§98.507. Records that must be retained. — Inbound Citations

In addition to the records required by § 98.3(g), you must retain the records specified in paragraphs (a) through (d) of this section for each calcium carbide process unit, as applicable.

(a) If a CEMS is used to measure CO2 emissions according to the requirements in § 98.503(a), then you must retain under this subpart the records required for the Tier 4 Calculation Methodology in § 98.37 and the information specified in paragraphs (a)(1) through (3) of this section.

(a) If a CEMS is used to measure CO2 emissions according to the requirements in § 98.503(a), then you must retain under this subpart the records required for the Tier 4 Calculation Methodology in § 98.37 and the information specified in paragraphs (a)(1) through (3) of this section.

(a) If a CEMS is used to measure CO2 emissions according to the requirements in § 98.503(a), then you must retain under this subpart the records required for the Tier 4 Calculation Methodology in § 98.37 and the information specified in paragraphs (a)(1) through (3) of this section.

In addition to the records required by § 98.3(g), you must retain the records specified in paragraphs (a) through (d) of this section for each calcium carbide process unit, as applicable.

(b) If the carbon mass balance procedure is used to determine CO2 emissions according to the requirements in § 98.503(b)(2), then you must retain records for the information specified in paragraphs (b)(1) through (5) of this section.

(4) Monthly material quantity consumed, used, or produced for each material included for the calculations of annual process CO2 emissions (tons).

(5) Average carbon content determined and records of the supplier provided information or analyses used for the determination for each material included for the calculations of annual process CO2 emissions.

(b) If the carbon mass balance procedure is used to determine CO2 emissions according to the requirements in § 98.503(b)(2), then you must retain records for the information specified in paragraphs (b)(1) through (5) of this section.

(4) Monthly material quantity consumed, used, or produced for each material included for the calculations of annual process CO2 emissions (tons).

(5) Average carbon content determined and records of the supplier provided information or analyses used for the determination for each material included for the calculations of annual process CO2 emissions.

(b) If the carbon mass balance procedure is used to determine CO2 emissions according to the requirements in § 98.503(b)(2), then you must retain records for the information specified in paragraphs (b)(1) through (5) of this section.

(4) Monthly material quantity consumed, used, or produced for each material included for the calculations of annual process CO2 emissions (tons).

(5) Average carbon content determined and records of the supplier provided information or analyses used for the determination for each material included for the calculations of annual process CO2 emissions.

(b) If the carbon mass balance procedure is used to determine CO2 emissions according to the requirements in § 98.503(b)(2), then you must retain records for the information specified in paragraphs (b)(1) through (5) of this section.

(4) Monthly material quantity consumed, used, or produced for each material included for the calculations of annual process CO2 emissions (tons).

(5) Average carbon content determined and records of the supplier provided information or analyses used for the determination for each material included for the calculations of annual process CO2 emissions.

(b) If the carbon mass balance procedure is used to determine CO2 emissions according to the requirements in § 98.503(b)(2), then you must retain records for the information specified in paragraphs (b)(1) through (5) of this section.

(4) Monthly material quantity consumed, used, or produced for each material included for the calculations of annual process CO2 emissions (tons).

(5) Average carbon content determined and records of the supplier provided information or analyses used for the determination for each material included for the calculations of annual process CO2 emissions.

In addition to the records required by § 98.3(g), you must retain the records specified in paragraphs (a) through (d) of this section for each calcium carbide process unit, as applicable.

In addition to the records required by § 98.3(g), you must retain the records specified in paragraphs (a) through (d) of this section for each calcium carbide process unit, as applicable.

(d) You must keep a record of the file generated by the verification software specified in § 98.5(b) for the applicable data specified in paragraphs (d)(1) through (8) of this section. Retention of this file satisfies the recordkeeping requirement for the data in paragraphs (d)(1) through (8) of this section.

(1) Carbon content in reducing agent (percent by weight, expressed as a decimal fraction) (equation 1 to § 98.503(b)(1)).

(2) Annual mass of reducing agent fed, charged, or otherwise introduced into the calcium carbide process unit (tons) (equation 1 to § 98.503(b)(1)).

(3) Carbon content of carbon electrode (percent by weight, expressed as a decimal fraction) (equation 1 to § 98.503(b)(1)).

(4) Annual mass of carbon electrode consumed in the calcium carbide process unit (tons) (equation 1 to § 98.503(b)(1)).

(5) Carbon content in product (percent by weight, expressed as a decimal fraction) (equation 1 to § 98.503(b)(1)).

(6) Annual mass of product produced/tapped in the calcium carbide process unit (tons) (equation 1 to § 98.503(b)(1)).

(7) Carbon content in non-product outgoing material (percent by weight, expressed as a decimal fraction) (equation 1 to § 98.503(b)(1)).

(8) Annual mass of non-product outgoing material removed from calcium carbide process unit (tons) (equation 1 to § 98.503(b)(1)).

(d) You must keep a record of the file generated by the verification software specified in § 98.5(b) for the applicable data specified in paragraphs (d)(1) through (8) of this section. Retention of this file satisfies the recordkeeping requirement for the data in paragraphs (d)(1) through (8) of this section.

(1) Carbon content in reducing agent (percent by weight, expressed as a decimal fraction) (equation 1 to § 98.503(b)(1)).

(2) Annual mass of reducing agent fed, charged, or otherwise introduced into the calcium carbide process unit (tons) (equation 1 to § 98.503(b)(1)).

(3) Carbon content of carbon electrode (percent by weight, expressed as a decimal fraction) (equation 1 to § 98.503(b)(1)).

(4) Annual mass of carbon electrode consumed in the calcium carbide process unit (tons) (equation 1 to § 98.503(b)(1)).

(5) Carbon content in product (percent by weight, expressed as a decimal fraction) (equation 1 to § 98.503(b)(1)).

(6) Annual mass of product produced/tapped in the calcium carbide process unit (tons) (equation 1 to § 98.503(b)(1)).

(7) Carbon content in non-product outgoing material (percent by weight, expressed as a decimal fraction) (equation 1 to § 98.503(b)(1)).

(8) Annual mass of non-product outgoing material removed from calcium carbide process unit (tons) (equation 1 to § 98.503(b)(1)).

(d) You must keep a record of the file generated by the verification software specified in § 98.5(b) for the applicable data specified in paragraphs (d)(1) through (8) of this section. Retention of this file satisfies the recordkeeping requirement for the data in paragraphs (d)(1) through (8) of this section.

(1) Carbon content in reducing agent (percent by weight, expressed as a decimal fraction) (equation 1 to § 98.503(b)(1)).

(2) Annual mass of reducing agent fed, charged, or otherwise introduced into the calcium carbide process unit (tons) (equation 1 to § 98.503(b)(1)).

(3) Carbon content of carbon electrode (percent by weight, expressed as a decimal fraction) (equation 1 to § 98.503(b)(1)).

(4) Annual mass of carbon electrode consumed in the calcium carbide process unit (tons) (equation 1 to § 98.503(b)(1)).

(5) Carbon content in product (percent by weight, expressed as a decimal fraction) (equation 1 to § 98.503(b)(1)).

(6) Annual mass of product produced/tapped in the calcium carbide process unit (tons) (equation 1 to § 98.503(b)(1)).

(7) Carbon content in non-product outgoing material (percent by weight, expressed as a decimal fraction) (equation 1 to § 98.503(b)(1)).

(8) Annual mass of non-product outgoing material removed from calcium carbide process unit (tons) (equation 1 to § 98.503(b)(1)).

(d) You must keep a record of the file generated by the verification software specified in § 98.5(b) for the applicable data specified in paragraphs (d)(1) through (8) of this section. Retention of this file satisfies the recordkeeping requirement for the data in paragraphs (d)(1) through (8) of this section.

(1) Carbon content in reducing agent (percent by weight, expressed as a decimal fraction) (equation 1 to § 98.503(b)(1)).

(2) Annual mass of reducing agent fed, charged, or otherwise introduced into the calcium carbide process unit (tons) (equation 1 to § 98.503(b)(1)).

(3) Carbon content of carbon electrode (percent by weight, expressed as a decimal fraction) (equation 1 to § 98.503(b)(1)).

(4) Annual mass of carbon electrode consumed in the calcium carbide process unit (tons) (equation 1 to § 98.503(b)(1)).

(5) Carbon content in product (percent by weight, expressed as a decimal fraction) (equation 1 to § 98.503(b)(1)).

(6) Annual mass of product produced/tapped in the calcium carbide process unit (tons) (equation 1 to § 98.503(b)(1)).

(7) Carbon content in non-product outgoing material (percent by weight, expressed as a decimal fraction) (equation 1 to § 98.503(b)(1)).

(8) Annual mass of non-product outgoing material removed from calcium carbide process unit (tons) (equation 1 to § 98.503(b)(1)).

(d) You must keep a record of the file generated by the verification software specified in § 98.5(b) for the applicable data specified in paragraphs (d)(1) through (8) of this section. Retention of this file satisfies the recordkeeping requirement for the data in paragraphs (d)(1) through (8) of this section.

(1) Carbon content in reducing agent (percent by weight, expressed as a decimal fraction) (equation 1 to § 98.503(b)(1)).

(2) Annual mass of reducing agent fed, charged, or otherwise introduced into the calcium carbide process unit (tons) (equation 1 to § 98.503(b)(1)).

