§56.01-2. Incorporation by reference.
46 C.F.R. § 56.01-2
Certain material is incorporated by reference into this part with the approval of the Director of the Federal Register under 5 U.S.C. 552(a) and 1 CFR part 51. To enforce any edition other than that specified in this section, the Coast Guard must publish a document in the Federal Register and the material must be available to the public. All approved incorporation by reference (IBR) material is available for inspection at the U.S. Coast Guard and the National Archives and Records Administration (NARA). Contact U.S. Coast Guard Headquarters at: Commandant (CG-ENG), Attn: Office of Design and Engineering Standards, U.S. Coast Guard Stop 7509, 2703 Martin Luther King Jr. Avenue SE, Washington, DC 20593-7509; phone (202) 372-1375; email [email protected]. For information on the availability of this material at NARA, visit www.archives.gov/federal-register/cfr/ibr-locations or email [email protected]. The material may be obtained from the following sources:
American Petroleum Institute (API),— 200 Massachusetts Avenue NW, Washington, DC 20002-5571; 202-682-8000; [email protected]; www.api.org.
API Standard 607, Fire Test for Quarter-turn Valves and Valves Equipped with Nonmetallic Seats, Seventh Edition, June 2016 (“API 607”); IBR approved for § 56.20-15(b).
[Reserved]
American Society of Mechanical Engineers— (ASME), Two Park Avenue, New York, NY 10016-5990; 800-843-2763; [email protected]; www.asme.org.
ANSI B1.20.3-1976 (Reaffirmed 2013), Dryseal Pipe Threads (Inch), adopted November 18, 1976 (“ASME B1.20.3”); IBR approved for § 56.60-1, table 2.
ASME BPVC.I-2019, 2019 ASME Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers, 2019 Edition, issued July 1, 2019 (“Section I of the ASME BPVC”); IBR approved for §§ 56.15-1(c); 56.60-1(a); 56.70-15(b); 56.95-10(c).
ASME BPVC.VIII.1-2019, 2019 ASME Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels, 2019 Edition, issued July 1, 2019 (“Section VIII of the ASME BPVC”); IBR approved for §§ 56.15-1(c); 56.25-5; 56.30-10(b); 56.60-1(a) and table 1; 56.60-2 table 1; 56.60-15(a) and (b); 56.95-10(c).
ASME BPVC.IX-2019, 2019 ASME Boiler and Pressure Vessel Code, Section IX, Qualification Standard for Welding, Brazing, and Fusing Procedures; Welders; Brazers; and Welding, Brazing, and Fusing Operators, 2019 Edition, issued July 1, 2019 (“Section IX of the ASME BPVC”); IBR approved for §§ 56.70-5(a); 56.70-20(a); 56.75-20(a).
ASME B1.1-2003 (reaffirmed), Unified Inch Screw Threads (UN and UNR Thread Form), issued September 30, 2004 (“ASME B1.1”); IBR approved for §§ 56.25-20(d); 56.60-1 table 2.
ASME B1.20.1-2013, Pipe Threads, General Purpose (Inch), issued November 15, 2013 (“ASME B1.20.1”); IBR approved for § 56.60-1 table 2.
ASME B16.1-2015, Gray Iron Pipe Flanges and Flanged Fittings, Classes 25, 125, and 250, issued December 28, 2015 (“ASME B16.1”); IBR approved for §§ 56.60-1 table 2; 56.60-10(a).
ASME B16.3-2016, Malleable Iron Threaded Fittings, Classes 150 and 300, issued November 30, 2016 (“ASME B16.3”); IBR approved for § 56.60-1 table 2.
ASME B16.4-2016, Gray Iron Threaded Fittings, Classes 125 and 250, issued November 11, 2016 (“ASME B16.4”); IBR approved for § 56.60-1 table 2.
ASME B16.5-2017, Pipe Flanges and Flanged Fittings, NPS 1/2 Through NPS 24 Metric/Inch Standard, issued November 20, 2017, (“ASME B16.5”); IBR approved for §§ 56.25-20(a); 56.30-10(b); 56.60-1 table 2.
ASME B16.11-2016, Forged Fittings, Socket-Welding and Threaded, issued January 1, 2017 including errata (“ASME B16.11”); IBR approved for §§ 56.30-5(c); 56.60-1 tables 1 and 2.
ASME B16.14-2013, Ferrous Pipe Plugs, Bushings, and Locknuts with Pipe Threads, issued November 15, 2013 (“ASME B16.14”); IBR approved for § 56.60-1 table 2.
