US Codex
C.F.R.
Browse by date
Notes

§665.813. Western Pacific longline fishing restrictions. — Inbound Citations

50 C.F.R. § 665.813

Cited by 12 regulations in release Current.

Citations to §665.813(b)

  • (ss) Engage in shallow-setting from a vessel registered for use under a Hawaii longline limited access permit after the shallow-set longline fishery has been closed, or upon notice that that the vessel is restricted from fishing, in violation of § 665.813(b) and (i).

Citations to §665.813(d)

Citations to §665.813(f)

Citations to §665.813(g)

Citations to §665.813(i)

  • (ss) Engage in shallow-setting from a vessel registered for use under a Hawaii longline limited access permit after the shallow-set longline fishery has been closed, or upon notice that that the vessel is restricted from fishing, in violation of § 665.813(b) and (i).

Citations to §665.813(k)

  • (n) Fail to comply with a term or condition governing longline gear configuration in § 665.813(k) if using a vessel longer than 40 ft (12.2 m) registered for use with any valid longline permit issued pursuant to § 665.801 to fish for western Pacific pelagic MUS using longline gear south of the Equator (0° lat.).

Citations to §665.813(k)(1)

  • (k) When fishing south of the Equator (0° lat.) for western Pacific pelagic MUS, owners and operators of vessels longer than 40 ft (12.2 m) registered for use with any valid longline permit issued pursuant to § 665.801 must use longline gear that is configured according to the requirements in paragraphs (k)(1) through (4) of this section.
    (1) Each float line must be at least 30 m long.
    (2) At least 15 branch lines must be attached to the mainline between any two float lines attached to the mainline.
    (3) Each branch line must be at least 10 meters long.
    (4) No branch line may be attached to the mainline closer than 70 meters to any float line.

Citations to §665.813(k)(2)

  • (k) When fishing south of the Equator (0° lat.) for western Pacific pelagic MUS, owners and operators of vessels longer than 40 ft (12.2 m) registered for use with any valid longline permit issued pursuant to § 665.801 must use longline gear that is configured according to the requirements in paragraphs (k)(1) through (4) of this section.
    (1) Each float line must be at least 30 m long.
    (2) At least 15 branch lines must be attached to the mainline between any two float lines attached to the mainline.
    (3) Each branch line must be at least 10 meters long.
    (4) No branch line may be attached to the mainline closer than 70 meters to any float line.

Citations to §665.813(k)(3)

  • (k) When fishing south of the Equator (0° lat.) for western Pacific pelagic MUS, owners and operators of vessels longer than 40 ft (12.2 m) registered for use with any valid longline permit issued pursuant to § 665.801 must use longline gear that is configured according to the requirements in paragraphs (k)(1) through (4) of this section.
    (1) Each float line must be at least 30 m long.
    (2) At least 15 branch lines must be attached to the mainline between any two float lines attached to the mainline.
    (3) Each branch line must be at least 10 meters long.
    (4) No branch line may be attached to the mainline closer than 70 meters to any float line.

Citations to §665.813(k)(4)

  • (k) When fishing south of the Equator (0° lat.) for western Pacific pelagic MUS, owners and operators of vessels longer than 40 ft (12.2 m) registered for use with any valid longline permit issued pursuant to § 665.801 must use longline gear that is configured according to the requirements in paragraphs (k)(1) through (4) of this section.
    (1) Each float line must be at least 30 m long.
    (2) At least 15 branch lines must be attached to the mainline between any two float lines attached to the mainline.
    (3) Each branch line must be at least 10 meters long.
    (4) No branch line may be attached to the mainline closer than 70 meters to any float line.

Citations to §665.813(k)(5)

  • (k) When fishing south of the Equator (0° lat.) for western Pacific pelagic MUS, owners and operators of vessels longer than 40 ft (12.2 m) registered for use with any valid longline permit issued pursuant to § 665.801 must use longline gear that is configured according to the requirements in paragraphs (k)(1) through (4) of this section.
    (1) Each float line must be at least 30 m long.
    (2) At least 15 branch lines must be attached to the mainline between any two float lines attached to the mainline.
    (3) Each branch line must be at least 10 meters long.
    (4) No branch line may be attached to the mainline closer than 70 meters to any float line.