§98.147. Records that must be retained. — Inbound Citations

In addition to the information required by § 98.3(g), you must retain the records listed in paragraphs (a) through (d) of this section.

(a) If a CEMS is used to measure emissions, then you must retain the records required under § 98.37 for the Tier 4 Calculation Methodology and the following information specified in paragraphs (a)(1) through (3) of this section:

(2) Monthly amount of each carbonate-based raw material charged to each continuous glass melting furnace (tons).

(3) Monthly amount (tons) of recycled scrap glass (cullet) charged to each continuous glass melting furnace, by glass type.

(a) If a CEMS is used to measure emissions, then you must retain the records required under § 98.37 for the Tier 4 Calculation Methodology and the following information specified in paragraphs (a)(1) through (3) of this section:

(2) Monthly amount of each carbonate-based raw material charged to each continuous glass melting furnace (tons).

(3) Monthly amount (tons) of recycled scrap glass (cullet) charged to each continuous glass melting furnace, by glass type.

(a) If a CEMS is used to measure emissions, then you must retain the records required under § 98.37 for the Tier 4 Calculation Methodology and the following information specified in paragraphs (a)(1) through (3) of this section:

(2) Monthly amount of each carbonate-based raw material charged to each continuous glass melting furnace (tons).

(3) Monthly amount (tons) of recycled scrap glass (cullet) charged to each continuous glass melting furnace, by glass type.

In addition to the information required by § 98.3(g), you must retain the records listed in paragraphs (a) through (d) of this section.

(b) If process CO2 emissions are calculated according to the procedures specified in § 98.143(b), you must retain the records in paragraphs (b)(1) through (6) of this section.

(2) Monthly amount of each carbonate-based raw material charged to each continuous glass melting furnace (tons).

(3) Monthly amount (tons) of recycled scrap glass (cullet) charged to each continuous glass melting furnace, by glass type.

(4) Data on carbonate-based mineral mass fractions provided by the raw material supplier for all raw materials consumed annually and included in calculating process emissions in equation N-1 to § 98.143, if applicable.

(5) Results of all tests, if applicable, used to verify the carbonate-based mineral mass fraction for each carbonate-based raw material charged to a continuous glass melting furnace, including the data specified in paragraphs (b)(5)(i) through (v) of this section.

(6) The decimal fraction of calcination achieved for each carbonate-based raw material, if a value other than 1.0 is used to calculate process mass emissions of CO2.

(b) If process CO2 emissions are calculated according to the procedures specified in § 98.143(b), you must retain the records in paragraphs (b)(1) through (6) of this section.

(2) Monthly amount of each carbonate-based raw material charged to each continuous glass melting furnace (tons).

(3) Monthly amount (tons) of recycled scrap glass (cullet) charged to each continuous glass melting furnace, by glass type.

(4) Data on carbonate-based mineral mass fractions provided by the raw material supplier for all raw materials consumed annually and included in calculating process emissions in equation N-1 to § 98.143, if applicable.

(5) Results of all tests, if applicable, used to verify the carbonate-based mineral mass fraction for each carbonate-based raw material charged to a continuous glass melting furnace, including the data specified in paragraphs (b)(5)(i) through (v) of this section.

(6) The decimal fraction of calcination achieved for each carbonate-based raw material, if a value other than 1.0 is used to calculate process mass emissions of CO2.

(b) If process CO2 emissions are calculated according to the procedures specified in § 98.143(b), you must retain the records in paragraphs (b)(1) through (6) of this section.

(2) Monthly amount of each carbonate-based raw material charged to each continuous glass melting furnace (tons).

(3) Monthly amount (tons) of recycled scrap glass (cullet) charged to each continuous glass melting furnace, by glass type.

(4) Data on carbonate-based mineral mass fractions provided by the raw material supplier for all raw materials consumed annually and included in calculating process emissions in equation N-1 to § 98.143, if applicable.

(5) Results of all tests, if applicable, used to verify the carbonate-based mineral mass fraction for each carbonate-based raw material charged to a continuous glass melting furnace, including the data specified in paragraphs (b)(5)(i) through (v) of this section.

(6) The decimal fraction of calcination achieved for each carbonate-based raw material, if a value other than 1.0 is used to calculate process mass emissions of CO2.

(b) If process CO2 emissions are calculated according to the procedures specified in § 98.143(b), you must retain the records in paragraphs (b)(1) through (6) of this section.

(2) Monthly amount of each carbonate-based raw material charged to each continuous glass melting furnace (tons).

(3) Monthly amount (tons) of recycled scrap glass (cullet) charged to each continuous glass melting furnace, by glass type.

(4) Data on carbonate-based mineral mass fractions provided by the raw material supplier for all raw materials consumed annually and included in calculating process emissions in equation N-1 to § 98.143, if applicable.

(5) Results of all tests, if applicable, used to verify the carbonate-based mineral mass fraction for each carbonate-based raw material charged to a continuous glass melting furnace, including the data specified in paragraphs (b)(5)(i) through (v) of this section.

(6) The decimal fraction of calcination achieved for each carbonate-based raw material, if a value other than 1.0 is used to calculate process mass emissions of CO2.

(b) If process CO2 emissions are calculated according to the procedures specified in § 98.143(b), you must retain the records in paragraphs (b)(1) through (6) of this section.

(2) Monthly amount of each carbonate-based raw material charged to each continuous glass melting furnace (tons).

(3) Monthly amount (tons) of recycled scrap glass (cullet) charged to each continuous glass melting furnace, by glass type.

(4) Data on carbonate-based mineral mass fractions provided by the raw material supplier for all raw materials consumed annually and included in calculating process emissions in equation N-1 to § 98.143, if applicable.

(5) Results of all tests, if applicable, used to verify the carbonate-based mineral mass fraction for each carbonate-based raw material charged to a continuous glass melting furnace, including the data specified in paragraphs (b)(5)(i) through (v) of this section.

(6) The decimal fraction of calcination achieved for each carbonate-based raw material, if a value other than 1.0 is used to calculate process mass emissions of CO2.

(5) Results of all tests, if applicable, used to verify the carbonate-based mineral mass fraction for each carbonate-based raw material charged to a continuous glass melting furnace, including the data specified in paragraphs (b)(5)(i) through (v) of this section.

(5) Results of all tests, if applicable, used to verify the carbonate-based mineral mass fraction for each carbonate-based raw material charged to a continuous glass melting furnace, including the data specified in paragraphs (b)(5)(i) through (v) of this section.

(5) Results of all tests, if applicable, used to verify the carbonate-based mineral mass fraction for each carbonate-based raw material charged to a continuous glass melting furnace, including the data specified in paragraphs (b)(5)(i) through (v) of this section.

(5) Results of all tests, if applicable, used to verify the carbonate-based mineral mass fraction for each carbonate-based raw material charged to a continuous glass melting furnace, including the data specified in paragraphs (b)(5)(i) through (v) of this section.

(5) Results of all tests, if applicable, used to verify the carbonate-based mineral mass fraction for each carbonate-based raw material charged to a continuous glass melting furnace, including the data specified in paragraphs (b)(5)(i) through (v) of this section.

(b) If process CO2 emissions are calculated according to the procedures specified in § 98.143(b), you must retain the records in paragraphs (b)(1) through (6) of this section.

(2) Monthly amount of each carbonate-based raw material charged to each continuous glass melting furnace (tons).

(3) Monthly amount (tons) of recycled scrap glass (cullet) charged to each continuous glass melting furnace, by glass type.

(4) Data on carbonate-based mineral mass fractions provided by the raw material supplier for all raw materials consumed annually and included in calculating process emissions in equation N-1 to § 98.143, if applicable.

(5) Results of all tests, if applicable, used to verify the carbonate-based mineral mass fraction for each carbonate-based raw material charged to a continuous glass melting furnace, including the data specified in paragraphs (b)(5)(i) through (v) of this section.

(6) The decimal fraction of calcination achieved for each carbonate-based raw material, if a value other than 1.0 is used to calculate process mass emissions of CO2.

In addition to the information required by § 98.3(g), you must retain the records listed in paragraphs (a) through (d) of this section.

In addition to the information required by § 98.3(g), you must retain the records listed in paragraphs (a) through (d) of this section.

(d) You must keep a record of the file generated by the verification software specified in § 98.5(b) for the applicable data specified in paragraphs (d)(1) through (3) of this section. Retention of this file satisfies the recordkeeping requirement for the data in paragraphs (d)(1) through (3) of this section.

(1) Annual average decimal mass fraction of carbonate-based mineral in each carbonate-based raw material for each continuous glass melting furnace (specify the default value, if used, or the value determined according to § 98.144) (percentage, expressed as a decimal) (Equation N-1 of § 98.143).

(2) Annual amount of each carbonate-based raw material charged to each continuous glass melting furnace (tons) (Equation N-1 of this subpart).

(3) Decimal fraction of calcination achieved for each carbonate-based raw material for each continuous glass melting furnace (specify the default value, if used, or the value determined according to § 98.144) (percentage, expressed as a decimal) (Equation N-1 of this subpart).

(d) You must keep a record of the file generated by the verification software specified in § 98.5(b) for the applicable data specified in paragraphs (d)(1) through (3) of this section. Retention of this file satisfies the recordkeeping requirement for the data in paragraphs (d)(1) through (3) of this section.

(1) Annual average decimal mass fraction of carbonate-based mineral in each carbonate-based raw material for each continuous glass melting furnace (specify the default value, if used, or the value determined according to § 98.144) (percentage, expressed as a decimal) (Equation N-1 of § 98.143).

(2) Annual amount of each carbonate-based raw material charged to each continuous glass melting furnace (tons) (Equation N-1 of this subpart).

(3) Decimal fraction of calcination achieved for each carbonate-based raw material for each continuous glass melting furnace (specify the default value, if used, or the value determined according to § 98.144) (percentage, expressed as a decimal) (Equation N-1 of this subpart).

(d) You must keep a record of the file generated by the verification software specified in § 98.5(b) for the applicable data specified in paragraphs (d)(1) through (3) of this section. Retention of this file satisfies the recordkeeping requirement for the data in paragraphs (d)(1) through (3) of this section.

(1) Annual average decimal mass fraction of carbonate-based mineral in each carbonate-based raw material for each continuous glass melting furnace (specify the default value, if used, or the value determined according to § 98.144) (percentage, expressed as a decimal) (Equation N-1 of § 98.143).

(2) Annual amount of each carbonate-based raw material charged to each continuous glass melting furnace (tons) (Equation N-1 of this subpart).

(3) Decimal fraction of calcination achieved for each carbonate-based raw material for each continuous glass melting furnace (specify the default value, if used, or the value determined according to § 98.144) (percentage, expressed as a decimal) (Equation N-1 of this subpart).