§571.105. Standard No. 105; Hydraulic and electric brake systems. — Inbound Citations
49 C.F.R. § 571.105
Statutory Authority
Cited by 5 regulations in release Current.
Citations to 49 C.F.R. § 571.105 as a whole
-
(a) Each commercial motor vehicle manufactured on or after October 20, 1993, and equipped with a hydraulic brake system, shall meet the automatic brake adjustment system requirements of Federal Motor Vehicle Safety Standard No. 105 (49 CFR 571.105, S5.1) applicable to the vehicle at the time it was manufactured.
-
(a) Each truck and bus manufactured on or after March 1, 1999 (except trucks and buses engaged in driveaway-towaway operations), and equipped with a hydraulic brake system, shall be equipped with an antilock brake system that meets the requirements of Federal Motor Vehicle Safety Standard (FMVSS) No. 105 (49 CFR 571.105, S5.5).
-
(a) The brake system failure indicator lamp, if part of a vehicle's original equipment, shall be operable. (This lamp is required by Federal Motor Vehicle Safety Standard No. 105, 49 CFR 571.105, on every new passenger car manufactured on or after January 1, 1968, and on other types of motor vehicles manufactured on or after September 1, 1975.)(1) Apply the parking brake and turn the ignition to start, or verify lamp operation by other means indicated by the vehicle manufacturer that the brake system failure indicator lamp is operable.
-
(a) Except as provided in S5(b), vehicles manufactured on or after September 1, 2029 must meet the requirements of this standard.
-
(30) ASTM E77-66, “Standard Method for Inspection, Test, and Standardization of Etched-Stem Liquid-in-Glass Thermometers,” revised 1966, into § 571.116.