§98.196. Data reporting requirements. — Inbound Citations

(a) If a CEMS is used to measure CO2 emissions, then you must report under this subpart the relevant information required by § 98.36 and the information listed in paragraphs (a)(1) through (14) of this section.

(9) Annual arithmetic average of calcium oxide content for each type of lime product produced (metric tons CaO/metric ton lime).

(10) Annual arithmetic average of magnesium oxide content for each type of lime product produced (metric tons MgO/metric ton lime).

(11) Annual arithmetic average of calcium oxide content for each type of calcined lime byproduct/waste sold (metric tons CaO/metric ton lime).

(12) Annual arithmetic average of magnesium oxide content for each type of calcined lime byproduct/waste sold (metric tons MgO/metric ton lime).

(13) Annual arithmetic average of calcium oxide content for each type of calcined lime byproduct/waste not sold (metric tons CaO/metric ton lime).

(14) Annual arithmetic average of magnesium oxide content for each type of calcined lime byproduct/waste not sold (metric tons MgO/metric ton lime)

(a) If a CEMS is used to measure CO2 emissions, then you must report under this subpart the relevant information required by § 98.36 and the information listed in paragraphs (a)(1) through (14) of this section.

(9) Annual arithmetic average of calcium oxide content for each type of lime product produced (metric tons CaO/metric ton lime).

(10) Annual arithmetic average of magnesium oxide content for each type of lime product produced (metric tons MgO/metric ton lime).

(11) Annual arithmetic average of calcium oxide content for each type of calcined lime byproduct/waste sold (metric tons CaO/metric ton lime).

(12) Annual arithmetic average of magnesium oxide content for each type of calcined lime byproduct/waste sold (metric tons MgO/metric ton lime).

(13) Annual arithmetic average of calcium oxide content for each type of calcined lime byproduct/waste not sold (metric tons CaO/metric ton lime).

(14) Annual arithmetic average of magnesium oxide content for each type of calcined lime byproduct/waste not sold (metric tons MgO/metric ton lime)

(a) If a CEMS is used to measure CO2 emissions, then you must report under this subpart the relevant information required by § 98.36 and the information listed in paragraphs (a)(1) through (14) of this section.

(9) Annual arithmetic average of calcium oxide content for each type of lime product produced (metric tons CaO/metric ton lime).

(10) Annual arithmetic average of magnesium oxide content for each type of lime product produced (metric tons MgO/metric ton lime).

(11) Annual arithmetic average of calcium oxide content for each type of calcined lime byproduct/waste sold (metric tons CaO/metric ton lime).

(12) Annual arithmetic average of magnesium oxide content for each type of calcined lime byproduct/waste sold (metric tons MgO/metric ton lime).

(13) Annual arithmetic average of calcium oxide content for each type of calcined lime byproduct/waste not sold (metric tons CaO/metric ton lime).

(14) Annual arithmetic average of magnesium oxide content for each type of calcined lime byproduct/waste not sold (metric tons MgO/metric ton lime)

(a) If a CEMS is used to measure CO2 emissions, then you must report under this subpart the relevant information required by § 98.36 and the information listed in paragraphs (a)(1) through (14) of this section.

(9) Annual arithmetic average of calcium oxide content for each type of lime product produced (metric tons CaO/metric ton lime).

(10) Annual arithmetic average of magnesium oxide content for each type of lime product produced (metric tons MgO/metric ton lime).

(11) Annual arithmetic average of calcium oxide content for each type of calcined lime byproduct/waste sold (metric tons CaO/metric ton lime).

(12) Annual arithmetic average of magnesium oxide content for each type of calcined lime byproduct/waste sold (metric tons MgO/metric ton lime).

(13) Annual arithmetic average of calcium oxide content for each type of calcined lime byproduct/waste not sold (metric tons CaO/metric ton lime).

(14) Annual arithmetic average of magnesium oxide content for each type of calcined lime byproduct/waste not sold (metric tons MgO/metric ton lime)

(a) If a CEMS is used to measure CO2 emissions, then you must report under this subpart the relevant information required by § 98.36 and the information listed in paragraphs (a)(1) through (14) of this section.

(9) Annual arithmetic average of calcium oxide content for each type of lime product produced (metric tons CaO/metric ton lime).

