§98.154. Monitoring and QA/QC requirements. — Inbound Citations

(1) Factor to account for the loss of HCFC-22 upstream of the measurement over the period, determined pursuant to § 98.154(e) (Equation O-3 of § 98.153).

(d) If the HFC-23 concentration measured pursuant to § 98.154(l) is greater than that measured during the performance test that is the basis for the destruction efficiency (DE), the facility shall report the method used to calculate the revised destruction efficiency, specifying whether § 98.154(l)(1) or (2) has been used for the calculation.

(d) If the HFC-23 concentration measured pursuant to § 98.154(l) is greater than that measured during the performance test that is the basis for the destruction efficiency (DE), the facility shall report the method used to calculate the revised destruction efficiency, specifying whether § 98.154(l)(1) or (2) has been used for the calculation.

(10) Mass of HFC-23 fed into each destruction device annually per HCFC-22 production process (metric tons) (Equation O-9 of § 98.153 and the calculation method in either § 98.154(l)(1) or (2)).

(d) If the HFC-23 concentration measured pursuant to § 98.154(l) is greater than that measured during the performance test that is the basis for the destruction efficiency (DE), the facility shall report the method used to calculate the revised destruction efficiency, specifying whether § 98.154(l)(1) or (2) has been used for the calculation.

(10) Mass of HFC-23 fed into each destruction device annually per HCFC-22 production process (metric tons) (Equation O-9 of § 98.153 and the calculation method in either § 98.154(l)(1) or (2)).

(2) Records documenting the initial and periodic calibration of the gas chromatographs, weigh scales, volumetric and density measurements, and flowmeters used to measure the quantities reported under this rule, including the industry standards or manufacturer directions used for calibration pursuant to § 98.154(p) and (q).

(2) Records documenting the initial and periodic calibration of the gas chromatographs, weigh scales, volumetric and density measurements, and flowmeters used to measure the quantities reported under this rule, including the industry standards or manufacturer directions used for calibration pursuant to § 98.154(p) and (q).