(3) Carbon content of carbon electrode (percent by weight, expressed as a decimal fraction) (equation 1 to § 98.503(b)(1)).

(4) Annual mass of carbon electrode consumed in the calcium carbide process unit (tons) (equation 1 to § 98.503(b)(1)).

(5) Carbon content in product (percent by weight, expressed as a decimal fraction) (equation 1 to § 98.503(b)(1)).

(6) Annual mass of product produced/tapped in the calcium carbide process unit (tons) (equation 1 to § 98.503(b)(1)).

(7) Carbon content in non-product outgoing material (percent by weight, expressed as a decimal fraction) (equation 1 to § 98.503(b)(1)).

(8) Annual mass of non-product outgoing material removed from calcium carbide process unit (tons) (equation 1 to § 98.503(b)(1)).

(d) You must keep a record of the file generated by the verification software specified in § 98.5(b) for the applicable data specified in paragraphs (d)(1) through (8) of this section. Retention of this file satisfies the recordkeeping requirement for the data in paragraphs (d)(1) through (8) of this section.

(1) Carbon content in reducing agent (percent by weight, expressed as a decimal fraction) (equation 1 to § 98.503(b)(1)).

(2) Annual mass of reducing agent fed, charged, or otherwise introduced into the calcium carbide process unit (tons) (equation 1 to § 98.503(b)(1)).

(3) Carbon content of carbon electrode (percent by weight, expressed as a decimal fraction) (equation 1 to § 98.503(b)(1)).

(4) Annual mass of carbon electrode consumed in the calcium carbide process unit (tons) (equation 1 to § 98.503(b)(1)).

(5) Carbon content in product (percent by weight, expressed as a decimal fraction) (equation 1 to § 98.503(b)(1)).

(6) Annual mass of product produced/tapped in the calcium carbide process unit (tons) (equation 1 to § 98.503(b)(1)).

(7) Carbon content in non-product outgoing material (percent by weight, expressed as a decimal fraction) (equation 1 to § 98.503(b)(1)).

(8) Annual mass of non-product outgoing material removed from calcium carbide process unit (tons) (equation 1 to § 98.503(b)(1)).

(d) You must keep a record of the file generated by the verification software specified in § 98.5(b) for the applicable data specified in paragraphs (d)(1) through (8) of this section. Retention of this file satisfies the recordkeeping requirement for the data in paragraphs (d)(1) through (8) of this section.

(1) Carbon content in reducing agent (percent by weight, expressed as a decimal fraction) (equation 1 to § 98.503(b)(1)).

(2) Annual mass of reducing agent fed, charged, or otherwise introduced into the calcium carbide process unit (tons) (equation 1 to § 98.503(b)(1)).

(3) Carbon content of carbon electrode (percent by weight, expressed as a decimal fraction) (equation 1 to § 98.503(b)(1)).

(4) Annual mass of carbon electrode consumed in the calcium carbide process unit (tons) (equation 1 to § 98.503(b)(1)).

(5) Carbon content in product (percent by weight, expressed as a decimal fraction) (equation 1 to § 98.503(b)(1)).

(6) Annual mass of product produced/tapped in the calcium carbide process unit (tons) (equation 1 to § 98.503(b)(1)).

(7) Carbon content in non-product outgoing material (percent by weight, expressed as a decimal fraction) (equation 1 to § 98.503(b)(1)).

(8) Annual mass of non-product outgoing material removed from calcium carbide process unit (tons) (equation 1 to § 98.503(b)(1)).

(d) You must keep a record of the file generated by the verification software specified in § 98.5(b) for the applicable data specified in paragraphs (d)(1) through (8) of this section. Retention of this file satisfies the recordkeeping requirement for the data in paragraphs (d)(1) through (8) of this section.

(1) Carbon content in reducing agent (percent by weight, expressed as a decimal fraction) (equation 1 to § 98.503(b)(1)).

(2) Annual mass of reducing agent fed, charged, or otherwise introduced into the calcium carbide process unit (tons) (equation 1 to § 98.503(b)(1)).

(3) Carbon content of carbon electrode (percent by weight, expressed as a decimal fraction) (equation 1 to § 98.503(b)(1)).

(4) Annual mass of carbon electrode consumed in the calcium carbide process unit (tons) (equation 1 to § 98.503(b)(1)).

(5) Carbon content in product (percent by weight, expressed as a decimal fraction) (equation 1 to § 98.503(b)(1)).

(6) Annual mass of product produced/tapped in the calcium carbide process unit (tons) (equation 1 to § 98.503(b)(1)).

(7) Carbon content in non-product outgoing material (percent by weight, expressed as a decimal fraction) (equation 1 to § 98.503(b)(1)).

(8) Annual mass of non-product outgoing material removed from calcium carbide process unit (tons) (equation 1 to § 98.503(b)(1)).