§751.707. Workplace Chemical Protection Program (WCPP). — Inbound Citations

(C) The exposure control plan must be reviewed and updated as necessary, but at least every five years, to reflect any significant changes in the status of the owner or operator's approach to compliance with paragraphs (b) through (d) of this section.

(1) For each monitoring event, owners or operators subject to the ECEL described in § 751.707(b) must document and retain records of the following:

(i) Dates, duration, and results of each sample taken;

(ii) The quantity, location(s) and manner of use of carbon tetrachloride in use at the time of each monitoring event;

(iii) All measurements that may be necessary to determine the conditions that may affect the monitoring results;

(iv) Name, workplace address, work shift, job classification, work area, and type of respiratory protection (if any) by each monitored person;

(v) Identification of all potentially exposed persons that a monitored person is intended to represent if using a representative sample, consistent with § 751.707(b)(2)(i)(A) and (B);

(vi) Sampling and analytical methods used as described in § 751.707(b)(2)(i)(D);

(vii) Compliance with the Good Laboratory Practice Standards in 40 CFR part 792, or use of laboratory accredited by the AIHA or another industry-recognized program, as required by § 751.707(b)(2)(i)(C); and

(viii) type, maintenance, calibrations, performance tests, limits of detection, and any malfunctions;

(ix) Re-monitoring determinations conducted by an Environmental Professional as defined at 40 CFR 312.10 or a Certified Industrial Hygienist, if results indicated non-detect; and

(x) Notification of exposure monitoring results in accordance with § 751.707(b)(2)(v).

(v) Identification of all potentially exposed persons that a monitored person is intended to represent if using a representative sample, consistent with § 751.707(b)(2)(i)(A) and (B);

(v) Identification of all potentially exposed persons that a monitored person is intended to represent if using a representative sample, consistent with § 751.707(b)(2)(i)(A) and (B);

(vii) Compliance with the Good Laboratory Practice Standards in 40 CFR part 792, or use of laboratory accredited by the AIHA or another industry-recognized program, as required by § 751.707(b)(2)(i)(C); and

(vi) Sampling and analytical methods used as described in § 751.707(b)(2)(i)(D);

(x) Notification of exposure monitoring results in accordance with § 751.707(b)(2)(v).

(C) The exposure control plan must be reviewed and updated as necessary, but at least every five years, to reflect any significant changes in the status of the owner or operator's approach to compliance with paragraphs (b) through (d) of this section.

(3) Owners or operators subject to DDCC requirements described in § 751.707(c) must retain records of:

(i) Exposure control plan as described in § 751.707(d)(2);

(ii) Dermal protection used by each potentially exposed person and PPE program implementation as described in § 751.707(f)(3), including:

(A) The name, workplace address, work shift, job classification, and work area of each person reasonably likely to directly handle carbon tetrachloride or handle equipment or materials on which carbon tetrachloride may be present and the type of PPE selected to be worn by each of these persons;

(B) The basis for specific PPE selection (e.g., demonstration based on permeation testing or manufacturer specifications that each item of PPE selected provides an impervious barrier to prevent exposure during expected duration and conditions of exposure, including the likely combinations of chemical substances to which the PPE may be exposed in the work area);

(C) Appropriately sized PPE and training on proper application, wear, and removal of PPE, and proper care/disposal of PPE;

(D) Occurrence and duration of any direct dermal contact with carbon tetrachloride that occurs during any activity or malfunction at the workplace that causes direct dermal exposures to occur and/or glove breakthrough, and corrective actions to be taken during and immediately following that activity or malfunction to prevent direct dermal contact to carbon tetrachloride; and

(E) Training in accordance with § 751.707(f)(3).

(iii) Information and training provided as required in § 751.707(e).

(C) The exposure control plan must be reviewed and updated as necessary, but at least every five years, to reflect any significant changes in the status of the owner or operator's approach to compliance with paragraphs (b) through (d) of this section.

(i) Exposure control plan as described in § 751.707(d)(2);

(iv) Information and training as required in § 751.707(e).

(iii) Respiratory protection used by each potentially exposed person and PPE program implementation as described in § 751.707(f)(2) including:

(A) The name, workplace address, work shift, job classification, work area of each potentially exposed person, and the type of respiratory protection provided to each potentially exposed person;

(B) The basis for the specific respiratory protection selection in accordance with § 751.707(f)(2); and

(C) Fit testing and training in accordance with § 751.707(f)(2).

(3) After December 18, 2025 for Federal agencies and Federal contractors acting for or on behalf of the Federal government, or after June 16, 2025 for non-Federal owners and operators, owners or operators must ensure that all persons reasonably likely to be exposed from direct dermal contact to carbon tetrachloride when carbon tetrachloride is used as a laboratory chemical, except for the U.S. Department of Defense's industrial and commercial use of carbon tetrachloride as a laboratory chemical in chemical weapons destruction, are provided with dermal PPE and training on proper use of PPE in a manner consistent with § 751.707(f)(3).

(ii) Dermal protection used by each potentially exposed person and PPE program implementation as described in § 751.707(f)(3), including:

(A) The name, workplace address, work shift, job classification, and work area of each person reasonably likely to directly handle carbon tetrachloride or handle equipment or materials on which carbon tetrachloride may be present and the type of PPE selected to be worn by each of these persons;

(B) The basis for specific PPE selection (e.g., demonstration based on permeation testing or manufacturer specifications that each item of PPE selected provides an impervious barrier to prevent exposure during expected duration and conditions of exposure, including the likely combinations of chemical substances to which the PPE may be exposed in the work area);

(C) Appropriately sized PPE and training on proper application, wear, and removal of PPE, and proper care/disposal of PPE;

(D) Occurrence and duration of any direct dermal contact with carbon tetrachloride that occurs during any activity or malfunction at the workplace that causes direct dermal exposures to occur and/or glove breakthrough, and corrective actions to be taken during and immediately following that activity or malfunction to prevent direct dermal contact to carbon tetrachloride; and

(E) Training in accordance with § 751.707(f)(3).