ASME B16.15-2013, Cast Copper Alloy Threaded Fittings, Classes 125 and 250, issued December 6, 2013 (“ASME B16.15”); IBR approved for § 56.60-1 table 2.
ASME B16.20-2012, Metallic Gaskets for Pipe Flanges, Ring-Joint, Spiral-Wound, and Jacketed, issued June 25, 2013 (“ASME B16.20”); IBR approved for § 56.60-1 table 2.
ASME B16.21-2016, Nonmetallic Flat Gaskets for Pipe Flanges, issued December 9, 2016 (“ASME B16.21”); IBR approved for § 56.60-1 table 2.
ASME B16.23-2016, Cast Copper Alloy Solder Joint Drainage Fittings: DWV, issued January 16, 2017 (“ASME B16.23”); IBR approved for § 56.60-1 table 2.
ASME B16.25-2012, Buttwelding Ends, issued December 20, 2012 (“ASME B16.25”); IBR approved for §§ 56.30-5(b); 56.60-1 table 2; 56.70-10(a).
ASME B16.29-2012, Wrought Copper and Wrought Copper Alloy Solder-Joint Drainage Fittings—DWV, issued September 26, 2012 (“ASME B16.29”); IBR approved for § 56.60-1 table 2.
ASME B16.34-2017, Valves—Flanged, Threaded, and Welding End, issued August 23, 2017 (“ASME B16.34”); IBR approved for § 56.60-1 table 2.
ASME B18.2.1-2012, Square, Hex, Heavy Hex, and Askew Head Bolts and Hex, Heavy Hex, Hex Flange, Lobed Head, and Lag Screws (Inch Series), issued April 24, 2013 (“ASME B18.2.1”); IBR approved for §§ 56.25-20(b); 56.60-1 table 2.
ASME B18.2.2-2015, Nuts for General Applications: Machine Screw Nuts, Hex, Square, Hex Flange, and Coupling Nuts (Inch Series), issued November 30, 2015 (“ASME B18.2.2”); IBR approved for §§ 56.25-20(b) and (c); 56.60-1 table 2.
ASME B31.1-2016, Power Piping, ASME Code for Pressure Piping, B31, issued June 30, 2016 (“ASME B31.1”); IBR approved for §§ 56.01-3(b); 56.01-5(a) and (b); 56.07-5(a); 56.07-10(a), (d), (e), and (f); 56.10-1(b); 56.10-5(c); 56.15-1(c); 56.25-7; 56.30-1; 56.30-5(c) and (d); 56.30-20(d); 56.35-1(b); 56.50-1 introductory text; 56.50-40(a); 56.50-70(a); 56.50-97(a); 56.60-1 tables 1 and 2; 56.65-1; 56.70-5(b); 56.70-10(b); 56.70-15(b), (c), (d), and (g); 56.80-5; 56.80-15(d); 56.85-10; 56.85-15; 56.95-1; 56.95-10(a); 56.97-1(a).
ASME B31.3-2018, Process Piping, ASME Code for Pressure Piping, B31, issued August 30, 2019 (“ASME B31.3”); IBR approved for § 56.60-1 tables 1 and 2.
ASME B36.10M-2015 Welded and Seamless Wrought Steel Pipe, issued August 31, 2015 (“ASME B36.10M”); IBR approved for §§ 56.07-5(c); 56.30-20(d); 56.60-1 table 2.
ASME B36.19M-2004 Stainless Steel Pipe (Reaffirmed 2015), issued October 25, 2004 (“ASME B36.19M”); IBR approved for §§ 56.07-5(c); 56.60-1 table 2.
ASME BPVC.II.A-2021/SA-675, 2021 ASME Boiler and Pressure Vessel Code: Section II—Materials; Part A- Ferrous Material Specifications (SA-451 to End), Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties, 2021 Edition, issued July 1, 2021 (“ASME SA-675”); IBR approved for § 56.60-2 table 1.
ASTM International,— 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA 19428-2959; 610-832-9500; [email protected]; www.astm.org.
ASTM A36/A36M-14, Standard Specification for Carbon Structural Steel, approved December 1, 2014 (“ASTM A36/A36M”); IBR approved for § 56.30-10(b).
ASTM A47/A47M-99 (Reapproved 2014), Standard Specification for Ferritic Malleable Iron Castings, approved April 1, 2014, (“ASTM A47/A47M”); IBR approved for § 56.60-1 table 1.
