§700.45. Fee payments. — Inbound Citations

(c) After October 18, 2018, all persons specified in § 700.45 and paragraph (a) of this section must comply with this subpart.

(ii) Fees to be collected or refunded shall be determined pursuant to paragraph (k) of this section and 40 CFR 700.45; or

(f) When applying for a test marketing exemption, persons are subject to fees in accordance with 40 CFR 700.45.

(b) The Agency considers failure to comply with any aspect of a consent agreement, including the failure to pay requisite fees as specified in § 700.45 of this chapter, to be a “prohibited act” under section 15 of TSCA, subject to all the provisions of the Act applicable to violations of section 15. Section 15(1) of TSCA makes it unlawful for any person to fail or refuse to comply with any rule or order issued under section 4. Consent agreements adopted pursuant to this part are “orders issued under section 4” for purposes of section 15(1) of TSCA.

(2) Manufacturers and processors of chemical substances and mixtures required to submit information for these chemical substances and mixtures under a TSCA section 4(a) test order or enforceable consent agreement, or manufacturers of chemical substances and mixtures required to submit information for these chemical substance and mixtures under a TSCA section 4(a) test rule, shall remit for each such test rule, order, or enforceable consent agreement the applicable fee identified in paragraph (c) of this section in accordance with the procedures in paragraphs (f) and (g) of this section. Manufacturers of a chemical substance subject to a test rule under TSCA section 4(a) are exempted from fee payment requirements in this section, if they meet one or more of the exemptions under this paragraphs (a)(2)(i) through (v) of this section on or after the certification cutoff date identified in paragraph (b)(6) of this section and do not conduct manufacturing outside of those exemptions after the certification cutoff dates or if they meet the exemptions under paragraph (a)(2)(vi) of this section for the five-year period preceding publication of the preliminary list and do not conduct manufacturing outside of that exemption during the five-year period preceding publication of the preliminary list; and the exemptions are only available if the manufacturer will meet one or more of the exemptions in this paragraph (a)(2)(i) through (vi) in the successive five years; and will not conduct manufacturing outside of the exemptions in paragraphs (a)(2)(i) through (v) of this section in the successive five years or will meet the exemption in paragraph (a)(2)(vi) of this section in the successive five years:

(i) Import articles containing that chemical substance;

(ii) Produce that chemical substance as a byproduct that is not later used for commercial purposes or distributed for commercial use;

(iii) Manufacture that chemical substance as an impurity as defined in 40 CFR 704.3;

(iv) Manufacture that chemical substance as a non-isolated intermediate as defined in 40 CFR 704.3;

(v) Manufacture small quantities of that chemical substance solely for research and development, as defined in 40 CFR 700.43; or

(vi) Manufacture that chemical substance in quantities below a 1,100 lbs annual production volume as described in § 700.43, unless all manufacturers of that chemical substance manufacture that chemical in quantities below a 1,100 lbs annual production volume as defined in § 700.43, in which case this exemption is not applicable.

(2) Manufacturers and processors of chemical substances and mixtures required to submit information for these chemical substances and mixtures under a TSCA section 4(a) test order or enforceable consent agreement, or manufacturers of chemical substances and mixtures required to submit information for these chemical substance and mixtures under a TSCA section 4(a) test rule, shall remit for each such test rule, order, or enforceable consent agreement the applicable fee identified in paragraph (c) of this section in accordance with the procedures in paragraphs (f) and (g) of this section. Manufacturers of a chemical substance subject to a test rule under TSCA section 4(a) are exempted from fee payment requirements in this section, if they meet one or more of the exemptions under this paragraphs (a)(2)(i) through (v) of this section on or after the certification cutoff date identified in paragraph (b)(6) of this section and do not conduct manufacturing outside of those exemptions after the certification cutoff dates or if they meet the exemptions under paragraph (a)(2)(vi) of this section for the five-year period preceding publication of the preliminary list and do not conduct manufacturing outside of that exemption during the five-year period preceding publication of the preliminary list; and the exemptions are only available if the manufacturer will meet one or more of the exemptions in this paragraph (a)(2)(i) through (vi) in the successive five years; and will not conduct manufacturing outside of the exemptions in paragraphs (a)(2)(i) through (v) of this section in the successive five years or will meet the exemption in paragraph (a)(2)(vi) of this section in the successive five years:

(i) Import articles containing that chemical substance;

(ii) Produce that chemical substance as a byproduct that is not later used for commercial purposes or distributed for commercial use;

(iii) Manufacture that chemical substance as an impurity as defined in 40 CFR 704.3;

(iv) Manufacture that chemical substance as a non-isolated intermediate as defined in 40 CFR 704.3;

(v) Manufacture small quantities of that chemical substance solely for research and development, as defined in 40 CFR 700.43; or

(vi) Manufacture that chemical substance in quantities below a 1,100 lbs annual production volume as described in § 700.43, unless all manufacturers of that chemical substance manufacture that chemical in quantities below a 1,100 lbs annual production volume as defined in § 700.43, in which case this exemption is not applicable.

