49 C.F.R. §§ 212.203–212.229

§212.203. Track inspector.

49 C.F.R. § 212.203

(a)

The track inspector is required, at a minimum, to be able to conduct independent inspections of track structures for the purpose of determining compliance with the Track Safety Standards (49 CFR part 213), to make reports of those inspections, and to recommend enforcement actions when appropriate.

(b)

The track inspector is required, at a minimum, to have at least four years of recent experience in track construction or maintenance. A bachelor's degree in engineering or a related technical specialization may be substituted for two of the four years of this experience requirement. Successful completion of the apprentice training program may be substituted for the four years of this experience requirement.

(c)

The track inspector shall demonstrate the following specific qualifications:

(1)

A comprehensive knowledge of track nomenclature, track inspection techniques, track maintenance methods, and track equipment;

(2)

The ability to understand and detect deviations from—

(i)

Track maintenance standards accepted in the industry;

(ii)

The Track Safety Standards (49 CFR part 213); and

(iii)

Railroad Workplace Safety Standards (49 CFR part 214).

(3)

Knowledge of operating practices and vehicle/track interaction sufficient to understand the safety significance of deviations and combinations of deviations; and

(4)

Specialized knowledge of the requirements of the Track Safety Standards, including the remedial action required to bring defective track into compliance with the standards.

Notes, amendments, and revision history

Amendments

[47 FR 41051, Sept. 16, 1982, as amended at 90 FR 28132, July 1, 2025]

Authority

Authority: 49 U.S.C. 20103, 20105, 20106, and 20113, and 49 CFR 1.89.

Source

Source: 47 FR 41051, Sept. 16, 1982, unless otherwise noted.

Amendments

[47 FR 41051, Sept. 16, 1982, as amended at 90 FR 28132, July 1, 2025]

§212.205. Apprentice track inspector.

49 C.F.R. § 212.205

(a)

The apprentice track inspector must be enrolled in a program of training prescribed by the Associate Administrator leading to qualification as a track inspector. The apprentice track inspector may not participate in investigative and surveillance activities, except as an assistant to a qualified State or FRA inspector while accompanying that qualified inspector.

(b)

An apprentice track inspector shall demonstrate basic knowledge of track inspection techniques, track maintenance methods, and track equipment prior to being enrolled in the program.

Notes, amendments, and revision history

Authority

Authority: 49 U.S.C. 20103, 20105, 20106, and 20113, and 49 CFR 1.89.

Source

Source: 47 FR 41051, Sept. 16, 1982, unless otherwise noted.

§212.207. Signal and train control (S&TC) inspector.

49 C.F.R. § 212.207

(a)

The S&TC inspector is required, at a minimum, to be able to conduct independent inspections of all types of signal and train control systems for the purpose of determining compliance with the Rules, Standards, and Instructions for Railroad Signal Systems (49 CFR part 236), to make reports of those inspections, and to recommend enforcement actions when appropriate.

(b)

The S&TC inspector is required, at a minimum, to have at least four years of recent experience in signal construction or maintenance. A bachelor's degree in electrical engineering or a related technical specialization may be substituted for two of the four years of this experience requirement and successful completion of the apprentice training program may be substituted for the four years of this requirement.

(c)

The S&TC inspector shall demonstrate the following specific qualifications:

(1)

A comprehensive knowledge of S&TC systems, maintenance practices, test and inspection techniques;

(2)

The ability to understand and detect deviations from—

(i)

S&TC maintenance standards accepted in the industry; and

(ii)

The Rules, Standards and Instructions for Railroad Signal Systems (49 CFR part 236).

(3)

The ability to examine plans and records, to make inspections of S&TC systems and to determine adequacy of stopping distances from prescribed speeds;

(4)

Knowledge of operating practices and signal systems sufficient to understand the safety significance of deviations and combination of deviations; and

(5)

Specialized knowledge of the requirements of the Rules, Standards and Instructions for Railroad Signal Systems, including the remedial action required to bring S&TC systems into compliance with the standards.

Notes, amendments, and revision history

Amendments

[90 FR 28133, July 1, 2025]

Authority

Authority: 49 U.S.C. 20103, 20105, 20106, and 20113, and 49 CFR 1.89.

Source

Source: 47 FR 41051, Sept. 16, 1982, unless otherwise noted.

Amendments

[90 FR 28133, July 1, 2025]

§212.209. Reserved

49 C.F.R. § 212.209

Notes, amendments, and revision history

Authority

Authority: 49 U.S.C. 20103, 20105, 20106, and 20113, and 49 CFR 1.89.

Source

Source: 47 FR 41051, Sept. 16, 1982, unless otherwise noted.

§212.211. Apprentice S&TC inspector.

49 C.F.R. § 212.211

(a)

The apprentice S&TC inspector must be enrolled in a program of training prescribed by the Associate Administrator leading to qualification as a S&TC inspector. The apprentice inspector may not participate in the investigative and surveillance activities, except as an assistant to a qualified State or FRA inspector while accompanying that qualified inspector.