ASTM A53/A53M-12, Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless, approved March 1, 2012 (“ASTM A53/A53M”); IBR approved for §§ 56.10-5(b); 56.60-1 table 1.
ASTM A126-04 (Reapproved 2014), Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings, approved April 1, 2014 (“ASTM A126”); IBR approved for § 56.60-1 table 1.
ASTM A135/A135M-19, Standard Specification for Electric-Resistance-Welded Steel Pipe, approved May 1, 2019 (“ASTM A135/A135M”); IBR approved for § 56.60-1 table 1.
ASTM A197/A197M-00 (Reapproved 2015), Standard Specification for Cupola Malleable Iron, approved November 1, 2015 (“ASTM A197/A197M”); IBR approved for § 56.60-1 table 1.
ASTM A210/A210M-19, Standard Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes, approved May 1, 2019 (“ASTM A210/A210M”); IBR approved for § 56.60-1 table 1.
ASTM A268/A268M-10 (Reapproved 2016), Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service, approved September 1, 2016 (“ASTM A268/A268M”); IBR approved for § 56.60-1 table 1.
ASTM A276/A276M-17, Standard Specification for Stainless Steel Bars and Shapes, approved March 15, 2017 (“ASTM A276/A276M”); IBR approved for § 56.60-2 table 1.
ASTM A312/A312M-17, Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes, approved March 15, 2017 (“ASTM A312/A312M”); IBR approved for §§ 56.50-105 table 2; 56.60-1 table 1.
ASTM A333/A333M-16, Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch Toughness, approved March 1, 2016 (“ASTM A333/A333M”); IBR approved for §§ 56.50-105 table 2; 56.60-1 table 1.
ASTM A334/A334M-04a (Reapproved 2016), Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service, approved March 1, 2016 (“ASTM A334/A334M”); IBR approved for §§ 56.50-105 table 2; 56.60-1 table 1.
ASTM A350/A350M-17, Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components, approved September 1, 2017 (“ASTM A350/A350M”); IBR approved for § 56.50-105 table 2.
ASTM A352/A352M-17, Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service, approved November 1, 2017 (“ASTM A352/A352M”); IBR approved for § 56.50-105 table 2.
ASTM A358/A358M-15, Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications, approved September 1, 2015 (“ASTM A358/A358M”); IBR approved for § 56.60-1 table 1.
ASTM A376/A376M-17, Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Service, approved September 1, 2017 (“ASTM A376/A376M”); IBR approved for §§ 56.60-1(a); 56.60-2(c).
ASTM A403/A403M-16, Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings, approved May 1, 2016 (“ASTM A403/A403M”); IBR approved for § 56.60-1 table 1.
ASTM A420/A420M-16, Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service, approved May 1, 2016 (“ASTM A420/A420M”); IBR approved for §§ 56.50-105 table 2; 56.60-1 table 1.
ASTM A522/A522M-14, Standard Specification for Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low-Temperature Service, approved October 1, 2014 (“ASTM A522/A522M”); IBR approved for § 56.50-105 table 2.
ASTM A575-96 (Reapproved 2013), Standard Specification for Steel Bars, Carbon, Merchant Quality, M-Grades, approved April 1, 2013 (“ASTM A575”); IBR approved for § 56.60-2 table 2.
ASTM A576-17, Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, approved November 1, 2017 (“ASTM A576”); IBR approved for § 56.60-2 table 1.
ASTM B16/B16M-10 (Reapproved 2015), Standard Specification for Free-Cutting Brass Rod, Bar, and Shapes for Use in Screw Machines, approved May 1, 2015 (“ASTM B16/B16M”); IBR approved for § 56.60-2 table 1.
ASTM B21/B21M-20, Standard Specification for Naval Brass Rod, Bar, and Shapes, approved April 1, 2020 (“ASTM B21/B21M”); IBR approved for § 56.60-2 table 1.
ASTM B26/B26M-18, Standard Specification for Aluminum-Alloy Sand Castings, approved May 15, 2018 (“ASTM B26/B26M”); IBR approved for § 56.60-2 table 1.
ASTM B42-20, Standard Specification for Seamless Copper Pipe, Standard Sizes, approved April 1, 2020 (“ASTM B42”); IBR approved for § 56.60-1 table 1.
ASTM B43-15, Standard Specification for Seamless Red Brass Pipe, Standard Sizes, approved October 1, 2015 (“ASTM B43”); IBR approved for § 56.60-1 table 1.