(2) Manufacturers and processors of chemical substances and mixtures required to submit information for these chemical substances and mixtures under a TSCA section 4(a) test order or enforceable consent agreement, or manufacturers of chemical substances and mixtures required to submit information for these chemical substance and mixtures under a TSCA section 4(a) test rule, shall remit for each such test rule, order, or enforceable consent agreement the applicable fee identified in paragraph (c) of this section in accordance with the procedures in paragraphs (f) and (g) of this section. Manufacturers of a chemical substance subject to a test rule under TSCA section 4(a) are exempted from fee payment requirements in this section, if they meet one or more of the exemptions under this paragraphs (a)(2)(i) through (v) of this section on or after the certification cutoff date identified in paragraph (b)(6) of this section and do not conduct manufacturing outside of those exemptions after the certification cutoff dates or if they meet the exemptions under paragraph (a)(2)(vi) of this section for the five-year period preceding publication of the preliminary list and do not conduct manufacturing outside of that exemption during the five-year period preceding publication of the preliminary list; and the exemptions are only available if the manufacturer will meet one or more of the exemptions in this paragraph (a)(2)(i) through (vi) in the successive five years; and will not conduct manufacturing outside of the exemptions in paragraphs (a)(2)(i) through (v) of this section in the successive five years or will meet the exemption in paragraph (a)(2)(vi) of this section in the successive five years:

(i) Import articles containing that chemical substance;

(ii) Produce that chemical substance as a byproduct that is not later used for commercial purposes or distributed for commercial use;

(iii) Manufacture that chemical substance as an impurity as defined in 40 CFR 704.3;

(iv) Manufacture that chemical substance as a non-isolated intermediate as defined in 40 CFR 704.3;

(v) Manufacture small quantities of that chemical substance solely for research and development, as defined in 40 CFR 700.43; or

(vi) Manufacture that chemical substance in quantities below a 1,100 lbs annual production volume as described in § 700.43, unless all manufacturers of that chemical substance manufacture that chemical in quantities below a 1,100 lbs annual production volume as defined in § 700.43, in which case this exemption is not applicable.

(2) Manufacturers and processors of chemical substances and mixtures required to submit information for these chemical substances and mixtures under a TSCA section 4(a) test order or enforceable consent agreement, or manufacturers of chemical substances and mixtures required to submit information for these chemical substance and mixtures under a TSCA section 4(a) test rule, shall remit for each such test rule, order, or enforceable consent agreement the applicable fee identified in paragraph (c) of this section in accordance with the procedures in paragraphs (f) and (g) of this section. Manufacturers of a chemical substance subject to a test rule under TSCA section 4(a) are exempted from fee payment requirements in this section, if they meet one or more of the exemptions under this paragraphs (a)(2)(i) through (v) of this section on or after the certification cutoff date identified in paragraph (b)(6) of this section and do not conduct manufacturing outside of those exemptions after the certification cutoff dates or if they meet the exemptions under paragraph (a)(2)(vi) of this section for the five-year period preceding publication of the preliminary list and do not conduct manufacturing outside of that exemption during the five-year period preceding publication of the preliminary list; and the exemptions are only available if the manufacturer will meet one or more of the exemptions in this paragraph (a)(2)(i) through (vi) in the successive five years; and will not conduct manufacturing outside of the exemptions in paragraphs (a)(2)(i) through (v) of this section in the successive five years or will meet the exemption in paragraph (a)(2)(vi) of this section in the successive five years:

(i) Import articles containing that chemical substance;

(ii) Produce that chemical substance as a byproduct that is not later used for commercial purposes or distributed for commercial use;

(iii) Manufacture that chemical substance as an impurity as defined in 40 CFR 704.3;

(iv) Manufacture that chemical substance as a non-isolated intermediate as defined in 40 CFR 704.3;

(v) Manufacture small quantities of that chemical substance solely for research and development, as defined in 40 CFR 700.43; or

(vi) Manufacture that chemical substance in quantities below a 1,100 lbs annual production volume as described in § 700.43, unless all manufacturers of that chemical substance manufacture that chemical in quantities below a 1,100 lbs annual production volume as defined in § 700.43, in which case this exemption is not applicable.