(b)

Prior to being enrolled in the program the apprentice inspector shall demonstrate:

(1)

Working knowledge of basic electricity and the ability to use electrical test equipment in direct current and alternating current circuits; and

(2)

A basic knowledge of S&TC inspection and maintenance methods and procedures.

Notes, amendments, and revision history

Amendments

[90 FR 28133, July 1, 2025]

Authority

Authority: 49 U.S.C. 20103, 20105, 20106, and 20113, and 49 CFR 1.89.

Source

Source: 47 FR 41051, Sept. 16, 1982, unless otherwise noted.

Amendments

[90 FR 28133, July 1, 2025]

§212.213. Motive power and equipment (MP&E) inspector.

49 C.F.R. § 212.213

(a)

The MP&E inspector is required, at a minimum, to be able to conduct independent inspections of railroad equipment for the purpose of determining compliance with all sections of the Freight Car Safety Standards (49 CFR part 215), Safety Glazing Standards (49 CFR part 223), Reflectorization of Rail Freight Rolling Stock (49 CFR part 224), Locomotive Safety Standards (49 CFR part 229), Safety Appliance Standards (49 CFR part 231), and Power Brake Standards (49 CFR part 232), to make reports of those inspections and to recommend enforcement actions when appropriate.

(b)

The MP&E inspector is required, at a minimum, to have at least four years of recent experience in the construction or maintenance of railroad rolling equipment. A bachelor's degree in engineering or a related technical specialization may be substituted for two of the four years of this experience requirement and successful completion of the apprentice training program may be substituted for the four year experience requirement.

(c)

The MP&E inspector shall demonstrate the following qualifications:

(1)

A comprehensive knowledge of construction, testing, inspecting and repair of railroad freight cars, passenger cars, locomotives and air brakes;

(2)

The ability to understand and detect deviations from—

(i)

Railroad equipment maintenance standards accepted in the industry; and

(ii)

The Freight Car Safety Standards, Safety Glazing Standards, Locomotive Safety Standards, Safety Appliance Standards and Power Brake Standards.

(3)

The knowledge of railroad operating procedures associated with the operation of freight cars, passenger cars, locomotives and air brakes sufficient to understand the safety significance of deviations and combinations of deviations; and

(4)

Specialized knowledge of proper remedial action to be taken in order to bring defective freight cars, passenger cars, locomotives, and air brakes into compliance with applicable Federal standards.

Notes, amendments, and revision history

Amendments

[47 FR 41051, Sept. 16, 1982, as amended at 90 FR 28133, July 1, 2025]

Authority

Authority: 49 U.S.C. 20103, 20105, 20106, and 20113, and 49 CFR 1.89.

Source

Source: 47 FR 41051, Sept. 16, 1982, unless otherwise noted.

Amendments

[47 FR 41051, Sept. 16, 1982, as amended at 90 FR 28133, July 1, 2025]

§212.215. Reserved

49 C.F.R. § 212.215

Notes, amendments, and revision history

Authority

Authority: 49 U.S.C. 20103, 20105, 20106, and 20113, and 49 CFR 1.89.

Source

Source: 47 FR 41051, Sept. 16, 1982, unless otherwise noted.

§212.217. Reserved

49 C.F.R. § 212.217

Notes, amendments, and revision history

Authority

Authority: 49 U.S.C. 20103, 20105, 20106, and 20113, and 49 CFR 1.89.

Source

Source: 47 FR 41051, Sept. 16, 1982, unless otherwise noted.

§212.219. Apprentice MP&E inspector.

49 C.F.R. § 212.219

(a)

The apprentice MP&E inspector must be enrolled in a program of training prescribed by the Associate Administrator leading to qualification as an MP&E inspector. The apprentice may not participate in investigative and surveillance activities, except as an assistant to a qualified State or FRA inspector while accompanying that qualified inspector.

(b)

An apprentice MP&E inspector shall demonstrate basic knowledge of railroad equipment and air brake inspection, testing and maintenance, prior to being enrolled in the program.

Notes, amendments, and revision history

Authority

Authority: 49 U.S.C. 20103, 20105, 20106, and 20113, and 49 CFR 1.89.

Source

Source: 47 FR 41051, Sept. 16, 1982, unless otherwise noted.

§212.221. Operating practices inspector.

49 C.F.R. § 212.221

(a)

The operating practices inspector is required, at a minimum, to be able to conduct independent inspections for the purposes of determining compliance with all sections of the Federal operating practice regulations (49 CFR parts 217, 218, 219, 220, 221, 225, 228, 240, and 242) and the Hours of Service Act (45 U.S.C. 61-64b), to make reports of those inspections, and to recommend enforcement actions when appropriate.

(b)

The operating practices inspector is required at a minimum to have at least four years of recent experience in developing or administering railroad operating rules. Successful completion of the apprentice training program may be substituted for this four year experience requirement.

