ii) If the product meets these conditions without the benefit of special processing, alteration, formulation, or reformulation to lower the sodium content, it is labeled to clearly refer to all products of its type and not merely to the particular brand to which the label attaches.

(2) The terms “low fat,” “low in fat,” “contains a small amount of fat,” “low source of fat,” or “little fat” may be used on the label and in labeling of products, except meal-type products as defined in § 317.313(l) and main-dish products as defined in § 317.313(m), provided that:

(A) The product has a reference amount customarily consumed greater than 30 g or greater than 2 tablespoons (tbsp) and contains 3 g or less of fat per reference amount customarily consumed; or

(B) The product has a reference amount customarily consumed of 30 g or less or 2 tbsp or less and contains 3 g or less of fat per reference amount customarily consumed and per 50 g (for dehydrated products that must be reconstituted before typical consumption with water or a diluent containing an insignificant amount, as defined in § 317.309(f)(1), of all nutrients per reference amount customarily consumed, the per-50-g criterion refers to the “as prepared” form).

(ii) If the product meets these conditions without the benefit of special processing, alteration, formulation, or reformulation to lower the fat content, it is labeled to clearly refer to all products of its type and not merely to the particular brand to which the label attaches.

(i) A main-dish product, as defined in § 317.313(m), and a meal-type product, as defined in § 317.313(l), and including meal-type products that weigh more than 12 ounces (oz) per serving (container), shall not contain more than 90 mg of cholesterol per labeled serving size; and

(E) These foods will not be sauces (except for foods in the four food groups in paragraph (l)(1)(ii)(A) through (D) of this section, that are in the sauces), gravies, condiments, relishes, pickles, olives, jams, jellies, syrups, breadings, or garnishes; and

(E) These foods will not be sauces (except for foods in the four food groups in paragraph (l)(1)(ii)(A) through (D) of this section, that are in the sauces), gravies, condiments, relishes, pickles, olives, jams, jellies, syrups, breadings, or garnishes; and

(E) These foods will not be sauces (except for foods in the four food groups in paragraph (l)(1)(ii)(A) through (D) of this section, that are in the sauces), gravies, condiments, relishes, pickles, olives, jams, jellies, syrups, breadings, or garnishes; and

(E) These foods will not be sauces (except for foods in the four food groups in paragraph (l)(1)(ii)(A) through (D) of this section, that are in the sauces), gravies, condiments, relishes, pickles, olives, jams, jellies, syrups, breadings, or garnishes; and

(12) The serving size for meal-type products and main-dish products as defined in § 317.313(l) and § 317.313(m) in single-serving containers will be the entire edible content of the package. Serving size for meal-type products and main-dish products in multi-serve containers will be based on the reference amount applicable to the product in § 317.312(b) if the product is listed in § 317.312(b). Serving size for meal-type products and main-dish products in multi-serve containers that are not listed in § 317.312(b) will be based on the reference amount according to § 317.312(c), (d), and (e).

(b) “High” claims. (1) The terms “high,” “rich in,” or “excellent source of” may be used on the label or in labeling of products, except meal-type products as defined in § 317.313(l), and main-dish products as defined in § 317.313(m) provided that the product contains 20 percent or more of the RDI or the DRV per reference amount customarily consumed.

(2) The terms defined in paragraph (b)(1) of this section may be used on the label or in labeling of a meal-type product as defined in § 317.313(l), and main-dish product as defined in § 317.313(m) provided that:

(i) The product contains a food that meets the definition of “high” in paragraph (b)(1) of this section; and

(ii) The label or labeling clearly identifies the food that is the subject of the claim (e.g., “the serving of broccoli in this meal is high in vitamin C”).

(b) The terms “light” or “lite” may be used on the label or in labeling of products, except meal-type products as defined in § 317.313(l) and main-dish products as defined in § 317.313(m), without further qualification, provided that:

(1) If the product derives 50 percent or more of its calories from fat, its fat content is reduced by 50 percent or more per reference amount customarily consumed compared to an appropriate reference product as described in § 317.313(j)(1); or

(2) If the product derives less than 50 percent of its calories from fat:

(i) The number of calories is reduced by at least one-third (33 1/3 percent) per reference amount customarily consumed compared to an appropriate reference product as described in § 317.313(j)(1); or

(ii) Its fat content is reduced by 50 percent or more per reference amount customarily consumed compared to the appropriate reference product as described in § 317.313(j)(1); and