(2) Manufacturers and processors of chemical substances and mixtures required to submit information for these chemical substances and mixtures under a TSCA section 4(a) test order or enforceable consent agreement, or manufacturers of chemical substances and mixtures required to submit information for these chemical substance and mixtures under a TSCA section 4(a) test rule, shall remit for each such test rule, order, or enforceable consent agreement the applicable fee identified in paragraph (c) of this section in accordance with the procedures in paragraphs (f) and (g) of this section. Manufacturers of a chemical substance subject to a test rule under TSCA section 4(a) are exempted from fee payment requirements in this section, if they meet one or more of the exemptions under this paragraphs (a)(2)(i) through (v) of this section on or after the certification cutoff date identified in paragraph (b)(6) of this section and do not conduct manufacturing outside of those exemptions after the certification cutoff dates or if they meet the exemptions under paragraph (a)(2)(vi) of this section for the five-year period preceding publication of the preliminary list and do not conduct manufacturing outside of that exemption during the five-year period preceding publication of the preliminary list; and the exemptions are only available if the manufacturer will meet one or more of the exemptions in this paragraph (a)(2)(i) through (vi) in the successive five years; and will not conduct manufacturing outside of the exemptions in paragraphs (a)(2)(i) through (v) of this section in the successive five years or will meet the exemption in paragraph (a)(2)(vi) of this section in the successive five years:

(i) Import articles containing that chemical substance;

(ii) Produce that chemical substance as a byproduct that is not later used for commercial purposes or distributed for commercial use;

(iii) Manufacture that chemical substance as an impurity as defined in 40 CFR 704.3;

(iv) Manufacture that chemical substance as a non-isolated intermediate as defined in 40 CFR 704.3;

(v) Manufacture small quantities of that chemical substance solely for research and development, as defined in 40 CFR 700.43; or

(vi) Manufacture that chemical substance in quantities below a 1,100 lbs annual production volume as described in § 700.43, unless all manufacturers of that chemical substance manufacture that chemical in quantities below a 1,100 lbs annual production volume as defined in § 700.43, in which case this exemption is not applicable.

(2) Manufacturers and processors of chemical substances and mixtures required to submit information for these chemical substances and mixtures under a TSCA section 4(a) test order or enforceable consent agreement, or manufacturers of chemical substances and mixtures required to submit information for these chemical substance and mixtures under a TSCA section 4(a) test rule, shall remit for each such test rule, order, or enforceable consent agreement the applicable fee identified in paragraph (c) of this section in accordance with the procedures in paragraphs (f) and (g) of this section. Manufacturers of a chemical substance subject to a test rule under TSCA section 4(a) are exempted from fee payment requirements in this section, if they meet one or more of the exemptions under this paragraphs (a)(2)(i) through (v) of this section on or after the certification cutoff date identified in paragraph (b)(6) of this section and do not conduct manufacturing outside of those exemptions after the certification cutoff dates or if they meet the exemptions under paragraph (a)(2)(vi) of this section for the five-year period preceding publication of the preliminary list and do not conduct manufacturing outside of that exemption during the five-year period preceding publication of the preliminary list; and the exemptions are only available if the manufacturer will meet one or more of the exemptions in this paragraph (a)(2)(i) through (vi) in the successive five years; and will not conduct manufacturing outside of the exemptions in paragraphs (a)(2)(i) through (v) of this section in the successive five years or will meet the exemption in paragraph (a)(2)(vi) of this section in the successive five years:

(i) Import articles containing that chemical substance;

(ii) Produce that chemical substance as a byproduct that is not later used for commercial purposes or distributed for commercial use;

(iii) Manufacture that chemical substance as an impurity as defined in 40 CFR 704.3;

(iv) Manufacture that chemical substance as a non-isolated intermediate as defined in 40 CFR 704.3;

(v) Manufacture small quantities of that chemical substance solely for research and development, as defined in 40 CFR 700.43; or

(vi) Manufacture that chemical substance in quantities below a 1,100 lbs annual production volume as described in § 700.43, unless all manufacturers of that chemical substance manufacture that chemical in quantities below a 1,100 lbs annual production volume as defined in § 700.43, in which case this exemption is not applicable.

(3) Manufacturers of a chemical substance that is subject to a risk evaluation under section 6(b) of the Act, shall remit for each such chemical risk evaluation the applicable fee identified in paragraph (c) of this section in accordance with the procedures in paragraphs (f) and (g) of this section. Manufacturers of a chemical substance subject to risk evaluation under section 6(b) of the Act are exempted from fee payment requirements in this section, if they meet one or more of the exemptions under paragraphs (a)(3)(i) through (v) of this section on or after the certification cutoff date identified in paragraph (b)(6)(i) of this section and do not conduct manufacturing outside of those exemptions after the certification cutoff dates or if they meet the exemptions under paragraph (a)(3)(vi) of this section for the five-year period preceding publication of the preliminary list and do not conduct manufacturing outside of that exemption during the five-year period preceding publication of the preliminary list; and the exemptions are only available if the manufacturer will meet one or more of the exemptions in paragraphs (a)(3)(i) through (vi) of this section in the successive five years and will not conduct manufacturing outside of the exemptions in paragraphs (a)(3)(i) through (v) of this section in the successive five years or will meet the exemption in paragraph (a)(3)(vi) of this section in the successive five years:

(i) Import articles containing that chemical substance;

(ii) Produce that chemical substance as a byproduct that is not later used for commercial purposes or distributed for commercial use;

(iii) Manufacture that chemical substance as an impurity as defined in 40 CFR 704.3;

(iv) Manufacture that chemical substance as a non-isolated intermediate as defined in 40 CFR 704.3;

(v) Manufacture small quantities of that chemical substance solely for research and development, as defined in § 700.43; or

(vi) manufacture that chemical substance in quantities below a 2,500 lbs annual production volume as described in § 700.43, unless all manufacturers of that chemical substance manufacture that chemical in quantities below a 2,500 lbs annual production volume as defined in § 700.43, in which case this exemption is not applicable.

(3) Manufacturers of a chemical substance that is subject to a risk evaluation under section 6(b) of the Act, shall remit for each such chemical risk evaluation the applicable fee identified in paragraph (c) of this section in accordance with the procedures in paragraphs (f) and (g) of this section. Manufacturers of a chemical substance subject to risk evaluation under section 6(b) of the Act are exempted from fee payment requirements in this section, if they meet one or more of the exemptions under paragraphs (a)(3)(i) through (v) of this section on or after the certification cutoff date identified in paragraph (b)(6)(i) of this section and do not conduct manufacturing outside of those exemptions after the certification cutoff dates or if they meet the exemptions under paragraph (a)(3)(vi) of this section for the five-year period preceding publication of the preliminary list and do not conduct manufacturing outside of that exemption during the five-year period preceding publication of the preliminary list; and the exemptions are only available if the manufacturer will meet one or more of the exemptions in paragraphs (a)(3)(i) through (vi) of this section in the successive five years and will not conduct manufacturing outside of the exemptions in paragraphs (a)(3)(i) through (v) of this section in the successive five years or will meet the exemption in paragraph (a)(3)(vi) of this section in the successive five years:

(i) Import articles containing that chemical substance;

(ii) Produce that chemical substance as a byproduct that is not later used for commercial purposes or distributed for commercial use;

(iii) Manufacture that chemical substance as an impurity as defined in 40 CFR 704.3;

(iv) Manufacture that chemical substance as a non-isolated intermediate as defined in 40 CFR 704.3;

(v) Manufacture small quantities of that chemical substance solely for research and development, as defined in § 700.43; or

(vi) manufacture that chemical substance in quantities below a 2,500 lbs annual production volume as described in § 700.43, unless all manufacturers of that chemical substance manufacture that chemical in quantities below a 2,500 lbs annual production volume as defined in § 700.43, in which case this exemption is not applicable.

(3) Manufacturers of a chemical substance that is subject to a risk evaluation under section 6(b) of the Act, shall remit for each such chemical risk evaluation the applicable fee identified in paragraph (c) of this section in accordance with the procedures in paragraphs (f) and (g) of this section. Manufacturers of a chemical substance subject to risk evaluation under section 6(b) of the Act are exempted from fee payment requirements in this section, if they meet one or more of the exemptions under paragraphs (a)(3)(i) through (v) of this section on or after the certification cutoff date identified in paragraph (b)(6)(i) of this section and do not conduct manufacturing outside of those exemptions after the certification cutoff dates or if they meet the exemptions under paragraph (a)(3)(vi) of this section for the five-year period preceding publication of the preliminary list and do not conduct manufacturing outside of that exemption during the five-year period preceding publication of the preliminary list; and the exemptions are only available if the manufacturer will meet one or more of the exemptions in paragraphs (a)(3)(i) through (vi) of this section in the successive five years and will not conduct manufacturing outside of the exemptions in paragraphs (a)(3)(i) through (v) of this section in the successive five years or will meet the exemption in paragraph (a)(3)(vi) of this section in the successive five years:

(i) Import articles containing that chemical substance;

(ii) Produce that chemical substance as a byproduct that is not later used for commercial purposes or distributed for commercial use;

(iii) Manufacture that chemical substance as an impurity as defined in 40 CFR 704.3;

(iv) Manufacture that chemical substance as a non-isolated intermediate as defined in 40 CFR 704.3;

(v) Manufacture small quantities of that chemical substance solely for research and development, as defined in § 700.43; or

(vi) manufacture that chemical substance in quantities below a 2,500 lbs annual production volume as described in § 700.43, unless all manufacturers of that chemical substance manufacture that chemical in quantities below a 2,500 lbs annual production volume as defined in § 700.43, in which case this exemption is not applicable.