ASTM B68/B68M-19, Standard Specification for Seamless Copper Tube, Bright Annealed, approved April 1, 2019 (“ASTM B68/B68M”); IBR approved for § 56.60-1 table 1.
ASTM B75/B75M-19, Standard Specification for Seamless Copper Tube, approved April 1, 2019 (“ASTM B75/B75M”); IBR approved for § 56.60-1 table 1.
ASTM B85/B85M-18, Standard Specification for Aluminum-Alloy Die Castings, approved May 1, 2018 (“ASTM B85/B85M”); IBR approved for § 56.60-2 table 1.
ASTM B96/B96M-16, Standard Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels, approved April 1, 2016 (“ASTM B96/B96M”); IBR approved for § 56.60-2 table 1.
ASTM B111/B111M-18a, Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock, approved October 1, 2018 (“ASTM B111/B111M”); IBR approved for § 56.60-1 table 1.
ASTM B124/B124M-18, Standard Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes, approved March 15, 2018 (“ASTM B124/B124M”); IBR approved for § 56.60-2 table 1.
ASTM B161-05 (Reapproved 2019), Standard Specification for Nickel Seamless Pipe and Tube, approved April 1, 2019 (“ASTM B161”); IBR approved for § 56.60-1 table 1.
ASTM B165-19, Standard Specification of Nickel-Copper Alloy Seamless Pipe and Tube, approved November 1, 2019 (“ASTM B165”); IBR approved for § 56.60-1 table 1.
ASTM B167-18, Standard Specification for Nickel-Chromium-Aluminum Alloys (UNS N06699), Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674), and Nickel-Chromium-Molybdenum-Copper Alloy (UNS N06235) Seamless Pipe and Tube, approved December 1, 2018 (“ASTM B167”); IBR approved for § 56.60-1 table 1.
ASTM B171/B171M-18, Standard Specification for Copper-Alloy Plate and Sheet for Pressure Vessels, Condensers, and Heat Exchangers, approved October 1, 2018 (“ASTM B171/B171M”); IBR approved for § 56.60-2 table 1.
ASTM B210/B210M-19a, Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes, approved November 1, 2019 (“ASTM B210/B210M”); IBR approved for § 56.60-1 table 1.
ASTM B234-17, Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Surface Condensers, Evaporators, and Heat Exchangers, approved October 1, 2017 (“ASTM B234”); IBR approved for § 56.60-1 table 1.
ASTM B241/B241M-16, Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube, approved February 1, 2016 (“ASTM B241/B241M”); IBR approved for § 56.60-1 table 1.
ASTM B280-18, Standard Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service, approved March 1, 2018 (“ASTM B280”); IBR approved for § 56.60-1 table 1.
ASTM B283/B283M-18, Standard Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed), approved March 1, 2018 (“ASTM B283/B283M”); IBR approved for § 56.60-2 table 1.
ASTM B315-19, Standard Specification for Seamless Copper Alloy Pipe and Tube, approved April 1, 2019 (“ASTM B315”); IBR approved for § 56.60-1 table 1.
ASTM B361-16, Standard Specification for Factory-Made Wrought Aluminum and Aluminum-Alloy Welding Fittings, approved May 1, 2016 (“ASTM B361”); IBR approved for § 56.60-1 table 1.
ASTM B858-06 (Reapproved 2018), Standard Test Method for Ammonia Vapor Test for Determining Susceptibility to Stress Corrosion Cracking in Copper Alloys, approved March 1, 2018 (“ASTM B858”); IBR approved for § 56.60-2 table 1.
ASTM E23-18, Standard Test Methods for Notched Bar Impact Testing of Metallic Materials, approved June 1, 2018 (“ASTM E23”); IBR approved for § 56.50-105(a).
ASTM F1006-86 (Reapproved 2018), Standard Specification for Entrainment Separators for Use in Marine Piping Applications, approved September 1, 2018 (“ASTM F1006”); IBR approved for § 56.60-1 table 2.
ASTM F1007-18, Standard Specification for Pipeline Expansion Joints of the Packed Slip Type for Marine Application, approved May 1, 2018 (“ASTM F1007”); IBR approved for § 56.60-1 table 2.
ASTM F1020-86 (Reapproved 2018), Standard Specification for Line-Blind Valves for Marine Applications, approved March 1, 2018 (“ASTM F1020”); IBR approved for § 56.60-1 table 2.
ASTM F1120-87 (Reapproved 2015), Standard Specification for Circular Metallic Bellows Type Expansion Joints for Piping Applications, approved May 1, 2015 (“ASTM F1120”); IBR approved for § 56.60-1 table 2.
ASTM F1123-87 (Reapproved 2015), Standard Specification for Non-Metallic Expansion Joints, approved May 1, 2015 (“ASTM F1123”); IBR approved for § 56.60-1 table 2.
ASTM F1139-88 (Reapproved 2015), Standard Specification for Steam Traps and Drains, approved May 1, 2015 (“ASTM F1139”); IBR approved for § 56.60-1 table 2.
ASTM F1155-10 (Reapproved 2015), Standard Practice for Selection and Application of Piping System Materials, approved May 1, 2015 (“ASTM F1155”); IBR approved for §§ 56.50-60(d); 56.50-105 table 2; 56.60-1 tables 1 and 2; 56.60-15(a) and (b).
ASTM F1172-88 (Reapproved 2015), Standard Specification for Fuel Oil Meters of the Volumetric Positive Displacement Type, approved May 1, 2015 (“ASTM F1172”); IBR approved for § 56.60-1 table 2.
ASTM F1173-01 (Reapproved 2018), Standard Specification for Thermosetting Resin Fiberglass Pipe and Fittings to be Used for Marine Applications, approved March 1, 2018 (“ASTM F1173”); IBR approved for § 56.60-1 table 2.
ASTM F1199-88 (Reapproved 2015), Standard Specification for Cast (All Temperatures and Pressures) and Welded Pipe Line Strainers (150 psig and 150 °F Maximum), approved May 1, 2015 (“ASTM F1199”); IBR approved for § 56.60-1 table 2.
ASTM F1200-88 (Reapproved 2016), Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150 °F), approved September 1, 2016 (“ASTM F1200”); IBR approved for § 56.60-1 table 2.
ASTM F1201-88 (Reapproved 2016), Standard Specification for Fluid Conditioner Fittings in Piping Applications above 0 °F, approved September 1, 2016 (“ASTM F1201”); IBR approved for § 56.60-1 table 2.
ASTM F1387-19, Standard Specification for Performance of Piping and Tubing Mechanically Attached Fittings, approved September 15, 2019 (“ASTM F1387”); IBR approved for § 56.30-25(a).
ASTM F1476-07 (Reapproved 2013), Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications, approved October 1, 2013 (“ASTM F1476”); IBR approved for § 56.30-35(a).
ASTM F1548-01 (Reapproved 2018), Standard Specification for the Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications, approved March 1, 2018 (“ASTM F1548”); IBR approved for § 56.30-35(a).
Expansion Joint Manufacturers Association Inc. (EJMA),— 25 North Broadway, Tarrytown, NY 10591; 914-332-0040; www.ejma.org.
Standards of the Expansion Joint Manufacturers Association, Tenth Edition (with errata), 2016; IBR approved for § 56.60-1table 2.
[Reserved]
Fluid Controls Institute Inc. (FCI),— 1300 Sumner Avenue, Cleveland, Ohio, 44115; 216-241-7333; www.fluidcontrolsinstitute.org.
ANSI/FCI 69-1-2017, Pressure Rating Standard for Steam Traps, 2017 (“FCI 69-1”); IBR approved for § 56.60-1table 2.
[Reserved]
International Maritime Organization (IMO Publications Section),— 4 Albert Embankment, London SE1 7SR, United Kingdom; +44 (0) 20 7735 7611; [email protected]; www.imo.org.
Resolution A.753(18) Guidelines for the Application of Plastic Pipes on Ships, adopted on 4 November 1993 (“IMO Resolution A.753(18)”); IBR approved for § 56.60-25(a).
Resolution MSC.313(88), Amendments to the Guidelines for the Application of Plastic Pipes on Ships, adopted November 26, 2010 (“IMO Resolution MSC.313(88)”); IBR approved for § 56.60-25(a).
SOLAS, Consolidated text of the International Convention for the Safety of Life at Sea, 1974, and its Protocol of 1988: articles, annexes and certificates, Consolidated Edition, January 1, 2020 (“SOLAS”); IBR approved for § 56.50-50(a).
International Organization for Standardization (ISO),— Chemin de Blandonnet 8, CP 401-1214, Vernier, Geneva, Switzerland; +41 22 749 01 11; [email protected]; www.iso.org.
ISO 15540— 2016(E) Ships and Marine Technology—Fire resistance of non-metallic hose assemblies and non-metallic compensators—Test methods, Second Edition, July 15, 2016 (“ISO 15540”); IBR approved for § 56.60-25(b).