(10) Annual arithmetic average of magnesium oxide content for each type of lime product produced (metric tons MgO/metric ton lime).

(11) Annual arithmetic average of calcium oxide content for each type of calcined lime byproduct/waste sold (metric tons CaO/metric ton lime).

(12) Annual arithmetic average of magnesium oxide content for each type of calcined lime byproduct/waste sold (metric tons MgO/metric ton lime).

(13) Annual arithmetic average of calcium oxide content for each type of calcined lime byproduct/waste not sold (metric tons CaO/metric ton lime).

(14) Annual arithmetic average of magnesium oxide content for each type of calcined lime byproduct/waste not sold (metric tons MgO/metric ton lime)

(a) If a CEMS is used to measure CO2 emissions, then you must report under this subpart the relevant information required by § 98.36 and the information listed in paragraphs (a)(1) through (14) of this section.

(9) Annual arithmetic average of calcium oxide content for each type of lime product produced (metric tons CaO/metric ton lime).

(10) Annual arithmetic average of magnesium oxide content for each type of lime product produced (metric tons MgO/metric ton lime).

(11) Annual arithmetic average of calcium oxide content for each type of calcined lime byproduct/waste sold (metric tons CaO/metric ton lime).

(12) Annual arithmetic average of magnesium oxide content for each type of calcined lime byproduct/waste sold (metric tons MgO/metric ton lime).

(13) Annual arithmetic average of calcium oxide content for each type of calcined lime byproduct/waste not sold (metric tons CaO/metric ton lime).

(14) Annual arithmetic average of magnesium oxide content for each type of calcined lime byproduct/waste not sold (metric tons MgO/metric ton lime)

(a) If a CEMS is used to measure CO2 emissions, then you must report under this subpart the relevant information required by § 98.36 and the information listed in paragraphs (a)(1) through (14) of this section.

(9) Annual arithmetic average of calcium oxide content for each type of lime product produced (metric tons CaO/metric ton lime).

(10) Annual arithmetic average of magnesium oxide content for each type of lime product produced (metric tons MgO/metric ton lime).

(11) Annual arithmetic average of calcium oxide content for each type of calcined lime byproduct/waste sold (metric tons CaO/metric ton lime).

(12) Annual arithmetic average of magnesium oxide content for each type of calcined lime byproduct/waste sold (metric tons MgO/metric ton lime).

(13) Annual arithmetic average of calcium oxide content for each type of calcined lime byproduct/waste not sold (metric tons CaO/metric ton lime).

(14) Annual arithmetic average of magnesium oxide content for each type of calcined lime byproduct/waste not sold (metric tons MgO/metric ton lime)

(a) If a CEMS is used to measure CO2 emissions, then you must report under this subpart the relevant information required by § 98.36 and the information listed in paragraphs (a)(1) through (14) of this section.

(9) Annual arithmetic average of calcium oxide content for each type of lime product produced (metric tons CaO/metric ton lime).

(10) Annual arithmetic average of magnesium oxide content for each type of lime product produced (metric tons MgO/metric ton lime).

(11) Annual arithmetic average of calcium oxide content for each type of calcined lime byproduct/waste sold (metric tons CaO/metric ton lime).

(12) Annual arithmetic average of magnesium oxide content for each type of calcined lime byproduct/waste sold (metric tons MgO/metric ton lime).

(13) Annual arithmetic average of calcium oxide content for each type of calcined lime byproduct/waste not sold (metric tons CaO/metric ton lime).

(14) Annual arithmetic average of magnesium oxide content for each type of calcined lime byproduct/waste not sold (metric tons MgO/metric ton lime)

(a) If a CEMS is used to measure CO2 emissions, then you must report under this subpart the relevant information required by § 98.36 and the information listed in paragraphs (a)(1) through (14) of this section.

(9) Annual arithmetic average of calcium oxide content for each type of lime product produced (metric tons CaO/metric ton lime).

(10) Annual arithmetic average of magnesium oxide content for each type of lime product produced (metric tons MgO/metric ton lime).

(11) Annual arithmetic average of calcium oxide content for each type of calcined lime byproduct/waste sold (metric tons CaO/metric ton lime).

(12) Annual arithmetic average of magnesium oxide content for each type of calcined lime byproduct/waste sold (metric tons MgO/metric ton lime).

(13) Annual arithmetic average of calcium oxide content for each type of calcined lime byproduct/waste not sold (metric tons CaO/metric ton lime).

(14) Annual arithmetic average of magnesium oxide content for each type of calcined lime byproduct/waste not sold (metric tons MgO/metric ton lime)

(a) If a CEMS is used to measure CO2 emissions, then you must report under this subpart the relevant information required by § 98.36 and the information listed in paragraphs (a)(1) through (14) of this section.

(9) Annual arithmetic average of calcium oxide content for each type of lime product produced (metric tons CaO/metric ton lime).

(10) Annual arithmetic average of magnesium oxide content for each type of lime product produced (metric tons MgO/metric ton lime).

(11) Annual arithmetic average of calcium oxide content for each type of calcined lime byproduct/waste sold (metric tons CaO/metric ton lime).

(12) Annual arithmetic average of magnesium oxide content for each type of calcined lime byproduct/waste sold (metric tons MgO/metric ton lime).

(13) Annual arithmetic average of calcium oxide content for each type of calcined lime byproduct/waste not sold (metric tons CaO/metric ton lime).

(14) Annual arithmetic average of magnesium oxide content for each type of calcined lime byproduct/waste not sold (metric tons MgO/metric ton lime)

(a) If a CEMS is used to measure CO2 emissions, then you must report under this subpart the relevant information required by § 98.36 and the information listed in paragraphs (a)(1) through (14) of this section.

(9) Annual arithmetic average of calcium oxide content for each type of lime product produced (metric tons CaO/metric ton lime).

(10) Annual arithmetic average of magnesium oxide content for each type of lime product produced (metric tons MgO/metric ton lime).

(11) Annual arithmetic average of calcium oxide content for each type of calcined lime byproduct/waste sold (metric tons CaO/metric ton lime).

(12) Annual arithmetic average of magnesium oxide content for each type of calcined lime byproduct/waste sold (metric tons MgO/metric ton lime).

(13) Annual arithmetic average of calcium oxide content for each type of calcined lime byproduct/waste not sold (metric tons CaO/metric ton lime).

(14) Annual arithmetic average of magnesium oxide content for each type of calcined lime byproduct/waste not sold (metric tons MgO/metric ton lime)

(a) If a CEMS is used to measure CO2 emissions, then you must report under this subpart the relevant information required by § 98.36 and the information listed in paragraphs (a)(1) through (14) of this section.

(9) Annual arithmetic average of calcium oxide content for each type of lime product produced (metric tons CaO/metric ton lime).

(10) Annual arithmetic average of magnesium oxide content for each type of lime product produced (metric tons MgO/metric ton lime).

(11) Annual arithmetic average of calcium oxide content for each type of calcined lime byproduct/waste sold (metric tons CaO/metric ton lime).

(12) Annual arithmetic average of magnesium oxide content for each type of calcined lime byproduct/waste sold (metric tons MgO/metric ton lime).

(13) Annual arithmetic average of calcium oxide content for each type of calcined lime byproduct/waste not sold (metric tons CaO/metric ton lime).

(14) Annual arithmetic average of magnesium oxide content for each type of calcined lime byproduct/waste not sold (metric tons MgO/metric ton lime)

(a) If a CEMS is used to measure CO2 emissions, then you must report under this subpart the relevant information required by § 98.36 and the information listed in paragraphs (a)(1) through (14) of this section.

(9) Annual arithmetic average of calcium oxide content for each type of lime product produced (metric tons CaO/metric ton lime).

(10) Annual arithmetic average of magnesium oxide content for each type of lime product produced (metric tons MgO/metric ton lime).

(11) Annual arithmetic average of calcium oxide content for each type of calcined lime byproduct/waste sold (metric tons CaO/metric ton lime).

(12) Annual arithmetic average of magnesium oxide content for each type of calcined lime byproduct/waste sold (metric tons MgO/metric ton lime).

(13) Annual arithmetic average of calcium oxide content for each type of calcined lime byproduct/waste not sold (metric tons CaO/metric ton lime).

(14) Annual arithmetic average of magnesium oxide content for each type of calcined lime byproduct/waste not sold (metric tons MgO/metric ton lime)

(a) If a CEMS is used to measure CO2 emissions, then you must report under this subpart the relevant information required by § 98.36 and the information listed in paragraphs (a)(1) through (14) of this section.

(9) Annual arithmetic average of calcium oxide content for each type of lime product produced (metric tons CaO/metric ton lime).

(10) Annual arithmetic average of magnesium oxide content for each type of lime product produced (metric tons MgO/metric ton lime).

(11) Annual arithmetic average of calcium oxide content for each type of calcined lime byproduct/waste sold (metric tons CaO/metric ton lime).

(12) Annual arithmetic average of magnesium oxide content for each type of calcined lime byproduct/waste sold (metric tons MgO/metric ton lime).

(13) Annual arithmetic average of calcium oxide content for each type of calcined lime byproduct/waste not sold (metric tons CaO/metric ton lime).

(14) Annual arithmetic average of magnesium oxide content for each type of calcined lime byproduct/waste not sold (metric tons MgO/metric ton lime)

(b) If a CEMS is not used to measure CO2 emissions, then you must report the information listed in paragraphs (b)(1) through (23) of this section.

(2) -(3) [Reserved]

(4) Standard method used (ASTM or NLA testing method) to determine chemical compositions of each lime type produced and each calcined lime byproduct or waste type.

(5) -(6) [Reserved]

(8) [Reserved]

(10) -(12) [Reserved]

(16) Number of times in the reporting year that missing data procedures were followed to measure lime production (months) or the chemical composition of lime products sold (months).

(17) Indicate whether CO2 was captured and used on-site (e.g., for use in a purification process, the manufacture of another product). If CO2 was captured and used on-site, provide the information in paragraphs (b)(17)(i) and (ii) of this section.

(21) Annual average results of chemical composition analysis of each type of lime product produced and calcined byproduct/waste sold.

(b) If a CEMS is not used to measure CO2 emissions, then you must report the information listed in paragraphs (b)(1) through (23) of this section.

(2) -(3) [Reserved]

(4) Standard method used (ASTM or NLA testing method) to determine chemical compositions of each lime type produced and each calcined lime byproduct or waste type.

(5) -(6) [Reserved]

(8) [Reserved]

(10) -(12) [Reserved]

(16) Number of times in the reporting year that missing data procedures were followed to measure lime production (months) or the chemical composition of lime products sold (months).

(17) Indicate whether CO2 was captured and used on-site (e.g., for use in a purification process, the manufacture of another product). If CO2 was captured and used on-site, provide the information in paragraphs (b)(17)(i) and (ii) of this section.

(21) Annual average results of chemical composition analysis of each type of lime product produced and calcined byproduct/waste sold.

(b) If a CEMS is not used to measure CO2 emissions, then you must report the information listed in paragraphs (b)(1) through (23) of this section.

(2) -(3) [Reserved]

(4) Standard method used (ASTM or NLA testing method) to determine chemical compositions of each lime type produced and each calcined lime byproduct or waste type.

(5) -(6) [Reserved]

(8) [Reserved]

(10) -(12) [Reserved]

(16) Number of times in the reporting year that missing data procedures were followed to measure lime production (months) or the chemical composition of lime products sold (months).

(17) Indicate whether CO2 was captured and used on-site (e.g., for use in a purification process, the manufacture of another product). If CO2 was captured and used on-site, provide the information in paragraphs (b)(17)(i) and (ii) of this section.

(21) Annual average results of chemical composition analysis of each type of lime product produced and calcined byproduct/waste sold.

(b) If a CEMS is not used to measure CO2 emissions, then you must report the information listed in paragraphs (b)(1) through (23) of this section.

(2) -(3) [Reserved]

(4) Standard method used (ASTM or NLA testing method) to determine chemical compositions of each lime type produced and each calcined lime byproduct or waste type.

(5) -(6) [Reserved]

(8) [Reserved]

(10) -(12) [Reserved]

(16) Number of times in the reporting year that missing data procedures were followed to measure lime production (months) or the chemical composition of lime products sold (months).

(17) Indicate whether CO2 was captured and used on-site (e.g., for use in a purification process, the manufacture of another product). If CO2 was captured and used on-site, provide the information in paragraphs (b)(17)(i) and (ii) of this section.

(21) Annual average results of chemical composition analysis of each type of lime product produced and calcined byproduct/waste sold.

(b) If a CEMS is not used to measure CO2 emissions, then you must report the information listed in paragraphs (b)(1) through (23) of this section.

(2) -(3) [Reserved]

(4) Standard method used (ASTM or NLA testing method) to determine chemical compositions of each lime type produced and each calcined lime byproduct or waste type.

(5) -(6) [Reserved]

(8) [Reserved]

(10) -(12) [Reserved]

(16) Number of times in the reporting year that missing data procedures were followed to measure lime production (months) or the chemical composition of lime products sold (months).

(17) Indicate whether CO2 was captured and used on-site (e.g., for use in a purification process, the manufacture of another product). If CO2 was captured and used on-site, provide the information in paragraphs (b)(17)(i) and (ii) of this section.

(21) Annual average results of chemical composition analysis of each type of lime product produced and calcined byproduct/waste sold.

(b) If a CEMS is not used to measure CO2 emissions, then you must report the information listed in paragraphs (b)(1) through (23) of this section.

(2) -(3) [Reserved]

(4) Standard method used (ASTM or NLA testing method) to determine chemical compositions of each lime type produced and each calcined lime byproduct or waste type.

(5) -(6) [Reserved]

(8) [Reserved]

(10) -(12) [Reserved]

(16) Number of times in the reporting year that missing data procedures were followed to measure lime production (months) or the chemical composition of lime products sold (months).

(17) Indicate whether CO2 was captured and used on-site (e.g., for use in a purification process, the manufacture of another product). If CO2 was captured and used on-site, provide the information in paragraphs (b)(17)(i) and (ii) of this section.

(21) Annual average results of chemical composition analysis of each type of lime product produced and calcined byproduct/waste sold.

(b) If a CEMS is not used to measure CO2 emissions, then you must report the information listed in paragraphs (b)(1) through (23) of this section.

(2) -(3) [Reserved]

(4) Standard method used (ASTM or NLA testing method) to determine chemical compositions of each lime type produced and each calcined lime byproduct or waste type.

(5) -(6) [Reserved]

(8) [Reserved]

(10) -(12) [Reserved]

(16) Number of times in the reporting year that missing data procedures were followed to measure lime production (months) or the chemical composition of lime products sold (months).

(17) Indicate whether CO2 was captured and used on-site (e.g., for use in a purification process, the manufacture of another product). If CO2 was captured and used on-site, provide the information in paragraphs (b)(17)(i) and (ii) of this section.

(21) Annual average results of chemical composition analysis of each type of lime product produced and calcined byproduct/waste sold.

(b) If a CEMS is not used to measure CO2 emissions, then you must report the information listed in paragraphs (b)(1) through (23) of this section.

(2) -(3) [Reserved]

(4) Standard method used (ASTM or NLA testing method) to determine chemical compositions of each lime type produced and each calcined lime byproduct or waste type.

(5) -(6) [Reserved]

(8) [Reserved]

(10) -(12) [Reserved]

(16) Number of times in the reporting year that missing data procedures were followed to measure lime production (months) or the chemical composition of lime products sold (months).

(17) Indicate whether CO2 was captured and used on-site (e.g., for use in a purification process, the manufacture of another product). If CO2 was captured and used on-site, provide the information in paragraphs (b)(17)(i) and (ii) of this section.

(21) Annual average results of chemical composition analysis of each type of lime product produced and calcined byproduct/waste sold.

(b) If a CEMS is not used to measure CO2 emissions, then you must report the information listed in paragraphs (b)(1) through (23) of this section.

(2) -(3) [Reserved]

(4) Standard method used (ASTM or NLA testing method) to determine chemical compositions of each lime type produced and each calcined lime byproduct or waste type.

(5) -(6) [Reserved]

(8) [Reserved]

(10) -(12) [Reserved]

(16) Number of times in the reporting year that missing data procedures were followed to measure lime production (months) or the chemical composition of lime products sold (months).

(17) Indicate whether CO2 was captured and used on-site (e.g., for use in a purification process, the manufacture of another product). If CO2 was captured and used on-site, provide the information in paragraphs (b)(17)(i) and (ii) of this section.

(21) Annual average results of chemical composition analysis of each type of lime product produced and calcined byproduct/waste sold.

(b) If a CEMS is not used to measure CO2 emissions, then you must report the information listed in paragraphs (b)(1) through (23) of this section.

(2) -(3) [Reserved]

(4) Standard method used (ASTM or NLA testing method) to determine chemical compositions of each lime type produced and each calcined lime byproduct or waste type.

(5) -(6) [Reserved]

(8) [Reserved]

(10) -(12) [Reserved]

(16) Number of times in the reporting year that missing data procedures were followed to measure lime production (months) or the chemical composition of lime products sold (months).

(17) Indicate whether CO2 was captured and used on-site (e.g., for use in a purification process, the manufacture of another product). If CO2 was captured and used on-site, provide the information in paragraphs (b)(17)(i) and (ii) of this section.

(21) Annual average results of chemical composition analysis of each type of lime product produced and calcined byproduct/waste sold.

(b) If a CEMS is not used to measure CO2 emissions, then you must report the information listed in paragraphs (b)(1) through (23) of this section.

(2) -(3) [Reserved]

(4) Standard method used (ASTM or NLA testing method) to determine chemical compositions of each lime type produced and each calcined lime byproduct or waste type.

(5) -(6) [Reserved]

(8) [Reserved]

(10) -(12) [Reserved]

(16) Number of times in the reporting year that missing data procedures were followed to measure lime production (months) or the chemical composition of lime products sold (months).

(17) Indicate whether CO2 was captured and used on-site (e.g., for use in a purification process, the manufacture of another product). If CO2 was captured and used on-site, provide the information in paragraphs (b)(17)(i) and (ii) of this section.

(21) Annual average results of chemical composition analysis of each type of lime product produced and calcined byproduct/waste sold.

(b) If a CEMS is not used to measure CO2 emissions, then you must report the information listed in paragraphs (b)(1) through (23) of this section.

(2) -(3) [Reserved]

(4) Standard method used (ASTM or NLA testing method) to determine chemical compositions of each lime type produced and each calcined lime byproduct or waste type.

(5) -(6) [Reserved]

(8) [Reserved]

(10) -(12) [Reserved]

(16) Number of times in the reporting year that missing data procedures were followed to measure lime production (months) or the chemical composition of lime products sold (months).

(17) Indicate whether CO2 was captured and used on-site (e.g., for use in a purification process, the manufacture of another product). If CO2 was captured and used on-site, provide the information in paragraphs (b)(17)(i) and (ii) of this section.

(21) Annual average results of chemical composition analysis of each type of lime product produced and calcined byproduct/waste sold.

(b) If a CEMS is not used to measure CO2 emissions, then you must report the information listed in paragraphs (b)(1) through (23) of this section.

(2) -(3) [Reserved]

(4) Standard method used (ASTM or NLA testing method) to determine chemical compositions of each lime type produced and each calcined lime byproduct or waste type.

(5) -(6) [Reserved]

(8) [Reserved]

(10) -(12) [Reserved]

(16) Number of times in the reporting year that missing data procedures were followed to measure lime production (months) or the chemical composition of lime products sold (months).

(17) Indicate whether CO2 was captured and used on-site (e.g., for use in a purification process, the manufacture of another product). If CO2 was captured and used on-site, provide the information in paragraphs (b)(17)(i) and (ii) of this section.

(21) Annual average results of chemical composition analysis of each type of lime product produced and calcined byproduct/waste sold.

(b) If a CEMS is not used to measure CO2 emissions, then you must report the information listed in paragraphs (b)(1) through (23) of this section.

(2) -(3) [Reserved]

(4) Standard method used (ASTM or NLA testing method) to determine chemical compositions of each lime type produced and each calcined lime byproduct or waste type.

(5) -(6) [Reserved]

(8) [Reserved]

(10) -(12) [Reserved]

(16) Number of times in the reporting year that missing data procedures were followed to measure lime production (months) or the chemical composition of lime products sold (months).

(17) Indicate whether CO2 was captured and used on-site (e.g., for use in a purification process, the manufacture of another product). If CO2 was captured and used on-site, provide the information in paragraphs (b)(17)(i) and (ii) of this section.

(21) Annual average results of chemical composition analysis of each type of lime product produced and calcined byproduct/waste sold.

(b) If a CEMS is not used to measure CO2 emissions, then you must report the information listed in paragraphs (b)(1) through (23) of this section.

(2) -(3) [Reserved]

(4) Standard method used (ASTM or NLA testing method) to determine chemical compositions of each lime type produced and each calcined lime byproduct or waste type.

(5) -(6) [Reserved]

(8) [Reserved]

(10) -(12) [Reserved]

(16) Number of times in the reporting year that missing data procedures were followed to measure lime production (months) or the chemical composition of lime products sold (months).

(17) Indicate whether CO2 was captured and used on-site (e.g., for use in a purification process, the manufacture of another product). If CO2 was captured and used on-site, provide the information in paragraphs (b)(17)(i) and (ii) of this section.

(21) Annual average results of chemical composition analysis of each type of lime product produced and calcined byproduct/waste sold.

(b) If a CEMS is not used to measure CO2 emissions, then you must report the information listed in paragraphs (b)(1) through (23) of this section.

(2) -(3) [Reserved]

(4) Standard method used (ASTM or NLA testing method) to determine chemical compositions of each lime type produced and each calcined lime byproduct or waste type.

(5) -(6) [Reserved]

(8) [Reserved]

(10) -(12) [Reserved]

(16) Number of times in the reporting year that missing data procedures were followed to measure lime production (months) or the chemical composition of lime products sold (months).

(17) Indicate whether CO2 was captured and used on-site (e.g., for use in a purification process, the manufacture of another product). If CO2 was captured and used on-site, provide the information in paragraphs (b)(17)(i) and (ii) of this section.

(21) Annual average results of chemical composition analysis of each type of lime product produced and calcined byproduct/waste sold.

(b) If a CEMS is not used to measure CO2 emissions, then you must report the information listed in paragraphs (b)(1) through (23) of this section.

(2) -(3) [Reserved]

(4) Standard method used (ASTM or NLA testing method) to determine chemical compositions of each lime type produced and each calcined lime byproduct or waste type.

(5) -(6) [Reserved]

(8) [Reserved]

(10) -(12) [Reserved]

(16) Number of times in the reporting year that missing data procedures were followed to measure lime production (months) or the chemical composition of lime products sold (months).

(17) Indicate whether CO2 was captured and used on-site (e.g., for use in a purification process, the manufacture of another product). If CO2 was captured and used on-site, provide the information in paragraphs (b)(17)(i) and (ii) of this section.

(21) Annual average results of chemical composition analysis of each type of lime product produced and calcined byproduct/waste sold.

(b) If a CEMS is not used to measure CO2 emissions, then you must report the information listed in paragraphs (b)(1) through (23) of this section.

(2) -(3) [Reserved]

(4) Standard method used (ASTM or NLA testing method) to determine chemical compositions of each lime type produced and each calcined lime byproduct or waste type.

(5) -(6) [Reserved]

(8) [Reserved]

(10) -(12) [Reserved]

(16) Number of times in the reporting year that missing data procedures were followed to measure lime production (months) or the chemical composition of lime products sold (months).

(17) Indicate whether CO2 was captured and used on-site (e.g., for use in a purification process, the manufacture of another product). If CO2 was captured and used on-site, provide the information in paragraphs (b)(17)(i) and (ii) of this section.

(21) Annual average results of chemical composition analysis of each type of lime product produced and calcined byproduct/waste sold.

(b) If a CEMS is not used to measure CO2 emissions, then you must report the information listed in paragraphs (b)(1) through (23) of this section.

(2) -(3) [Reserved]

(4) Standard method used (ASTM or NLA testing method) to determine chemical compositions of each lime type produced and each calcined lime byproduct or waste type.

(5) -(6) [Reserved]

(8) [Reserved]

(10) -(12) [Reserved]

(16) Number of times in the reporting year that missing data procedures were followed to measure lime production (months) or the chemical composition of lime products sold (months).

(17) Indicate whether CO2 was captured and used on-site (e.g., for use in a purification process, the manufacture of another product). If CO2 was captured and used on-site, provide the information in paragraphs (b)(17)(i) and (ii) of this section.

(21) Annual average results of chemical composition analysis of each type of lime product produced and calcined byproduct/waste sold.