§5.3. Purpose of regulations. — Inbound Citations

Each switchboard must meet the location and installation requirements in section 5.3 of IEEE 45.7-2012 or IEC 60092-302:1997 (both incorporated by reference; see § 110.10-1 of this subchapter), as applicable.

(2) The finished lifeboat must be visually inspected inside and out. The manufacturer must develop and maintain a visual inspection checklist designed to ensure that all applicable requirements have been met and the lifeboat is equipped in accordance with approved plans. Each production lifeboat of each design must pass each of the tests described in the IMO Revised recommendation on testing, part 2, section 5.3 (incorporated by reference, see § 160.135-5 of this subpart).

(2) The finished rescue boat must be visually inspected inside and out. The manufacturer must develop and maintain a visual inspection checklist designed to ensure that all applicable requirements have been met and the rescue boat is equipped in accordance with approved plans. Each production rescue boat of each design must pass each of the tests described in the IMO Revised recommendation on testing, part 2, section 5.3 (incorporated by reference, see § 160.156-5 of this subpart).

(c) In accordance with section 5.3 of Executive Order 13526 and 32 CFR 2001.33, within 60 days of such issuance, the requester may appeal a final determination of the Commission under paragraph (b) of this section to the Interagency Security Classification Appeals Panel. The appeal should be addressed to, Executive Secretary, Interagency Security Classification Appeals Panel, Attn: Classification Challenge Appeals, c/o Information Security Oversight Office, National Archives and Records Administration, 7th and Pennsylvania Avenue, NW., Room 5W, Washington, DC 20408.