(3) As required in § 317.313(j)(2) for relative claims:

(i) The identity of the reference product and the percent (or fraction) that the calories and the fat were reduced are declared in immediate proximity to the most prominent such claim (e.g., “ 1/3 fewer calories and 50 percent less fat than the market leader”); and

(ii) Quantitative information comparing the level of calories and fat content in the product per labeled serving size with that of the reference product that it replaces is declared adjacent to the most prominent claim or to the nutrition information (e.g., “lite ‘this product’—200 calories, 4 grams (g) fat; regular ‘reference product’—300 calories, 8 g fat per serving”); and

(iii) If the labeled product contains less than 40 calories or less than 3 g fat per reference amount customarily consumed, the percentage reduction for that nutrient need not be declared.

(4) A “light” claim may not be made on a product for which the reference product meets the definition of “low fat” and “low calorie.”

(2) The terms “low calorie,” “few calories,” “contains a small amount of calories,” “low source of calories,” or “low in calories” may be used on the label or in labeling of products, except meal-type products as defined in § 317.313(l) and main-dish products as defined in § 317.313(m), provided that:

(A) The product has a reference amount customarily consumed greater than 30 grams (g) or greater than 2 tablespoons (tbsp) and does not provide more than 40 calories per reference amount customarily consumed; or

(B) The product has a reference amount customarily consumed of 30 g or less or 2 tbsp or less and does not provide more than 40 calories per reference amount customarily consumed and per 50 g (for dehydrated products that must be reconstituted before typical consumption with water or a diluent containing an insignificant amount, as defined in § 317.309(f)(1), of all nutrients per reference amount customarily consumed, the per-50-g criterion refers to the “as prepared” form).

(ii) If the product meets these conditions without the benefit of special processing, alteration, formulation, or reformulation to lower the caloric content, it is labeled to clearly refer to all products of its type and not merely to the particular brand to which the label attaches.

(2) The terms “very low sodium” or “very low in sodium” may be used on the label or in labeling of products, except meal-type products as defined in § 317.313(l) and main-dish products as defined in § 317.313(m), provided that:

(A) The product has a reference amount customarily consumed greater than 30 grams (g) or greater than 2 tablespoons (tbsp) and contains 35 mg or less sodium per reference amount customarily consumed; or

(B) The product has a reference amount customarily consumed of 30 g or less or 2 tbsp or less and contains 35 mg or less sodium per reference amount customarily consumed and per 50 g (for dehydrated products that must be reconstituted before typical consumption with water or a diluent containing an insignificant amount, as defined in § 317.309(f)(1), of all nutrients per reference amount customarily consumed, the per-50-g criterion refers to the “as prepared” form); and

(ii) If the product meets these conditions without the benefit of special processing, alteration, formulation, or reformulation to lower the sodium content, it is labeled to clearly refer to all products of its type and not merely to the particular brand to which the label attaches.

(2) The terms “low fat,” “low in fat,” “contains a small amount of fat,” “low source of fat,” or “little fat” may be used on the label and in labeling of products, except meal-type products as defined in § 317.313(l) and main-dish products as defined in § 317.313(m), provided that:

(A) The product has a reference amount customarily consumed greater than 30 g or greater than 2 tablespoons (tbsp) and contains 3 g or less of fat per reference amount customarily consumed; or

(B) The product has a reference amount customarily consumed of 30 g or less or 2 tbsp or less and contains 3 g or less of fat per reference amount customarily consumed and per 50 g (for dehydrated products that must be reconstituted before typical consumption with water or a diluent containing an insignificant amount, as defined in § 317.309(f)(1), of all nutrients per reference amount customarily consumed, the per-50-g criterion refers to the “as prepared” form).

(ii) If the product meets these conditions without the benefit of special processing, alteration, formulation, or reformulation to lower the fat content, it is labeled to clearly refer to all products of its type and not merely to the particular brand to which the label attaches.

(i) A main-dish product, as defined in § 317.313(m), and a meal-type product, as defined in § 317.313(l), and including meal-type products that weigh more than 12 ounces (oz) per serving (container), shall not contain more than 90 mg of cholesterol per labeled serving size; and

(1) The terms “good source,” “contains,” or “provides” may be used on the label or in labeling of products, except meal-type products as described in § 381.413(l) and main-dish products as defined in § 317.313(m), provided that the product contains 10 to 19 percent of the RDI or the DRV per reference amount customarily consumed.