§98.314. Monitoring and QA/QC requirements. — Inbound Citations

(1) Carbon content factor for petroleum coke consumed in month from the supplier or as measured by the applicable method incorporated by reference in § 98.7 according to § 98.314(c) (percent by weight, expressed as a decimal fraction) (Equation EE-2 of § 98.313).

(13) Sampling analysis results of carbon content of petroleum coke as determined for QA/QC of supplier data under § 98.314(d) (percent by weight expressed as a decimal fraction).

(b) Calculate and report under this subpart the annual process CO2 emissions for each chloride process line by determining the mass of calcined petroleum coke consumed in each line as specified in paragraphs (b)(1) through (b)(3) of this section. Use Equation EE-1 of this section to calulate annual combined process CO2 emissions from all process lines and use Equation EE-2 of this section to calculate annual process CO2 emissions for each process line. If your facility generates carbon-containing waste, use Equation EE-3 of this section to estimate the annual quantity of carbon-containing waste generated and its carbon contents according to § 98.314(e) and (f):

(1) You must calculate the annual CO2 process emissions from all process lines at the facility using Equation EE-1 of this section:

(2) You must calculate the annual CO2 process emissions from each process lines at the facility using Equation EE-2 of this section:

(3) If facility generates carbon-containing waste, you must calculate the total annual quantity of carbon-containing waste produced from all process lines using Equation EE-3 of this section and its carbon contents according to § 98.314(e) and (f):

(b) Calculate and report under this subpart the annual process CO2 emissions for each chloride process line by determining the mass of calcined petroleum coke consumed in each line as specified in paragraphs (b)(1) through (b)(3) of this section. Use Equation EE-1 of this section to calulate annual combined process CO2 emissions from all process lines and use Equation EE-2 of this section to calculate annual process CO2 emissions for each process line. If your facility generates carbon-containing waste, use Equation EE-3 of this section to estimate the annual quantity of carbon-containing waste generated and its carbon contents according to § 98.314(e) and (f):

(1) You must calculate the annual CO2 process emissions from all process lines at the facility using Equation EE-1 of this section:

(2) You must calculate the annual CO2 process emissions from each process lines at the facility using Equation EE-2 of this section:

(3) If facility generates carbon-containing waste, you must calculate the total annual quantity of carbon-containing waste produced from all process lines using Equation EE-3 of this section and its carbon contents according to § 98.314(e) and (f):

(c) For each missing value of the carbon content of carbon-containing waste, you must conduct a new analysis following the procedures in § 98.314(f).