§63.5987. What are my alternatives for meeting the emission limits for tire cord production affected sources? — Inbound Citations

(9) For each tire cord production affected source, the emission limit option in § 63.5986 and the compliance alternative in § 63.5987 that you have chosen to meet.

(b) Use the equations in this paragraph (b) to demonstrate initial and continuous compliance with the emission limits for tire cord production sources using the compliance alternatives described in § 63.5987(a) and (b).

(1) Determine the mass percent of all HAP in each coating according to the procedures in paragraph (a) of this section.

(2) If you do not use an add-on control device to meet the emission limits, use equation 1 to this section to calculate the monthly HAP emission rate in grams of HAP emitted per megagram of fabric processed at the tire cord production source to show that the monthly average HAP emissions do not exceed the emission limits in table 2 to this subpart, option 1. Equation 1 follows:

(3) If you use a control device to meet the emission limits, use equation 2 to this section to calculate the monthly HAP emission rate in grams of HAP emitted per megagram of fabric processed to show that the monthly average HAP emissions do not exceed the HAP emission limit in table 2 to this subpart, option 1. Equation 2 follows:

(b) Use the equations in this paragraph (b) to demonstrate initial and continuous compliance with the emission limits for tire cord production sources using the compliance alternatives described in § 63.5987(a) and (b).

(1) Determine the mass percent of all HAP in each coating according to the procedures in paragraph (a) of this section.

(2) If you do not use an add-on control device to meet the emission limits, use equation 1 to this section to calculate the monthly HAP emission rate in grams of HAP emitted per megagram of fabric processed at the tire cord production source to show that the monthly average HAP emissions do not exceed the emission limits in table 2 to this subpart, option 1. Equation 1 follows:

(3) If you use a control device to meet the emission limits, use equation 2 to this section to calculate the monthly HAP emission rate in grams of HAP emitted per megagram of fabric processed to show that the monthly average HAP emissions do not exceed the HAP emission limit in table 2 to this subpart, option 1. Equation 2 follows: