§60.3014. What are the operator training and qualification requirements? — Inbound Citations

(b) In the “model rule” of §§ 60.3000 through 60.3078, “you” means the owner or operator of an OSWI unit or air curtain incinerator subject to this subpart.

(2) Records showing the names of the OSWI unit operators who have completed the operator training requirements under § 60.3014, met the criteria for qualification under § 60.3016, and maintained or renewed their qualification under § 60.3017 or § 60.3018. Records must include documentation of training, the dates of the initial and refresher training, and the dates of their qualification and all subsequent renewals of such qualifications.

(k) Records showing the names of the OSWI unit operators who have completed the operator training requirements under § 60.3014, met the criteria for qualification under § 60.3016, and maintained or renewed their qualification under § 60.3017 or § 60.3018. Records must include documentation of training, the dates of the initial and refresher training, and the dates of their qualification and all subsequent renewals of such qualifications.

(g) For batch OSWI units, the start date, start time, and duration in hours of any deviation from the requirements to have a qualified operator accessible as required in § 60.3014.

(i) A qualified operator is accessible as required under § 60.3014(a).

(a) You must obtain operator qualification by completing a training course that satisfies the criteria under § 60.3014(c).

(c) Training must be obtained by completing an incinerator operator training course that includes, at a minimum, the three elements described in paragraphs (c)(1) through (3) of this section:

(iii) Operation of the specific type of incinerator to be used by the operator, including proper startup, waste charging, and shutdown procedures.

(iv) Combustion controls and monitoring, including good combustion practices and waste characterization procedures.

(vii) Methods to monitor pollutants (including monitoring of incinerator and control device operating parameters) and monitoring equipment calibration procedures, where applicable.

(viii) Actions to prevent and correct malfunctions or to prevent conditions that may lead to malfunction.

(x) Applicable Federal, state, and local regulations, including Occupational Safety and Health Administration workplace standards.

(3) Written material covering the training course topics that may serve as reference material following completion of the course.

(c) Training must be obtained by completing an incinerator operator training course that includes, at a minimum, the three elements described in paragraphs (c)(1) through (3) of this section:

(iii) Operation of the specific type of incinerator to be used by the operator, including proper startup, waste charging, and shutdown procedures.

(iv) Combustion controls and monitoring, including good combustion practices and waste characterization procedures.

(vii) Methods to monitor pollutants (including monitoring of incinerator and control device operating parameters) and monitoring equipment calibration procedures, where applicable.

(viii) Actions to prevent and correct malfunctions or to prevent conditions that may lead to malfunction.

(x) Applicable Federal, state, and local regulations, including Occupational Safety and Health Administration workplace standards.

(3) Written material covering the training course topics that may serve as reference material following completion of the course.

(b) Qualification is valid from the date on which the training course is completed and the operator successfully passes the examination required under § 60.3014(c)(2).

(c) Training must be obtained by completing an incinerator operator training course that includes, at a minimum, the three elements described in paragraphs (c)(1) through (3) of this section:

(iii) Operation of the specific type of incinerator to be used by the operator, including proper startup, waste charging, and shutdown procedures.

(iv) Combustion controls and monitoring, including good combustion practices and waste characterization procedures.

(vii) Methods to monitor pollutants (including monitoring of incinerator and control device operating parameters) and monitoring equipment calibration procedures, where applicable.

(viii) Actions to prevent and correct malfunctions or to prevent conditions that may lead to malfunction.

(x) Applicable Federal, state, and local regulations, including Occupational Safety and Health Administration workplace standards.

(3) Written material covering the training course topics that may serve as reference material following completion of the course.