§98.286. Data reporting requirements. — Inbound Citations

(1) Records of all analyses and calculations conducted for reported data listed in § 98.286(b).

(b) If a CEMS is not used to measure process CO2 emissions, you must report the information in paragraph (b)(1) through (8) of this section for all silicon carbide process units or production furnaces combined:

(1) [Reserved]

(2) silicon carbide (tons).

(4) [Reserved]

(5) Whether carbon content of the petroleum coke is based on reports from the supplier or through self measurement using applicable ASTM standard method.

(6) [Reserved]

(7) Sampling analysis results for carbon content of consumed petroleum coke as determined for QA/QC of supplier data under § 98.284(d) (percent by weight expressed as a decimal fraction).

(8) Number of times in the reporting year that missing data procedures were followed to measure the carbon contents of petroleum coke (number of months) and petroleum coke consumption (number of months).

(b) If a CEMS is not used to measure process CO2 emissions, you must report the information in paragraph (b)(1) through (8) of this section for all silicon carbide process units or production furnaces combined:

(1) [Reserved]

(2) silicon carbide (tons).

(4) [Reserved]

(5) Whether carbon content of the petroleum coke is based on reports from the supplier or through self measurement using applicable ASTM standard method.

(6) [Reserved]

(7) Sampling analysis results for carbon content of consumed petroleum coke as determined for QA/QC of supplier data under § 98.284(d) (percent by weight expressed as a decimal fraction).

(8) Number of times in the reporting year that missing data procedures were followed to measure the carbon contents of petroleum coke (number of months) and petroleum coke consumption (number of months).

(b) If a CEMS is not used to measure process CO2 emissions, you must report the information in paragraph (b)(1) through (8) of this section for all silicon carbide process units or production furnaces combined:

(1) [Reserved]

(2) silicon carbide (tons).

(4) [Reserved]

(5) Whether carbon content of the petroleum coke is based on reports from the supplier or through self measurement using applicable ASTM standard method.

(6) [Reserved]

(7) Sampling analysis results for carbon content of consumed petroleum coke as determined for QA/QC of supplier data under § 98.284(d) (percent by weight expressed as a decimal fraction).

(8) Number of times in the reporting year that missing data procedures were followed to measure the carbon contents of petroleum coke (number of months) and petroleum coke consumption (number of months).

(b) If a CEMS is not used to measure process CO2 emissions, you must report the information in paragraph (b)(1) through (8) of this section for all silicon carbide process units or production furnaces combined:

(1) [Reserved]

(2) silicon carbide (tons).

(4) [Reserved]

(5) Whether carbon content of the petroleum coke is based on reports from the supplier or through self measurement using applicable ASTM standard method.

(6) [Reserved]

(7) Sampling analysis results for carbon content of consumed petroleum coke as determined for QA/QC of supplier data under § 98.284(d) (percent by weight expressed as a decimal fraction).

(8) Number of times in the reporting year that missing data procedures were followed to measure the carbon contents of petroleum coke (number of months) and petroleum coke consumption (number of months).

(b) If a CEMS is not used to measure process CO2 emissions, you must report the information in paragraph (b)(1) through (8) of this section for all silicon carbide process units or production furnaces combined:

(1) [Reserved]

(2) silicon carbide (tons).

(4) [Reserved]

(5) Whether carbon content of the petroleum coke is based on reports from the supplier or through self measurement using applicable ASTM standard method.

(6) [Reserved]

(7) Sampling analysis results for carbon content of consumed petroleum coke as determined for QA/QC of supplier data under § 98.284(d) (percent by weight expressed as a decimal fraction).

(8) Number of times in the reporting year that missing data procedures were followed to measure the carbon contents of petroleum coke (number of months) and petroleum coke consumption (number of months).

(b) If a CEMS is not used to measure process CO2 emissions, you must report the information in paragraph (b)(1) through (8) of this section for all silicon carbide process units or production furnaces combined:

(1) [Reserved]

(2) silicon carbide (tons).

(4) [Reserved]

(5) Whether carbon content of the petroleum coke is based on reports from the supplier or through self measurement using applicable ASTM standard method.

(6) [Reserved]

(7) Sampling analysis results for carbon content of consumed petroleum coke as determined for QA/QC of supplier data under § 98.284(d) (percent by weight expressed as a decimal fraction).

(8) Number of times in the reporting year that missing data procedures were followed to measure the carbon contents of petroleum coke (number of months) and petroleum coke consumption (number of months).

(b) If a CEMS is not used to measure process CO2 emissions, you must report the information in paragraph (b)(1) through (8) of this section for all silicon carbide process units or production furnaces combined:

(1) [Reserved]

(2) silicon carbide (tons).

(4) [Reserved]

(5) Whether carbon content of the petroleum coke is based on reports from the supplier or through self measurement using applicable ASTM standard method.

(6) [Reserved]

(7) Sampling analysis results for carbon content of consumed petroleum coke as determined for QA/QC of supplier data under § 98.284(d) (percent by weight expressed as a decimal fraction).

(8) Number of times in the reporting year that missing data procedures were followed to measure the carbon contents of petroleum coke (number of months) and petroleum coke consumption (number of months).

(b) If a CEMS is not used to measure process CO2 emissions, you must report the information in paragraph (b)(1) through (8) of this section for all silicon carbide process units or production furnaces combined:

(1) [Reserved]

(2) silicon carbide (tons).

(4) [Reserved]

(5) Whether carbon content of the petroleum coke is based on reports from the supplier or through self measurement using applicable ASTM standard method.

(6) [Reserved]

(7) Sampling analysis results for carbon content of consumed petroleum coke as determined for QA/QC of supplier data under § 98.284(d) (percent by weight expressed as a decimal fraction).

(8) Number of times in the reporting year that missing data procedures were followed to measure the carbon contents of petroleum coke (number of months) and petroleum coke consumption (number of months).

(d) Records of all information reported as required under § 98.286(c).

(c) If methane abatement technology is used at the silicon carbide production facility, you must report the information in paragraphs (c)(1) through (3) of this section. Upon reporting this information once in an annual report, you are not required to report this information again unless the information changes during a reporting year, in which case, the reporter must include any updates in the annual report for the reporting year in which the change occurred.

(1) Type of methane abatement technology used on each silicon carbide process unit or production furnace, and date of installation for each.

(2) You must either use the manufacturer's specified destruction efficiency or the destruction efficiency determined via a performance test. If you report the destruction efficiency determined via a performance test, you must also report the test method that was used during the performance test.

(3) Percentage of annual operating hours that methane abatement technology was in use for all silicon carbide process units or production furnaces combined.

(c) If methane abatement technology is used at the silicon carbide production facility, you must report the information in paragraphs (c)(1) through (3) of this section. Upon reporting this information once in an annual report, you are not required to report this information again unless the information changes during a reporting year, in which case, the reporter must include any updates in the annual report for the reporting year in which the change occurred.

(1) Type of methane abatement technology used on each silicon carbide process unit or production furnace, and date of installation for each.

(2) You must either use the manufacturer's specified destruction efficiency or the destruction efficiency determined via a performance test. If you report the destruction efficiency determined via a performance test, you must also report the test method that was used during the performance test.

(3) Percentage of annual operating hours that methane abatement technology was in use for all silicon carbide process units or production furnaces combined.

(c) If methane abatement technology is used at the silicon carbide production facility, you must report the information in paragraphs (c)(1) through (3) of this section. Upon reporting this information once in an annual report, you are not required to report this information again unless the information changes during a reporting year, in which case, the reporter must include any updates in the annual report for the reporting year in which the change occurred.

(1) Type of methane abatement technology used on each silicon carbide process unit or production furnace, and date of installation for each.

(2) You must either use the manufacturer's specified destruction efficiency or the destruction efficiency determined via a performance test. If you report the destruction efficiency determined via a performance test, you must also report the test method that was used during the performance test.

(3) Percentage of annual operating hours that methane abatement technology was in use for all silicon carbide process units or production furnaces combined.