§64.2. Incorporation by reference. — Inbound Citations

(a) In accordance with Section VIII of the ASME BPVC (incorporated by reference; see § 64.2) and this subpart;

(a) The calculated stress in the tank under design conditions, including dynamic loading conditions applied simultaneously, must not exceed the allowable stress listed in Section VIII of the ASME BPVC (incorporated by reference; see § 64.2), for a design temperature of 122 °F.

The material for a tank must meet the requirements in Section VIII of the ASME BPVC (incorporated by reference; see § 64.2).

(b) Other than circular and stress analyzed experimentally by the method contained in UG-101 of Section VIII of the ASME BPVC (incorporated by reference; see § 64.2).

An MPT must have an inspection opening that is designed in accordance with Section VIII of the ASME BPVC (incorporated by reference; see § 64.2).

(d) Maximum allowable working pressure means the maximum gauge pressure at the top of the tank in the operating position at 122 °F, equal to or greater than the total containment pressure as defined in paragraph (c) of this section. The maximum allowable working pressure is used in the calculation of the minimum thickness of each element of the tank, excluding the allowance for corrosion and the thickness for loadings other than pressure, as provided for in Section VIII of the ASME BPVC (incorporated by reference, see § 64.2).