§63.5714. How do I demonstrate compliance if I use filled resins?
40 C.F.R. § 63.5714
If you are using a filled production resin or filled tooling resin, you must demonstrate compliance for the filled material on an as-applied basis using equation 1 of this section.
If the filled resin is used as a production resin and the value of PVF calculated by equation 1 of this section does not exceed 46 kilograms of organic HAP per megagram of filled resin applied, then the filled resin is in compliance.
If the filled resin is used as a tooling resin and the value of PVF calculated by equation 1 of this section does not exceed 54 kilograms of organic HAP per megagram of filled resin applied, then the filled resin is in compliance.
If you are including a filled resin in the emissions averaging procedure described in § 63.5710, then use the value of PVF calculated using equation 1 of this section for the value of PV i in equation 2 of § 63.5710.
Notes, amendments, and revision history
Source
Source: 66 FR 44232, Aug. 22, 2001, unless otherwise noted.
Authority
Authority: 42 U.S.C. 7401 et seq.
Source
Source: 57 FR 61992, Dec. 29, 1992, unless otherwise noted.