(3) Manufacturers of a chemical substance that is subject to a risk evaluation under section 6(b) of the Act, shall remit for each such chemical risk evaluation the applicable fee identified in paragraph (c) of this section in accordance with the procedures in paragraphs (f) and (g) of this section. Manufacturers of a chemical substance subject to risk evaluation under section 6(b) of the Act are exempted from fee payment requirements in this section, if they meet one or more of the exemptions under paragraphs (a)(3)(i) through (v) of this section on or after the certification cutoff date identified in paragraph (b)(6)(i) of this section and do not conduct manufacturing outside of those exemptions after the certification cutoff dates or if they meet the exemptions under paragraph (a)(3)(vi) of this section for the five-year period preceding publication of the preliminary list and do not conduct manufacturing outside of that exemption during the five-year period preceding publication of the preliminary list; and the exemptions are only available if the manufacturer will meet one or more of the exemptions in paragraphs (a)(3)(i) through (vi) of this section in the successive five years and will not conduct manufacturing outside of the exemptions in paragraphs (a)(3)(i) through (v) of this section in the successive five years or will meet the exemption in paragraph (a)(3)(vi) of this section in the successive five years:

(i) Import articles containing that chemical substance;

(ii) Produce that chemical substance as a byproduct that is not later used for commercial purposes or distributed for commercial use;

(iii) Manufacture that chemical substance as an impurity as defined in 40 CFR 704.3;

(iv) Manufacture that chemical substance as a non-isolated intermediate as defined in 40 CFR 704.3;

(v) Manufacture small quantities of that chemical substance solely for research and development, as defined in § 700.43; or

(vi) manufacture that chemical substance in quantities below a 2,500 lbs annual production volume as described in § 700.43, unless all manufacturers of that chemical substance manufacture that chemical in quantities below a 2,500 lbs annual production volume as defined in § 700.43, in which case this exemption is not applicable.

(3) Manufacturers of a chemical substance that is subject to a risk evaluation under section 6(b) of the Act, shall remit for each such chemical risk evaluation the applicable fee identified in paragraph (c) of this section in accordance with the procedures in paragraphs (f) and (g) of this section. Manufacturers of a chemical substance subject to risk evaluation under section 6(b) of the Act are exempted from fee payment requirements in this section, if they meet one or more of the exemptions under paragraphs (a)(3)(i) through (v) of this section on or after the certification cutoff date identified in paragraph (b)(6)(i) of this section and do not conduct manufacturing outside of those exemptions after the certification cutoff dates or if they meet the exemptions under paragraph (a)(3)(vi) of this section for the five-year period preceding publication of the preliminary list and do not conduct manufacturing outside of that exemption during the five-year period preceding publication of the preliminary list; and the exemptions are only available if the manufacturer will meet one or more of the exemptions in paragraphs (a)(3)(i) through (vi) of this section in the successive five years and will not conduct manufacturing outside of the exemptions in paragraphs (a)(3)(i) through (v) of this section in the successive five years or will meet the exemption in paragraph (a)(3)(vi) of this section in the successive five years:

(i) Import articles containing that chemical substance;

(ii) Produce that chemical substance as a byproduct that is not later used for commercial purposes or distributed for commercial use;

(iii) Manufacture that chemical substance as an impurity as defined in 40 CFR 704.3;

(iv) Manufacture that chemical substance as a non-isolated intermediate as defined in 40 CFR 704.3;

(v) Manufacture small quantities of that chemical substance solely for research and development, as defined in § 700.43; or

(vi) manufacture that chemical substance in quantities below a 2,500 lbs annual production volume as described in § 700.43, unless all manufacturers of that chemical substance manufacture that chemical in quantities below a 2,500 lbs annual production volume as defined in § 700.43, in which case this exemption is not applicable.

(3) Manufacturers of a chemical substance that is subject to a risk evaluation under section 6(b) of the Act, shall remit for each such chemical risk evaluation the applicable fee identified in paragraph (c) of this section in accordance with the procedures in paragraphs (f) and (g) of this section. Manufacturers of a chemical substance subject to risk evaluation under section 6(b) of the Act are exempted from fee payment requirements in this section, if they meet one or more of the exemptions under paragraphs (a)(3)(i) through (v) of this section on or after the certification cutoff date identified in paragraph (b)(6)(i) of this section and do not conduct manufacturing outside of those exemptions after the certification cutoff dates or if they meet the exemptions under paragraph (a)(3)(vi) of this section for the five-year period preceding publication of the preliminary list and do not conduct manufacturing outside of that exemption during the five-year period preceding publication of the preliminary list; and the exemptions are only available if the manufacturer will meet one or more of the exemptions in paragraphs (a)(3)(i) through (vi) of this section in the successive five years and will not conduct manufacturing outside of the exemptions in paragraphs (a)(3)(i) through (v) of this section in the successive five years or will meet the exemption in paragraph (a)(3)(vi) of this section in the successive five years:

(i) Import articles containing that chemical substance;

(ii) Produce that chemical substance as a byproduct that is not later used for commercial purposes or distributed for commercial use;

(iii) Manufacture that chemical substance as an impurity as defined in 40 CFR 704.3;

(iv) Manufacture that chemical substance as a non-isolated intermediate as defined in 40 CFR 704.3;

(v) Manufacture small quantities of that chemical substance solely for research and development, as defined in § 700.43; or

(vi) manufacture that chemical substance in quantities below a 2,500 lbs annual production volume as described in § 700.43, unless all manufacturers of that chemical substance manufacture that chemical in quantities below a 2,500 lbs annual production volume as defined in § 700.43, in which case this exemption is not applicable.

(9) For Section 4 Test Orders and enforceable consent agreements, and Section 6 Manufacturer-Requested Risk Evaluations, EPA will not conduct the identification process described in paragraphs (b)(1) through (8) of this section, as manufacturers self-identify through a submission or are already otherwise known to Agency. However, those manufacturers are required to provide an information submission to EPA for the purposes of fee administration. The notice must be submitted electronically via the Agency's electronic reporting software (e.g., Central Data Exchange (CDX)) and must contain the manufacturers: Full name, address, telephone number and email address. Timing of this submission must be as follows:

(i) For section 4 test orders and enforceable consent agreements, the informational submission in this paragraph (b)(9) must be provided within 30 days following notification from EPA.

(ii) For section 6 manufacturer-requested risk evaluations, the informational submission in this paragraph (b)(9) is required as part of the procedural process for making such requests, and must be completed at the time of making the request.

(9) For Section 4 Test Orders and enforceable consent agreements, and Section 6 Manufacturer-Requested Risk Evaluations, EPA will not conduct the identification process described in paragraphs (b)(1) through (8) of this section, as manufacturers self-identify through a submission or are already otherwise known to Agency. However, those manufacturers are required to provide an information submission to EPA for the purposes of fee administration. The notice must be submitted electronically via the Agency's electronic reporting software (e.g., Central Data Exchange (CDX)) and must contain the manufacturers: Full name, address, telephone number and email address. Timing of this submission must be as follows:

(i) For section 4 test orders and enforceable consent agreements, the informational submission in this paragraph (b)(9) must be provided within 30 days following notification from EPA.

(ii) For section 6 manufacturer-requested risk evaluations, the informational submission in this paragraph (b)(9) is required as part of the procedural process for making such requests, and must be completed at the time of making the request.

(9) For Section 4 Test Orders and enforceable consent agreements, and Section 6 Manufacturer-Requested Risk Evaluations, EPA will not conduct the identification process described in paragraphs (b)(1) through (8) of this section, as manufacturers self-identify through a submission or are already otherwise known to Agency. However, those manufacturers are required to provide an information submission to EPA for the purposes of fee administration. The notice must be submitted electronically via the Agency's electronic reporting software (e.g., Central Data Exchange (CDX)) and must contain the manufacturers: Full name, address, telephone number and email address. Timing of this submission must be as follows:

(i) For section 4 test orders and enforceable consent agreements, the informational submission in this paragraph (b)(9) must be provided within 30 days following notification from EPA.

(ii) For section 6 manufacturer-requested risk evaluations, the informational submission in this paragraph (b)(9) is required as part of the procedural process for making such requests, and must be completed at the time of making the request.

(9) For Section 4 Test Orders and enforceable consent agreements, and Section 6 Manufacturer-Requested Risk Evaluations, EPA will not conduct the identification process described in paragraphs (b)(1) through (8) of this section, as manufacturers self-identify through a submission or are already otherwise known to Agency. However, those manufacturers are required to provide an information submission to EPA for the purposes of fee administration. The notice must be submitted electronically via the Agency's electronic reporting software (e.g., Central Data Exchange (CDX)) and must contain the manufacturers: Full name, address, telephone number and email address. Timing of this submission must be as follows:

(i) For section 4 test orders and enforceable consent agreements, the informational submission in this paragraph (b)(9) must be provided within 30 days following notification from EPA.

(ii) For section 6 manufacturer-requested risk evaluations, the informational submission in this paragraph (b)(9) is required as part of the procedural process for making such requests, and must be completed at the time of making the request.