(c)

The operating practices inspector shall demonstrate the following specific qualifications:

(1)

A comprehensive knowledge of railroad operating practices, railroad operating rules, duties of railroad employees, and general railroad nomenclature;

(2)

The ability to understand and detect deviations from—

(i)

Railroad operating rules accepted in the industry; and

(ii)

Federal operating practice regulations;

(3)

Knowledge of operating practices and rules sufficient to understand the safety significance of deviations; and

(4)

Specialized knowledge of the requirements of the Federal operating practices regulations listed in paragraph (a) of this section, including the remedial action required to bring railroad operations into compliance with the regulations.

Notes, amendments, and revision history

Amendments

[47 FR 41051, Sept. 16, 1982, as amended at 50 FR 31578, Aug. 2, 1985; 90 FR 28133, July 1, 2025]

Authority

Authority: 49 U.S.C. 20103, 20105, 20106, and 20113, and 49 CFR 1.89.

Source

Source: 47 FR 41051, Sept. 16, 1982, unless otherwise noted.

Amendments

[47 FR 41051, Sept. 16, 1982, as amended at 50 FR 31578, Aug. 2, 1985; 90 FR 28133, July 1, 2025]

§212.223. Reserved

49 C.F.R. § 212.223

Notes, amendments, and revision history

Authority

Authority: 49 U.S.C. 20103, 20105, 20106, and 20113, and 49 CFR 1.89.

Source

Source: 47 FR 41051, Sept. 16, 1982, unless otherwise noted.

§212.225. Apprentice operating practices inspector.

49 C.F.R. § 212.225

(a)

The apprentice operating practices inspector must be enrolled in a program of training prescribed by the Associate Administrator leading to qualification as an inspector. The apprentice inspector may not participate in investigative and surveillance activities, except as an assistant to a qualified State or FRA inspector while accompanying that qualified inspector.

(b)

An apprentice operating practices inspector shall demonstrate basic knowledge of railroad operating practices, railroad operating rules and general duties of railroad employees prior to being enrolled in the program.

Notes, amendments, and revision history

Authority

Authority: 49 U.S.C. 20103, 20105, 20106, and 20113, and 49 CFR 1.89.

Source

Source: 47 FR 41051, Sept. 16, 1982, unless otherwise noted.

§212.227. Hazardous materials inspector.

49 C.F.R. § 212.227

(a)

The hazardous materials inspector is required, at a minimum, to be able to conduct independent inspections to determine compliance with all pertinent sections of the Federal hazardous materials regulations (49 CFR parts 171 through 174, and 179), to make reports of those inspections and findings, and to recommend enforcement actions when appropriate.

(b)

The hazardous materials inspector is required, at a minimum, to have at least two years of recent experience in developing, administering, or performing managerial functions related to compliance with the hazardous materials regulations; four years of recent experience in performing functions related to compliance with the hazardous materials regulations; or a bachelor's degree in a related technical specialization. Successful completion of the apprentice training program may be substituted for this requirement.

(c)

The hazardous materials inspector shall demonstrate the following specific qualifications:

(1)

A comprehensive knowledge of the transportation and operating procedures employed in the railroad, shipping, or manufacturing industries associated with the transportation of hazardous materials;

(2)

Knowledge and ability to understand and detect deviations from the Department of Transportation's Hazardous Materials Regulations, including Federal requirements and industry standards for the manufacturing of bulk packaging used in the transportation of hazardous materials by railroad;

(3)

Knowledge of the physical and chemical properties and chemical hazards associated with hazardous materials that are transported by railroad;

(4)

Knowledge of the proper remedial actions required to bring railroad, shipper, and/or manufacturing facilities into compliance with the Federal regulations; and

(5)

Knowledge of the proper remedial actions required when a hazardous materials transportation accident or incident occurs.

Notes, amendments, and revision history

Amendments

[57 FR 28115, June 24, 1992, as amended at 90 FR 28133, July 1, 2025]

Authority

Authority: 49 U.S.C. 20103, 20105, 20106, and 20113, and 49 CFR 1.89.

Source

Source: 47 FR 41051, Sept. 16, 1982, unless otherwise noted.

Amendments

[57 FR 28115, June 24, 1992, as amended at 90 FR 28133, July 1, 2025]

§212.229. Apprentice hazardous materials inspector.

49 C.F.R. § 212.229

(a)

The apprentice hazardous materials inspector must be enrolled in a program of training prescribed by the Associate Administrator for Safety leading to qualification as a hazardous materials inspector. The apprentice may not participate in investigative and surveillance activities, except as an assistant to a qualified State or FRA inspector while accompanying that qualified inspector.

(b)

An apprentice hazardous materials inspector shall demonstrate a basic knowledge of the chemical hazards associated with hazardous materials that are transported by railroad, including requirements such as shipping papers, marking, labeling, placarding, and the manufacturing and maintenance of packagings associated with these shipments.

Notes, amendments, and revision history

Amendments

[57 FR 28116, June 24, 1992]

Authority

Authority: 49 U.S.C. 20103, 20105, 20106, and 20113, and 49 CFR 1.89.

Source

Source: 47 FR 41051, Sept. 16, 1982, unless otherwise noted.

Amendments

[57 FR 28116, June 24, 1992]