US Codex
C.F.R.
Browse by date
Notes

§159.53. General requirements. — Inbound Citations

33 C.F.R. § 159.53

Cited by 6 regulations in release Current.

Citations to 33 C.F.R. § 159.53 as a whole

  • (c) Any person may apply to the Commanding Officer (MSC), Attn: Marine Safety Center, U.S. Coast Guard Stop 7430, 2703 Martin Luther King Jr. Avenue SE., Washington, DC 20593-7430 for certification of a marine sanitation device manufactured before January 30, 1976. The Coast Guard will issue a letter certifying the device if the applicant shows that the device meets § 159.53 by:
    (1) Evidence that the device meets State standards at least equal to the standards in § 159.53, or
    (2) Test conducted under this part by a recognized laboratory, or
    (3) Evidence that the device is substantially equivalent to a device certified under this section, or
  • (a) Any manufacturer may apply to any recognized facility for certification of a marine sanitation device. The application for certification must indicate whether the device will be used aboard all vessels or only aboard uninspected vessels and to which standard in § 159.53 the manufacturer requests the device to be tested.
  • (a) The recognized facility must evaluate the information that is submitted by the manufacturer in accordance with § 159.14(b) (1), (2), and (3), evaluate the device for compliance with §§ 159.53 through 159.95, test the device in accordance with § 159.101 and submit to the Commanding Officer (MSC), Attn: Marine Safety Center, U.S. Coast Guard Stop 7430, 2703 Martin Luther King Jr. Avenue SE., Washington, DC 20593-7430 the following:
    (1) The information that is required under § 159.14(b);
    (2) A report on compliance evaluation;
    (3) A description of each test;
    (4) Test results; and
    (5) A statement, that is signed by the person in charge of testing, that the test results are accurate and complete.
  • (2) Safe operation and servicing of the device so that any discharge meets the applicable requirements of § 159.53.
  • A discharge device must be designed so that a momentary loss of power during operation of the device does not allow a discharge that does not meet the requirements in § 159.53.

Citations to §159.53(c)