§3175.93. Integration statements.
43 C.F.R. § 3175.93
An unedited integration statement must be retained and made available to the BLM upon request. The integration statement must contain the following information:
The information required in § 3170.7(g) of this part;
The name of the company performing the integration;
The month and year for which the integration statement applies;
Meter-tube inside diameter (inches);
The following primary device information, as applicable—
Orifice bore diameter (inches); or
Beta or area ratio, discharge coefficient, and other information necessary to calculate the flow rate;
Relative density (specific gravity);
CO2 content (mole percent);
N2 content (mole percent);
Heating value calculated under § 3175.125 (Btu/standard cubic feet);
Atmospheric pressure or elevation at the FMP;
Pressure base;
Temperature base;
Static-pressure tap location (upstream or downstream);
Chart rotation (hours or days);
Differential-pressure bellows range (inches of water);
Static-pressure element range (psi); and
For each chart or day integrated—
The time and date on and time and date off;
Average differential pressure (inches of water);
Average static pressure;
Static-pressure units of measure (psia or psig);
Average temperature ( °F);
Integrator counts or extension;
Hours of flow; and
Volume (Mcf).
Notes, amendments, and revision history
Source
Source: 81 FR 81609, Nov. 17, 2016, unless otherwise noted.
Authority
Authority: 25 U.S.C. 396d and 2107; 30 U.S.C. 189, 306, 359, and 1751; and 43 U.S.C. 1732(b), 1733, and 1740.
Source
Source: 81 FR 81421, Nov. 17, 2016, unless otherwise noted.