§177.1420. Isobutylene polymers. — Inbound Citations

(i) Films/layers may consist of the following:

(a) Polyolefin resins complying with item 2.2 or 3.2 of the table in § 177.1520(c).

(b) Polymeric resin blends formulated from a base polymer complying with item 2.2 or 3.2 of the table in § 177.1520(c) blended with no more than 10 percent by weight of a copolymer of ethylene and vinyl acetate complying with § 177.1350.

(c) Polymeric resin blends formulated from a base polymer complying with item 2.2 or 3.2 of the table in § 177.1520(c) blended with no more than 38 percent by weight of a homopolymer of isobutylene complying with § 177.1420(a)(1).

(d) Polyethylene phthalate resins complying with § 177.1630(e)(4)(i) and (ii).

(e) Nylon MXD-6 resins that comply with item 10.3 of the table in § 177.1500(b) of this chapter when extracted with water and heptane under the conditions of time and temperature specified for condition of use A, as set forth in Table 2 of § 176.170(c) of this chapter.

(f) Nylon 6/12 resins (CAS Reg. No. 25191-04-2) complying with item 13.3 of the table in § 177.1500(b), for use as nonfood-contact layers of laminated films and in rigid multilaminate constructions with polypropylene outer layers. Laminate structures with authorized food-contact materials yield no more than 0.15 milligrams of epsilon-caprolactam and 0.04 milligrams of omega-laurolactam per square inch when extracted with 95 percent ethanol at 121 °C (250 °F) for 2 hours.

(g) Polymeric resins that comply with an applicable regulation in this chapter which permits food type and time/temperature conditions to which the container will be exposed, including sterilization processing.