(9) For Section 4 Test Orders and enforceable consent agreements, and Section 6 Manufacturer-Requested Risk Evaluations, EPA will not conduct the identification process described in paragraphs (b)(1) through (8) of this section, as manufacturers self-identify through a submission or are already otherwise known to Agency. However, those manufacturers are required to provide an information submission to EPA for the purposes of fee administration. The notice must be submitted electronically via the Agency's electronic reporting software (e.g., Central Data Exchange (CDX)) and must contain the manufacturers: Full name, address, telephone number and email address. Timing of this submission must be as follows:

(i) For section 4 test orders and enforceable consent agreements, the informational submission in this paragraph (b)(9) must be provided within 30 days following notification from EPA.

(ii) For section 6 manufacturer-requested risk evaluations, the informational submission in this paragraph (b)(9) is required as part of the procedural process for making such requests, and must be completed at the time of making the request.

(9) For Section 4 Test Orders and enforceable consent agreements, and Section 6 Manufacturer-Requested Risk Evaluations, EPA will not conduct the identification process described in paragraphs (b)(1) through (8) of this section, as manufacturers self-identify through a submission or are already otherwise known to Agency. However, those manufacturers are required to provide an information submission to EPA for the purposes of fee administration. The notice must be submitted electronically via the Agency's electronic reporting software (e.g., Central Data Exchange (CDX)) and must contain the manufacturers: Full name, address, telephone number and email address. Timing of this submission must be as follows:

(i) For section 4 test orders and enforceable consent agreements, the informational submission in this paragraph (b)(9) must be provided within 30 days following notification from EPA.

(ii) For section 6 manufacturer-requested risk evaluations, the informational submission in this paragraph (b)(9) is required as part of the procedural process for making such requests, and must be completed at the time of making the request.

(9) For Section 4 Test Orders and enforceable consent agreements, and Section 6 Manufacturer-Requested Risk Evaluations, EPA will not conduct the identification process described in paragraphs (b)(1) through (8) of this section, as manufacturers self-identify through a submission or are already otherwise known to Agency. However, those manufacturers are required to provide an information submission to EPA for the purposes of fee administration. The notice must be submitted electronically via the Agency's electronic reporting software (e.g., Central Data Exchange (CDX)) and must contain the manufacturers: Full name, address, telephone number and email address. Timing of this submission must be as follows:

(i) For section 4 test orders and enforceable consent agreements, the informational submission in this paragraph (b)(9) must be provided within 30 days following notification from EPA.

(ii) For section 6 manufacturer-requested risk evaluations, the informational submission in this paragraph (b)(9) is required as part of the procedural process for making such requests, and must be completed at the time of making the request.

(9) For Section 4 Test Orders and enforceable consent agreements, and Section 6 Manufacturer-Requested Risk Evaluations, EPA will not conduct the identification process described in paragraphs (b)(1) through (8) of this section, as manufacturers self-identify through a submission or are already otherwise known to Agency. However, those manufacturers are required to provide an information submission to EPA for the purposes of fee administration. The notice must be submitted electronically via the Agency's electronic reporting software (e.g., Central Data Exchange (CDX)) and must contain the manufacturers: Full name, address, telephone number and email address. Timing of this submission must be as follows:

(i) For section 4 test orders and enforceable consent agreements, the informational submission in this paragraph (b)(9) must be provided within 30 days following notification from EPA.

(ii) For section 6 manufacturer-requested risk evaluations, the informational submission in this paragraph (b)(9) is required as part of the procedural process for making such requests, and must be completed at the time of making the request.

(ii) Each person's share of the applicable fees triggered by section 6(b) of the Act specified in paragraph (c) of this section shall be in proportion to the total number of manufacturers and their reported production volume as described in § 700.45(b)(v) of the chemical substance, with lower fees for small businesses:

(i) Each person who remits the fee identified in paragraph (c)(1) of this section for a PMN, consolidated PMN, or SNUN shall insert a check mark for the statement, “The company named in part 1, section A is a small business concern under 40 CFR 700.43 and has remitted a fee of $6,480 in accordance with 40 CFR 700.45(c).” under “CERTIFICATION” on page 2 of the Premanufacture Notice for New Chemical Substances (EPA Form 7710-25).

(a) EPA will not consider a TSCA section 5 notice to be complete unless the appropriate certification under § 700.45(g) is included and until the appropriate remittance under § 700.45(c) has been submitted as provided in § 700.45(g). EPA will notify the submitter of a section 5 notice that it is incomplete in accordance with §§ 720.65(c) and 725.33(b)(1) of this chapter.

(iv) Remit the applicable fee specified in § 700.45(c) of this chapter.

(i) Persons submitting MCANs and exemption requests to EPA under this part are subject to the applicable fees and conditions specified in §§ 700.40, 700.45(c), and 700.49 of this chapter.

