§63.5885. How do I calculate percent reduction to demonstrate compliance for continuous lamination/casting operations?
40 C.F.R. § 63.5885
You may calculate percent reduction using any of the methods in paragraphs (a) through (d) of this section.
Compliant line option. If all of your wet-out areas have PTE that meet the requirements of EPA Method 204 of appendix M of 40 CFR part 51, and all of your wet-out area organic HAP emissions and oven organic HAP emissions are vented to an add-on control device, use Equation 1 of this section to demonstrate compliance. In all other situations, use Equation 2 of this section to demonstrate compliance.
Averaging option. Use Equation 3 of this section to calculate percent reduction.
Add-on control device option. Use Equation 1 of this section to calculate percent reduction.
Combination option. Use Equations 1 through 3 of this section, as applicable, to calculate percent reduction.
Notes, amendments, and revision history
Amendments
[70 FR 50127, Aug. 25, 2005]
Source
Source: 68 FR 19402, Apr. 21, 2003, unless otherwise noted.
Authority
Authority: 42 U.S.C. 7401 et seq.
Source
Source: 57 FR 61992, Dec. 29, 1992, unless otherwise noted.
Amendments
[70 FR 50127, Aug. 25, 2005]