§120.6. Sanitation standard operating procedures.
21 C.F.R. § 120.6
Sanitation controls. Each processor shall have and implement a sanitation standard operating procedure (SSOP) that addresses sanitation conditions and practices before, during, and after processing. The SSOP shall address:
Safety of the water that comes into contact with food or food contact surfaces or that is used in the manufacture of ice;
Condition and cleanliness of food contact surfaces, including utensils, gloves, and outer garments;
Prevention of cross contamination from insanitary objects to food, food packaging material, and other food contact surfaces, including utensils, gloves, and outer garments, and from raw product to processed product;
Maintenance of hand washing, hand sanitizing, and toilet facilities;
Protection of food, food packaging material, and food contact surfaces from adulteration with lubricants, fuel, pesticides, cleaning compounds, sanitizing agents, condensate, and other chemical, physical, and biological contaminants;
Proper labeling, storage, and use of toxic compounds;
Control of employee health conditions that could result in the microbiological contamination of food, food packaging materials, and food contact surfaces; and
Exclusion of pests from the food plant.
Monitoring. The processor shall monitor the conditions and practices during processing with sufficient frequency to ensure, at a minimum, conformance with those conditions and practices specified in part 110 of this chapter and in subpart B of part 117 of this chapter that are appropriate both to the plant and to the food being processed. Each processor shall correct, in a timely manner, those conditions and practices that are not met.
Records. Each processor shall maintain SSOP records that, at a minimum, document the monitoring and corrections prescribed by paragraph (b) of this section. These records are subject to the recordkeeping requirements of § 120.12.
Relationship to Hazard Analysis and Critical Control Point (HACCP) plan. Sanitation standard operating procedure controls may be included in the HACCP plan required under § 120.8(b). However, to the extent that they are implemented in accordance with this section, they need not be included in the HACCP plan.
Notes, amendments, and revision history
Amendments
[66 FR 6197, Jan. 19, 2001, as amended at 80 FR 56167, Sept. 17, 2015]
Authority
Authority: 21 U.S.C. 321, 342, 343, 346, 348, 371, 374, 379e, 381, 393; 42 U.S.C. 241, 242l, 264.
Source
Source: 66 FR 6197, Jan. 19, 2001, unless otherwise noted.
Amendments
[66 FR 6197, Jan. 19, 2001, as amended at 80 FR 56167, Sept. 17, 2015]