(9) The submitter does not remit the fees required by § 700.45(c) of this chapter.

(g) Manufacturers and processors subject to a test rule described in § 790.40 and required to comply with the requirements of that test rule as provided in § 790.42(a) must remit the applicable fee specified in § 700.45(c) of this chapter.

(c) Persons who fail to pay the requisite fee as specified in § 700.45(c) of this chapter will be in violation of the rule.

(d) Manufacturers and/or processors signing the consent agreement are subject to the applicable fee specified in § 700.45(c) of this chapter.

(k) Manufacturers must pay fees to support risk evaluations as specified under 15 U.S.C. 2605(b)(4)(E)(ii), and in accordance with 15 U.S.C. 2625(b) and 40 CFR 700.45. In the event that a request for a risk evaluation is withdrawn by the requesting manufacturer pursuant to paragraph (g) of this section, the total fee amount due will be either, in accordance with 40 CFR 700.45(c)(2)(x) or (xi) (as adjusted by 40 CFR 700.45(d) when applicable), 50% or 100% of the actual costs expended in carrying out the risk evaluation as of the date of receipt of the withdrawal notice. The payment amount will be determined by EPA, and invoice or refund issued to the requesting manufacturer as appropriate.

(k) Manufacturers must pay fees to support risk evaluations as specified under 15 U.S.C. 2605(b)(4)(E)(ii), and in accordance with 15 U.S.C. 2625(b) and 40 CFR 700.45. In the event that a request for a risk evaluation is withdrawn by the requesting manufacturer pursuant to paragraph (g) of this section, the total fee amount due will be either, in accordance with 40 CFR 700.45(c)(2)(x) or (xi) (as adjusted by 40 CFR 700.45(d) when applicable), 50% or 100% of the actual costs expended in carrying out the risk evaluation as of the date of receipt of the withdrawal notice. The payment amount will be determined by EPA, and invoice or refund issued to the requesting manufacturer as appropriate.

(k) Manufacturers must pay fees to support risk evaluations as specified under 15 U.S.C. 2605(b)(4)(E)(ii), and in accordance with 15 U.S.C. 2625(b) and 40 CFR 700.45. In the event that a request for a risk evaluation is withdrawn by the requesting manufacturer pursuant to paragraph (g) of this section, the total fee amount due will be either, in accordance with 40 CFR 700.45(c)(2)(x) or (xi) (as adjusted by 40 CFR 700.45(d) when applicable), 50% or 100% of the actual costs expended in carrying out the risk evaluation as of the date of receipt of the withdrawal notice. The payment amount will be determined by EPA, and invoice or refund issued to the requesting manufacturer as appropriate.

(x) The submitter does not include an identifying number and a payment identity number as required by § 700.45(e)(3).

(v) If a manufacturer has not submitted certification of cessation, as described in paragraph (b)(5)(ii) of this section, or certification of no manufacture, as described in paragraph (b)(5)(iii) of this section, for purposes of identifying manufacturers subject to fees for TSCA section 6 EPA-initiated risk evaluations and does not meet one or more of the exemptions in paragraph (a)(3)(i) through (v) of this section, the manufacturer must submit their production volume as defined in 40 CFR 700.43 for the applicable substance for the three calendar years prior to publication of the preliminary list. Only production volume reported to EPA prior to the final list being published will be used in determining fees described in § 700.45(f).

(a) EPA will not consider a TSCA section 5 notice to be complete unless the appropriate certification under § 700.45(g) is included and until the appropriate remittance under § 700.45(c) has been submitted as provided in § 700.45(g). EPA will notify the submitter of a section 5 notice that it is incomplete in accordance with §§ 720.65(c) and 725.33(b)(1) of this chapter.

(6) A fee payment identity number, as required in 40 CFR 700.45(g)(4).

(7) A payment identity number on the front page of the letter, as required in § 700.45(g)(4) of this chapter.

(18) Payment identity number, as required in § 700.45(g)(4) of this chapter.

(k) Manufacturers must pay fees to support risk evaluations as specified under 15 U.S.C. 2605(b)(4)(E)(ii), and in accordance with 15 U.S.C. 2625(b) and 40 CFR 700.45. In the event that a request for a risk evaluation is withdrawn by the requesting manufacturer pursuant to paragraph (g) of this section, the total fee amount due will be either, in accordance with 40 CFR 700.45(c)(2)(x) or (xi) (as adjusted by 40 CFR 700.45(d) when applicable), 50% or 100% of the actual costs expended in carrying out the risk evaluation as of the date of receipt of the withdrawal notice. The payment amount will be determined by EPA, and invoice or refund issued to the requesting manufacturer as appropriate.