§59.680. What definitions apply to this subpart? — Inbound Citations

(t) On July 14, 2012, Pennsylvania repealed the provisions set forth in Sections 130.101 through 130.108 pertaining to Portable Fuel Containers. Pennsylvania's regulations in the Pennsylvania State Implementation Plan were removed because they are superseded by more stringent Federal requirements codified at 40 CFR 59.600 through 59.699, relating to control of evaporative emissions from new and in-use portable fuel containers.

(a) Except as provided in § 59.605 and paragraph (b) of this section, the regulations in this subpart F apply for all portable fuel containers (defined in § 59.680) that are manufactured on or after January 1, 2009.

(c) Unless specifically noted otherwise, the term “you” means manufacturers, as defined in § 59.680.

(3) Any fuel that conforms to the specifications of ASTM D975 (incorporated by reference in § 1090.95) and is made available for use in a vehicle or engine designed to operate using diesel fuel.

Diesel fuel manufacturer means a fuel manufacturer that owns, leases, operates, controls, or supervises a diesel fuel manufacturing facility.

Distillate fuel means diesel fuel and other petroleum fuels with a T90 temperature below 700 °F that can be used in vehicles or engines that are designed to operate using diesel fuel. For example, diesel fuel, jet fuel, heating oil, No. 1 fuel (kerosene), No. 4 fuel, DMX, DMA, DMB, and DMC are distillate fuels. These specific fuel grades are identified in ASTM D975 and ISO 8217. Natural gas, LPG, and gasoline are not distillate fuels. T90 temperature is based on the distillation test method specified in § 1090.1350.

Distillate global marine fuel means global marine fuel that is distillate fuel.

Distributor means any person who transports, stores, or causes the transportation or storage of fuel, fuel additive, or regulated blendstock at any point between any fuel manufacturing facility, fuel additive manufacturing facility, or regulated blendstock production facility and any retail outlet or WPC facility.

Downstream location means any point in the fuel distribution system other than a fuel manufacturing facility through which fuel passes after it leaves the fuel manufacturing facility gate at which it was certified (e.g., fuel at facilities of distributors, pipelines, terminals, carriers, retailers, oxygenate blenders, and WPCs).

E0 means gasoline that contains no ethanol.

E10 means gasoline that contains at least 9 and no more than 10 volume percent ethanol.

E15 means gasoline that contains more than 10 and no more than 15 volume percent ethanol.

E85 means a fuel that contains more than 50 and no more than 83 volume percent ethanol and is used, intended for use, or made available for use in flex-fuel vehicles or flex-fuel engines. E85 is not gasoline.

ECA associated area has the meaning given in 40 CFR 1043.20.

ECA marine fuel means diesel fuel, distillate fuel, or residual fuel used, intended for use, or made available for use in C3 marine vessels while the vessels are operating within an ECA, or an ECA associated area.

Emission control area (ECA) has the meaning given in 40 CFR 1043.20.

Ethanol means an alcohol of the chemical formula C2H5OH.

Ethanol denaturant means PCG, gasoline blendstocks, or natural gas liquids that are added to anhydrous ethanol to make the ethanol unfit for human consumption as required and defined in 27 CFR parts 19 through 21.

Facility means any place, or series of places, where any fuel, fuel additive, or regulated blendstock is produced, imported, blended, transported, distributed, stored, or sold.

Flex-fuel engine has the same meaning as flexible-fuel engine in 40 CFR 1054.801.

Flex-fuel vehicle has the same meaning as flexible-fuel vehicle in 40 CFR 86.1803-01.

Fuel means only the fuels regulated under this part.

Fuel additive has the same meaning as additive in 40 CFR 79.2(e).

Fuel additive blender means any person who blends fuel additive into fuel in the United States, or any person who owns, leases, operates, controls, or supervises such an operation in the United States.

Fuel additive manufacturer means any person who owns, leases, operates, controls, or supervises a fuel additive manufacturing facility.

Fuel additive manufacturing facility means any facility where fuel additive is produced or imported.

Fuel blending facility means any facility, other than a refinery or transmix processing facility, where fuel is produced by combining blendstocks or by combining blendstocks with fuel. Types of blending facilities include, but are not limited to, terminals, storage tanks, plants, tanker trucks, retail outlets, and marine vessels.

Fuel dispenser means any apparatus used to dispense fuel into motor vehicles, nonroad vehicles, engines, equipment, or portable fuel containers (as defined in 40 CFR 59.680).

Fuel manufacturer means any person who owns, leases, operates, controls, or supervises a fuel manufacturing facility. Fuel manufacturers include refiners, importers, blending manufacturers, and transmix processors.

Fuel manufacturing facility means any facility where fuel is produced, imported, or recertified. Fuel manufacturing facilities include refineries, fuel blending facilities, transmix processing facilities, import facilities, and any facility where fuel is recertified.

Fuel manufacturing facility gate means the point where the fuel leaves the fuel manufacturing facility at which the fuel manufacturer certified the fuel.

Gasoline means any of the following: