§98.186. Data reporting procedures. — Inbound Citations

(a) If a CEMS is used to measure CO2 emissions according to the requirements in § 98.183(a) or (b)(1), then you must report under this subpart the relevant information required by § 98.36 and the information specified in paragraphs (a)(1) through (a)(4) of this section.

(a) If a CEMS is used to measure CO2 emissions according to the requirements in § 98.183(a) or (b)(1), then you must report under this subpart the relevant information required by § 98.36 and the information specified in paragraphs (a)(1) through (a)(4) of this section.

(a) If a CEMS is used to measure CO2 emissions according to the requirements in § 98.183(a) or (b)(1), then you must report under this subpart the relevant information required by § 98.36 and the information specified in paragraphs (a)(1) through (a)(4) of this section.

(a) If a CEMS is used to measure CO2 emissions according to the requirements in § 98.183(a) or (b)(1), then you must report under this subpart the relevant information required by § 98.36 and the information specified in paragraphs (a)(1) through (a)(4) of this section.

(b) If a CEMS is not used to measure CO2 emissions, and you measure CO2 emissions according to the requirements in § 98.183(b)(2)(i) and (b)(2)(ii), then you must report the information specified in paragraphs (b)(1) through (b)(9) of this section.

(2) Annual process CO2 emissions (in metric tons) from each smelting furnace as determined by Equation R-1 of this subpart.

(5) Total number of smelting furnaces at facility used for production of lead products reported in paragraph (b)(4) of this section.

(6) -(7) [Reserved]

(8) List the method used for the determination of carbon content for each material used for the calculation of annual process CO2 emissions using Equation R-1 of § 98.183 for each smelting furnace (e.g., supplier provided information, analyses of representative samples you collected).

(9) If you use the missing data procedures in § 98.185(b), you must report how the monthly mass of carbon-containing materials with missing data was determined and the number of months the missing data procedures were used.

(b) If a CEMS is not used to measure CO2 emissions, and you measure CO2 emissions according to the requirements in § 98.183(b)(2)(i) and (b)(2)(ii), then you must report the information specified in paragraphs (b)(1) through (b)(9) of this section.

(2) Annual process CO2 emissions (in metric tons) from each smelting furnace as determined by Equation R-1 of this subpart.

(5) Total number of smelting furnaces at facility used for production of lead products reported in paragraph (b)(4) of this section.

(6) -(7) [Reserved]

(8) List the method used for the determination of carbon content for each material used for the calculation of annual process CO2 emissions using Equation R-1 of § 98.183 for each smelting furnace (e.g., supplier provided information, analyses of representative samples you collected).

(9) If you use the missing data procedures in § 98.185(b), you must report how the monthly mass of carbon-containing materials with missing data was determined and the number of months the missing data procedures were used.

(b) If a CEMS is not used to measure CO2 emissions, and you measure CO2 emissions according to the requirements in § 98.183(b)(2)(i) and (b)(2)(ii), then you must report the information specified in paragraphs (b)(1) through (b)(9) of this section.

(2) Annual process CO2 emissions (in metric tons) from each smelting furnace as determined by Equation R-1 of this subpart.

(5) Total number of smelting furnaces at facility used for production of lead products reported in paragraph (b)(4) of this section.

(6) -(7) [Reserved]

(8) List the method used for the determination of carbon content for each material used for the calculation of annual process CO2 emissions using Equation R-1 of § 98.183 for each smelting furnace (e.g., supplier provided information, analyses of representative samples you collected).

(9) If you use the missing data procedures in § 98.185(b), you must report how the monthly mass of carbon-containing materials with missing data was determined and the number of months the missing data procedures were used.

(b) If a CEMS is not used to measure CO2 emissions, and you measure CO2 emissions according to the requirements in § 98.183(b)(2)(i) and (b)(2)(ii), then you must report the information specified in paragraphs (b)(1) through (b)(9) of this section.

(2) Annual process CO2 emissions (in metric tons) from each smelting furnace as determined by Equation R-1 of this subpart.

(5) Total number of smelting furnaces at facility used for production of lead products reported in paragraph (b)(4) of this section.

(6) -(7) [Reserved]

(8) List the method used for the determination of carbon content for each material used for the calculation of annual process CO2 emissions using Equation R-1 of § 98.183 for each smelting furnace (e.g., supplier provided information, analyses of representative samples you collected).

(9) If you use the missing data procedures in § 98.185(b), you must report how the monthly mass of carbon-containing materials with missing data was determined and the number of months the missing data procedures were used.

(b) If a CEMS is not used to measure CO2 emissions, and you measure CO2 emissions according to the requirements in § 98.183(b)(2)(i) and (b)(2)(ii), then you must report the information specified in paragraphs (b)(1) through (b)(9) of this section.

(2) Annual process CO2 emissions (in metric tons) from each smelting furnace as determined by Equation R-1 of this subpart.

(5) Total number of smelting furnaces at facility used for production of lead products reported in paragraph (b)(4) of this section.

(6) -(7) [Reserved]

(8) List the method used for the determination of carbon content for each material used for the calculation of annual process CO2 emissions using Equation R-1 of § 98.183 for each smelting furnace (e.g., supplier provided information, analyses of representative samples you collected).

(9) If you use the missing data procedures in § 98.185(b), you must report how the monthly mass of carbon-containing materials with missing data was determined and the number of months the missing data procedures were used.

(b) If a CEMS is not used to measure CO2 emissions, and you measure CO2 emissions according to the requirements in § 98.183(b)(2)(i) and (b)(2)(ii), then you must report the information specified in paragraphs (b)(1) through (b)(9) of this section.

(2) Annual process CO2 emissions (in metric tons) from each smelting furnace as determined by Equation R-1 of this subpart.

(5) Total number of smelting furnaces at facility used for production of lead products reported in paragraph (b)(4) of this section.

(6) -(7) [Reserved]

(8) List the method used for the determination of carbon content for each material used for the calculation of annual process CO2 emissions using Equation R-1 of § 98.183 for each smelting furnace (e.g., supplier provided information, analyses of representative samples you collected).

(9) If you use the missing data procedures in § 98.185(b), you must report how the monthly mass of carbon-containing materials with missing data was determined and the number of months the missing data procedures were used.

(b) If a CEMS is not used to measure CO2 emissions, and you measure CO2 emissions according to the requirements in § 98.183(b)(2)(i) and (b)(2)(ii), then you must report the information specified in paragraphs (b)(1) through (b)(9) of this section.

(2) Annual process CO2 emissions (in metric tons) from each smelting furnace as determined by Equation R-1 of this subpart.

(5) Total number of smelting furnaces at facility used for production of lead products reported in paragraph (b)(4) of this section.

(6) -(7) [Reserved]

(8) List the method used for the determination of carbon content for each material used for the calculation of annual process CO2 emissions using Equation R-1 of § 98.183 for each smelting furnace (e.g., supplier provided information, analyses of representative samples you collected).

(9) If you use the missing data procedures in § 98.185(b), you must report how the monthly mass of carbon-containing materials with missing data was determined and the number of months the missing data procedures were used.

(b) If a CEMS is not used to measure CO2 emissions, and you measure CO2 emissions according to the requirements in § 98.183(b)(2)(i) and (b)(2)(ii), then you must report the information specified in paragraphs (b)(1) through (b)(9) of this section.

(2) Annual process CO2 emissions (in metric tons) from each smelting furnace as determined by Equation R-1 of this subpart.

(5) Total number of smelting furnaces at facility used for production of lead products reported in paragraph (b)(4) of this section.

(6) -(7) [Reserved]

(8) List the method used for the determination of carbon content for each material used for the calculation of annual process CO2 emissions using Equation R-1 of § 98.183 for each smelting furnace (e.g., supplier provided information, analyses of representative samples you collected).

(9) If you use the missing data procedures in § 98.185(b), you must report how the monthly mass of carbon-containing materials with missing data was determined and the number of months the missing data procedures were used.