[Reserved]
Manufacturers Standardization Society of the Valve and Fittings Industry, Inc.
, 127 Park Street NE, Vienna, VA 22180-4601; 703-281-6613; www.msshq.org.
MSS SP-6-2017, Standard Finishes for Contact Faces of Pipe Flanges and Connecting-End Flanges of Valves and Fittings, published March 2017 (“MSS SP-6”); IBR approved for §§ 56.25-10(a); 56.60-1 table 2.
MSS SP-9-2013, Spot Facing for Bronze, Iron and Steel Flanges, published March 2013 (“MSS SP-9”); IBR approved for § 56.60-1 table 2.
ANSI/MSS SP-25-2018, Standard Marking System for Valves, Fittings, Flanges and Unions, published September 2018 (“MSS SP-25”); IBR approved for §§ 56.15-1(e); 56.20-5; 56.60-1 table 2.
MSS SP-45-2003, Bypass and Drain Connections, 2008 Edition, originally approved July 1953, reaffirmed 2008, (“MSS SP-45”); IBR approved for §§ 56.20-20(a); 56.60-1(b).
MSS SP-51-2012, Class 150LW Corrosion Resistant Flanges and Cast Flanged Fittings, published May 2012 (“MSS SP-51”); IBR approved for § 56.60-1 table 2.
MSS SP-53-2012, Quality Standard for Steel Castings and Forgings for Valves, Flanges, Fittings, and Other Piping Components-Magnetic Particle Examination Method, published December 2012 (“MSS SP-53”); IBR approved for § 56.60-1 table 2.
ANSI/MSS SP-55-2011, Quality Standard for Steel Castings for Valves, Flanges, Fittings and Other Piping Components-Visual Method for Evaluation of Surface Irregularities, published October 2011 (“MSS SP-55”); IBR approved for § 56.60-1 table 2.
ANSI/MSS SP-58-2009, Pipe Hangers and Supports-Materials, Design, Manufacture, Selection, Application, and Installation, published October 2011 (“MSS SP-58”); IBR approved for § 56.60-1 table 2.
MSS SP-61-2019, Pressure Testing of Valves, published December 2019 (“MSS SP-61”); IBR approved for § 56.60-1 table 2.
SAE International (SAE),— 400 Commonwealth Drive, Warrendale, PA 15096; 724-776-4841; [email protected]; www.sae.org.
SAE J1475 JUN2014, Hydraulic Hose Fitting for Marine Applications, stabilized June 2014 (“SAE J1475”); IBR approved for § 56.60-25(b).
J1942 MAR2019, Hose and Hose Assemblies for Marine Applications, revised March 2019 (“SAE J1942”); IBR approved for § 56.60-25(b).
Notes, amendments, and revision history
Amendments
[USCG-2003-16630, 73 FR 65171, Oct. 31, 2008, as amended by USCG-2009-0702, 74 FR 49228, Sept. 25, 2009; USCG-2012-0832, 77 FR 59777, Oct. 1, 2012; USCG-2012-0866, 78 FR 13250, Feb. 27, 2013; USCG-2013-0671, 78 FR 60148, Sept. 30, 2013; USCG-2012-0196, 81 FR 48251, July 22, 2016]
Source
Source: CGFR 68-82, 33 FR 18843, Dec. 18, 1968, as amended by USCG-2020-0634, 89 FR 50126, June 12, 2024, unless otherwise noted.
Authority
Authority: 33 U.S.C. 1321(j), 1509; 43 U.S.C. 1333; 46 U.S.C. 3306, 3703; E.O. 12234, 45 FR 58801, 3 CFR, 1980 Comp., p. 277; E.O. 12777, 56 FR 54757, 3 CFR, 1991 Comp., p. 351; DHS Delegation No. 00170.1, Revision No. 01.4.
Source
Source: CGFR 68-82, 33 FR 18843, Dec. 18, 1968, unless otherwise noted.
Amendments
[USCG-2003-16630, 73 FR 65171, Oct. 31, 2008, as amended by USCG-2009-0702, 74 FR 49228, Sept. 25, 2009; USCG-2012-0832, 77 FR 59777, Oct. 1, 2012; USCG-2012-0866, 78 FR 13250, Feb. 27, 2013; USCG-2013-0671, 78 FR 60148, Sept. 30, 2013; USCG-2012-0196, 81 FR 48251, July 22, 2016]