§65.82. Design requirements.
40 C.F.R. § 65.82
The owner or operator shall equip each transfer rack with either one of the following equipment:
A closed vent system which routes the regulated material vapors to a control device as provided in § 65.83(a)(1) and (2).
Process piping which routes the regulated material vapors to a process or a fuel gas system as provided in § 65.83(a)(4), or to a vapor balance system as provided in § 65.83(a)(3).
Each closed vent system shall be designed to collect the regulated material displaced from tank trucks or railcars during loading and to route the collected regulated material to a control device as provided in § 65.83(a)(1) and (2).
Process piping shall be designed to collect the regulated material displaced from tank trucks or railcars during loading and to route the collected regulated material vapors to a process or a fuel gas system as provided in § 65.83(a)(4), or to a vapor balance system as provided in § 65.83(a)(3).
Each closed vent system shall meet the applicable requirements of § 65.143.
If the collected regulated material vapors are routed to a process or a fuel gas system as provided in § 65.83(a)(4), then each owner or operator shall meet the applicable requirements of § 65.142(c).
Notes, amendments, and revision history
Authority
Authority: 42 U.S.C. 7401 et seq.
Source
Source: 65 FR 78285, Dec. 14, 2000, unless otherwise noted.