§2.1. Terms and definitions. — Inbound Citations

(a) The Table of Frequency Allocations (Allocation Table) consists of the International Table of Frequency Allocations (International Table), the United States Table of Frequency Allocations (United States Table), and the FCC rule part(s) cross references as described in §§ 2.104 and 2.105, respectively. The International Telecommunication Union (ITU) Radio Regulations are described in § 2.100. The definitions of terms and acronyms used in the Allocation Table are specified in § 2.1. The footnotes to the Allocation Table are listed in ascending numerical order in paragraphs (b) through (e) of this section; however, in some cases, a letter(s) has/have been appended to the digit(s) of a footnote number in order to preserve the sequential order.

(iv) An evaluation kit as defined in § 2.1 may be sold provided that:

(A) Sales are limited to product developers, software developers, and system integrators;

(B) FCC NOTICE: This kit is designed to allow:

(1) Product developers to evaluate electronic components, circuitry, or software associated with the kit to determine whether to incorporate such items in a finished product and

(2) This kit is not a finished product and when assembled may not be resold or otherwise marketed unless all required FCC equipment authorizations are first obtained. Operation is subject to the condition that this product not cause harmful interference to licensed radio stations and that this product accept harmful interference. Unless the assembled kit is designed to operate under part 15, part 18 or part 95 of this chapter, the operator of the kit must operate under the authority of an FCC license holder or must secure an experimental authorization under part 5 of this chapter.

(C) For evaluation only; not FCC approved for resale; and

(D) Any radiofrequency transmitter employed as part of an evaluation kit shall be designed to comply with all applicable FCC technical rules, including frequency use, spurious and out-of-band emission limits, and maximum power or field strength ratings applicable to final products that would employ the components or circuitry to be evaluated.

The occupied bandwidth of transmitted emissions from an Experimental Radio Service station shall not exceed the authorized bandwidth specified in the authorization. Each authorization will show, as the prefix to the emission classification, a figure specifying the necessary bandwidth. The application may request an authorized bandwidth that is greater than the necessary bandwidth for the emission to be used, if required for the experimental purpose. Necessary bandwidth and occupied bandwidth are defined and determined in accordance with § 2.1 and § 2.202 of this chapter.

Terms with definitions including the “(RR)” designation are defined in the same way in § 2.1 of this chapter and in the Radio Regulations of the International Telecommunication Union.

(l) A device that establishes a radio frequency field in its vicinity and detects changes in that field resulting from the movement of persons or objects within its range. A radar operating pursuant to the definition for radiodetermination station in § 2.1 of this chapter is an example of a field disturbance sensor.

Terms with definitions including the “(RR)” designation are defined in the same way in § 2.1 of this chapter and in the Radio Regulations of the International Telecommunication Union.

(viii) Antenna horizon gain plot(s) determined in accordance with the procedure in Section 2.1 of Annex 5 to Appendix 7 of the ITU Radio Regulations;

(e) When used in this subpart L, the term AM broadcast station or AM radio broadcast station or FM broadcast station or FM radio broadcast station refers to commercial and noncommercial educational AM or FM radio broadcast stations as defined in § 2.1 of this chapter, unless the context indicates otherwise.

(a) The licensee of any station authorized under this part that causes harmful interference, as defined in § 2.1 of the Commission's rules, to radio communications involving the safety of life or protection of property shall promptly eliminate the interference.

(3) A subscriber unit must properly implement conventional network access codes values (NAC) of $293 and $F7E in conformance with the following standards: TIA-102.BAAC-C Common Air Interface Reserved Values (2011), Section 2.1 with validation testing according to TIA-102.CABA Interoperability Testing for Voice Operation in Conventional Systems (2010), Test Case 2.2.1.4.1 and Test Case 2.2.8.4.1.

(d) See § 2.1(c) of this chapter.