§59.511. What notifications and reports must I submit? — Inbound Citations

(4) If you are a manufacturer, importer, or distributor, you can choose to certify that you will provide any or all of the recordkeeping and reporting requirements of §§ 59.510 and 59.511 by following the procedures of § 59.511(g) and (h).

(c) The content of all reports and applications required to be submitted to the Agency under § 59.511, § 59.509, or § 59.502 are not entitled to protection under Section 114(c) of the CAA.

(1) The aerosol coating category code for the coating, based on the category definitions in § 59.503. This code can be the default category code shown in Table 1 of this subpart or a company-specific code, if that code is explained as required by § 59.511(a);

(i) You must submit an initial notification no later than July 31, 2009, or on or before the date that you start manufacturing aerosol coating products that are sold in the United States, whichever is later. This initial notification must state that you are a foreign manufacturer that is intending to qualify for the small quantity manufacturer exemption in paragraph (e) of this section, provide all of the information specified in § 59.511(b), and provide all the information in paragraphs (f)(3)(i)(A) and (f)(3)(i)(B) of this section.

(A) The name, address, telephone number, and e-mail address of an agent located in the United States who will serve as your point of contact for communications with EPA.

(B) The address of each of your facilities that is manufacturing aerosol coatings for sale in the United States.

(k) Beginning on January 17, 2027, or once the notification/report template for this subpart has been available on the CEDRI website for six months, whichever date is later, regulated entities shall submit all notifications, reports, and other information required in paragraphs (b) through (j) of this section following the procedure specified in paragraph (l) of this section.

(b) Beginning on January 17, 2027, or once the notification/report template for this subpart has been available on the CEDRI website for six months, whichever date is later, regulated entities shall submit all notifications, reports, and other information required in § 59.511(b) through (j) following the procedure specified in § 59.511(l).

(6) All identification information included in § 59.511(b)(1) and (2).

(b) You must submit an initial notification no later than July 31, 2009, or on or before the date that you first manufacture, distribute, or import aerosol coatings, whichever is later. The initial notification must include the information in paragraphs (b)(1) through (b)(11) of this section.

(1) Company name;

(2) Name, title, address, telephone number, e-mail address and signature of certifying company official;

(3) A list of the product categories from Table 1 of this subpart that you manufacture, import, or distribute;

(4) The street address of each of your facilities in the United States that is manufacturing, packaging, or importing aerosol coatings that are subject to the provisions of this subpart, and the street address where compliance records are maintained for each site, if different;

(5) A description of date coding systems, clearly explaining how the date of manufacture is marked on each sales unit;

(6) An explanation of the product category codes that will be used on all required labels, or a statement that the default category codes in Table 1 of this subpart will be used;

(7) For each product category, an explanation of how the manufacturer, distributor, or importer will define a batch for the purpose of the recordkeeping requirements;

(8) [Reserved]

(9) For each product category, VOC formulation data for each formulation that you anticipate manufacturing, importing, or distributing for calendar year 2009 or for the first year that includes your compliance date, if different than 2009. If a regulated entity can certify that the reporting is being completed by another regulated entity for any product, no second report is required. The formulation data must include the weight fraction (g compound/g product) for each VOC ingredient used in the product in an amount greater than or equal to 0.1 percent. For each VOC ingredient reported, the formulation data must also include the information in either paragraph (b)(9)(i), (ii), or (iii) of this section.

(i) For compounds listed in table 2A to this subpart, the chemical name, CAS number, and the applicable reactivity factor;

(ii) For the hydrocarbon solvent mixtures listed in either table 2B or 2C to this subpart, the trade name, solvent mixture manufacturer, bin number, and the applicable reactivity factor; or

(iii) For compounds not listed in table 2A to this subpart, the chemical name, CAS number, and the default RF in § 59.505(e).

(10) For each product formulation, a list of the unique product codes by Universal Product Code (UPC), or other unique identifier; and

(11) A statement certifying that all products manufactured by the company that are subject to the limits in Table 1 of this subpart will be in compliance with those limits.

(6) All identification information included in § 59.511(b)(1) and (2).

(b) You must submit an initial notification no later than July 31, 2009, or on or before the date that you first manufacture, distribute, or import aerosol coatings, whichever is later. The initial notification must include the information in paragraphs (b)(1) through (b)(11) of this section.

(1) Company name;

(2) Name, title, address, telephone number, e-mail address and signature of certifying company official;

(3) A list of the product categories from Table 1 of this subpart that you manufacture, import, or distribute;

(4) The street address of each of your facilities in the United States that is manufacturing, packaging, or importing aerosol coatings that are subject to the provisions of this subpart, and the street address where compliance records are maintained for each site, if different;

(5) A description of date coding systems, clearly explaining how the date of manufacture is marked on each sales unit;

(6) An explanation of the product category codes that will be used on all required labels, or a statement that the default category codes in Table 1 of this subpart will be used;

(7) For each product category, an explanation of how the manufacturer, distributor, or importer will define a batch for the purpose of the recordkeeping requirements;

(8) [Reserved]

(9) For each product category, VOC formulation data for each formulation that you anticipate manufacturing, importing, or distributing for calendar year 2009 or for the first year that includes your compliance date, if different than 2009. If a regulated entity can certify that the reporting is being completed by another regulated entity for any product, no second report is required. The formulation data must include the weight fraction (g compound/g product) for each VOC ingredient used in the product in an amount greater than or equal to 0.1 percent. For each VOC ingredient reported, the formulation data must also include the information in either paragraph (b)(9)(i), (ii), or (iii) of this section.

(i) For compounds listed in table 2A to this subpart, the chemical name, CAS number, and the applicable reactivity factor;

(ii) For the hydrocarbon solvent mixtures listed in either table 2B or 2C to this subpart, the trade name, solvent mixture manufacturer, bin number, and the applicable reactivity factor; or

(iii) For compounds not listed in table 2A to this subpart, the chemical name, CAS number, and the default RF in § 59.505(e).

(10) For each product formulation, a list of the unique product codes by Universal Product Code (UPC), or other unique identifier; and

(11) A statement certifying that all products manufactured by the company that are subject to the limits in Table 1 of this subpart will be in compliance with those limits.

(b) You must submit an initial notification no later than July 31, 2009, or on or before the date that you first manufacture, distribute, or import aerosol coatings, whichever is later. The initial notification must include the information in paragraphs (b)(1) through (b)(11) of this section.

(1) Company name;

(2) Name, title, address, telephone number, e-mail address and signature of certifying company official;

(3) A list of the product categories from Table 1 of this subpart that you manufacture, import, or distribute;

(4) The street address of each of your facilities in the United States that is manufacturing, packaging, or importing aerosol coatings that are subject to the provisions of this subpart, and the street address where compliance records are maintained for each site, if different;

(5) A description of date coding systems, clearly explaining how the date of manufacture is marked on each sales unit;

(6) An explanation of the product category codes that will be used on all required labels, or a statement that the default category codes in Table 1 of this subpart will be used;

(7) For each product category, an explanation of how the manufacturer, distributor, or importer will define a batch for the purpose of the recordkeeping requirements;

(8) [Reserved]

(9) For each product category, VOC formulation data for each formulation that you anticipate manufacturing, importing, or distributing for calendar year 2009 or for the first year that includes your compliance date, if different than 2009. If a regulated entity can certify that the reporting is being completed by another regulated entity for any product, no second report is required. The formulation data must include the weight fraction (g compound/g product) for each VOC ingredient used in the product in an amount greater than or equal to 0.1 percent. For each VOC ingredient reported, the formulation data must also include the information in either paragraph (b)(9)(i), (ii), or (iii) of this section.

(i) For compounds listed in table 2A to this subpart, the chemical name, CAS number, and the applicable reactivity factor;

(ii) For the hydrocarbon solvent mixtures listed in either table 2B or 2C to this subpart, the trade name, solvent mixture manufacturer, bin number, and the applicable reactivity factor; or

(iii) For compounds not listed in table 2A to this subpart, the chemical name, CAS number, and the default RF in § 59.505(e).

(10) For each product formulation, a list of the unique product codes by Universal Product Code (UPC), or other unique identifier; and

(11) A statement certifying that all products manufactured by the company that are subject to the limits in Table 1 of this subpart will be in compliance with those limits.

(2) You are required to maintain records of the following at the location specified in § 59.511(b)(4) for each product subject to the PWR limits in Table 1 of this subpart: The product category, all product calculations, the PWR, and the weight fraction of all ingredients including: Water, total solids, each VOC, and any other compounds assigned a RF of zero as specified in § 59.505. Solids do not have to be listed individually in these records. If an individual VOC is present in an amount less than 0.1 percent by weight, then it does not need to be reported as an ingredient. An impurity that meets the definition provided in § 59.503 does not have to be reported as an ingredient. For each batch of each product subject to the PWR limits, you must maintain records of the date the batch was manufactured, the volume of the batch, the recipe used for formulating the batch, and the number of cans manufactured in each batch and each formulation.

(b) You must submit an initial notification no later than July 31, 2009, or on or before the date that you first manufacture, distribute, or import aerosol coatings, whichever is later. The initial notification must include the information in paragraphs (b)(1) through (b)(11) of this section.

(1) Company name;

(2) Name, title, address, telephone number, e-mail address and signature of certifying company official;

(3) A list of the product categories from Table 1 of this subpart that you manufacture, import, or distribute;

(4) The street address of each of your facilities in the United States that is manufacturing, packaging, or importing aerosol coatings that are subject to the provisions of this subpart, and the street address where compliance records are maintained for each site, if different;

(5) A description of date coding systems, clearly explaining how the date of manufacture is marked on each sales unit;

(6) An explanation of the product category codes that will be used on all required labels, or a statement that the default category codes in Table 1 of this subpart will be used;

(7) For each product category, an explanation of how the manufacturer, distributor, or importer will define a batch for the purpose of the recordkeeping requirements;

(8) [Reserved]

(9) For each product category, VOC formulation data for each formulation that you anticipate manufacturing, importing, or distributing for calendar year 2009 or for the first year that includes your compliance date, if different than 2009. If a regulated entity can certify that the reporting is being completed by another regulated entity for any product, no second report is required. The formulation data must include the weight fraction (g compound/g product) for each VOC ingredient used in the product in an amount greater than or equal to 0.1 percent. For each VOC ingredient reported, the formulation data must also include the information in either paragraph (b)(9)(i), (ii), or (iii) of this section.

(i) For compounds listed in table 2A to this subpart, the chemical name, CAS number, and the applicable reactivity factor;

(ii) For the hydrocarbon solvent mixtures listed in either table 2B or 2C to this subpart, the trade name, solvent mixture manufacturer, bin number, and the applicable reactivity factor; or

(iii) For compounds not listed in table 2A to this subpart, the chemical name, CAS number, and the default RF in § 59.505(e).

(10) For each product formulation, a list of the unique product codes by Universal Product Code (UPC), or other unique identifier; and

(11) A statement certifying that all products manufactured by the company that are subject to the limits in Table 1 of this subpart will be in compliance with those limits.

(b) You must submit an initial notification no later than July 31, 2009, or on or before the date that you first manufacture, distribute, or import aerosol coatings, whichever is later. The initial notification must include the information in paragraphs (b)(1) through (b)(11) of this section.

(1) Company name;

(2) Name, title, address, telephone number, e-mail address and signature of certifying company official;

(3) A list of the product categories from Table 1 of this subpart that you manufacture, import, or distribute;

(4) The street address of each of your facilities in the United States that is manufacturing, packaging, or importing aerosol coatings that are subject to the provisions of this subpart, and the street address where compliance records are maintained for each site, if different;

(5) A description of date coding systems, clearly explaining how the date of manufacture is marked on each sales unit;

(6) An explanation of the product category codes that will be used on all required labels, or a statement that the default category codes in Table 1 of this subpart will be used;

(7) For each product category, an explanation of how the manufacturer, distributor, or importer will define a batch for the purpose of the recordkeeping requirements;

(8) [Reserved]

(9) For each product category, VOC formulation data for each formulation that you anticipate manufacturing, importing, or distributing for calendar year 2009 or for the first year that includes your compliance date, if different than 2009. If a regulated entity can certify that the reporting is being completed by another regulated entity for any product, no second report is required. The formulation data must include the weight fraction (g compound/g product) for each VOC ingredient used in the product in an amount greater than or equal to 0.1 percent. For each VOC ingredient reported, the formulation data must also include the information in either paragraph (b)(9)(i), (ii), or (iii) of this section.

(i) For compounds listed in table 2A to this subpart, the chemical name, CAS number, and the applicable reactivity factor;

(ii) For the hydrocarbon solvent mixtures listed in either table 2B or 2C to this subpart, the trade name, solvent mixture manufacturer, bin number, and the applicable reactivity factor; or

(iii) For compounds not listed in table 2A to this subpart, the chemical name, CAS number, and the default RF in § 59.505(e).

(10) For each product formulation, a list of the unique product codes by Universal Product Code (UPC), or other unique identifier; and

(11) A statement certifying that all products manufactured by the company that are subject to the limits in Table 1 of this subpart will be in compliance with those limits.

(b) You must submit an initial notification no later than July 31, 2009, or on or before the date that you first manufacture, distribute, or import aerosol coatings, whichever is later. The initial notification must include the information in paragraphs (b)(1) through (b)(11) of this section.

(1) Company name;

(2) Name, title, address, telephone number, e-mail address and signature of certifying company official;

(3) A list of the product categories from Table 1 of this subpart that you manufacture, import, or distribute;

(4) The street address of each of your facilities in the United States that is manufacturing, packaging, or importing aerosol coatings that are subject to the provisions of this subpart, and the street address where compliance records are maintained for each site, if different;

(5) A description of date coding systems, clearly explaining how the date of manufacture is marked on each sales unit;

(6) An explanation of the product category codes that will be used on all required labels, or a statement that the default category codes in Table 1 of this subpart will be used;

(7) For each product category, an explanation of how the manufacturer, distributor, or importer will define a batch for the purpose of the recordkeeping requirements;

(8) [Reserved]

(9) For each product category, VOC formulation data for each formulation that you anticipate manufacturing, importing, or distributing for calendar year 2009 or for the first year that includes your compliance date, if different than 2009. If a regulated entity can certify that the reporting is being completed by another regulated entity for any product, no second report is required. The formulation data must include the weight fraction (g compound/g product) for each VOC ingredient used in the product in an amount greater than or equal to 0.1 percent. For each VOC ingredient reported, the formulation data must also include the information in either paragraph (b)(9)(i), (ii), or (iii) of this section.

(i) For compounds listed in table 2A to this subpart, the chemical name, CAS number, and the applicable reactivity factor;

(ii) For the hydrocarbon solvent mixtures listed in either table 2B or 2C to this subpart, the trade name, solvent mixture manufacturer, bin number, and the applicable reactivity factor; or

(iii) For compounds not listed in table 2A to this subpart, the chemical name, CAS number, and the default RF in § 59.505(e).

(10) For each product formulation, a list of the unique product codes by Universal Product Code (UPC), or other unique identifier; and

(11) A statement certifying that all products manufactured by the company that are subject to the limits in Table 1 of this subpart will be in compliance with those limits.

(b) You must submit an initial notification no later than July 31, 2009, or on or before the date that you first manufacture, distribute, or import aerosol coatings, whichever is later. The initial notification must include the information in paragraphs (b)(1) through (b)(11) of this section.

(1) Company name;

(2) Name, title, address, telephone number, e-mail address and signature of certifying company official;

(3) A list of the product categories from Table 1 of this subpart that you manufacture, import, or distribute;

(4) The street address of each of your facilities in the United States that is manufacturing, packaging, or importing aerosol coatings that are subject to the provisions of this subpart, and the street address where compliance records are maintained for each site, if different;

(5) A description of date coding systems, clearly explaining how the date of manufacture is marked on each sales unit;

(6) An explanation of the product category codes that will be used on all required labels, or a statement that the default category codes in Table 1 of this subpart will be used;

(7) For each product category, an explanation of how the manufacturer, distributor, or importer will define a batch for the purpose of the recordkeeping requirements;

(8) [Reserved]

(9) For each product category, VOC formulation data for each formulation that you anticipate manufacturing, importing, or distributing for calendar year 2009 or for the first year that includes your compliance date, if different than 2009. If a regulated entity can certify that the reporting is being completed by another regulated entity for any product, no second report is required. The formulation data must include the weight fraction (g compound/g product) for each VOC ingredient used in the product in an amount greater than or equal to 0.1 percent. For each VOC ingredient reported, the formulation data must also include the information in either paragraph (b)(9)(i), (ii), or (iii) of this section.

(i) For compounds listed in table 2A to this subpart, the chemical name, CAS number, and the applicable reactivity factor;

(ii) For the hydrocarbon solvent mixtures listed in either table 2B or 2C to this subpart, the trade name, solvent mixture manufacturer, bin number, and the applicable reactivity factor; or

(iii) For compounds not listed in table 2A to this subpart, the chemical name, CAS number, and the default RF in § 59.505(e).

(10) For each product formulation, a list of the unique product codes by Universal Product Code (UPC), or other unique identifier; and

(11) A statement certifying that all products manufactured by the company that are subject to the limits in Table 1 of this subpart will be in compliance with those limits.

(b) You must submit an initial notification no later than July 31, 2009, or on or before the date that you first manufacture, distribute, or import aerosol coatings, whichever is later. The initial notification must include the information in paragraphs (b)(1) through (b)(11) of this section.

(1) Company name;

(2) Name, title, address, telephone number, e-mail address and signature of certifying company official;

(3) A list of the product categories from Table 1 of this subpart that you manufacture, import, or distribute;

(4) The street address of each of your facilities in the United States that is manufacturing, packaging, or importing aerosol coatings that are subject to the provisions of this subpart, and the street address where compliance records are maintained for each site, if different;

(5) A description of date coding systems, clearly explaining how the date of manufacture is marked on each sales unit;

(6) An explanation of the product category codes that will be used on all required labels, or a statement that the default category codes in Table 1 of this subpart will be used;

(7) For each product category, an explanation of how the manufacturer, distributor, or importer will define a batch for the purpose of the recordkeeping requirements;

(8) [Reserved]

(9) For each product category, VOC formulation data for each formulation that you anticipate manufacturing, importing, or distributing for calendar year 2009 or for the first year that includes your compliance date, if different than 2009. If a regulated entity can certify that the reporting is being completed by another regulated entity for any product, no second report is required. The formulation data must include the weight fraction (g compound/g product) for each VOC ingredient used in the product in an amount greater than or equal to 0.1 percent. For each VOC ingredient reported, the formulation data must also include the information in either paragraph (b)(9)(i), (ii), or (iii) of this section.

(i) For compounds listed in table 2A to this subpart, the chemical name, CAS number, and the applicable reactivity factor;

(ii) For the hydrocarbon solvent mixtures listed in either table 2B or 2C to this subpart, the trade name, solvent mixture manufacturer, bin number, and the applicable reactivity factor; or

(iii) For compounds not listed in table 2A to this subpart, the chemical name, CAS number, and the default RF in § 59.505(e).

(10) For each product formulation, a list of the unique product codes by Universal Product Code (UPC), or other unique identifier; and

(11) A statement certifying that all products manufactured by the company that are subject to the limits in Table 1 of this subpart will be in compliance with those limits.

(b) You must submit an initial notification no later than July 31, 2009, or on or before the date that you first manufacture, distribute, or import aerosol coatings, whichever is later. The initial notification must include the information in paragraphs (b)(1) through (b)(11) of this section.

(1) Company name;

(2) Name, title, address, telephone number, e-mail address and signature of certifying company official;

(3) A list of the product categories from Table 1 of this subpart that you manufacture, import, or distribute;

(4) The street address of each of your facilities in the United States that is manufacturing, packaging, or importing aerosol coatings that are subject to the provisions of this subpart, and the street address where compliance records are maintained for each site, if different;

(5) A description of date coding systems, clearly explaining how the date of manufacture is marked on each sales unit;

(6) An explanation of the product category codes that will be used on all required labels, or a statement that the default category codes in Table 1 of this subpart will be used;

(7) For each product category, an explanation of how the manufacturer, distributor, or importer will define a batch for the purpose of the recordkeeping requirements;

(8) [Reserved]

(9) For each product category, VOC formulation data for each formulation that you anticipate manufacturing, importing, or distributing for calendar year 2009 or for the first year that includes your compliance date, if different than 2009. If a regulated entity can certify that the reporting is being completed by another regulated entity for any product, no second report is required. The formulation data must include the weight fraction (g compound/g product) for each VOC ingredient used in the product in an amount greater than or equal to 0.1 percent. For each VOC ingredient reported, the formulation data must also include the information in either paragraph (b)(9)(i), (ii), or (iii) of this section.

(i) For compounds listed in table 2A to this subpart, the chemical name, CAS number, and the applicable reactivity factor;

(ii) For the hydrocarbon solvent mixtures listed in either table 2B or 2C to this subpart, the trade name, solvent mixture manufacturer, bin number, and the applicable reactivity factor; or

(iii) For compounds not listed in table 2A to this subpart, the chemical name, CAS number, and the default RF in § 59.505(e).

(10) For each product formulation, a list of the unique product codes by Universal Product Code (UPC), or other unique identifier; and

(11) A statement certifying that all products manufactured by the company that are subject to the limits in Table 1 of this subpart will be in compliance with those limits.

(b) You must submit an initial notification no later than July 31, 2009, or on or before the date that you first manufacture, distribute, or import aerosol coatings, whichever is later. The initial notification must include the information in paragraphs (b)(1) through (b)(11) of this section.

(1) Company name;

(2) Name, title, address, telephone number, e-mail address and signature of certifying company official;

(3) A list of the product categories from Table 1 of this subpart that you manufacture, import, or distribute;

(4) The street address of each of your facilities in the United States that is manufacturing, packaging, or importing aerosol coatings that are subject to the provisions of this subpart, and the street address where compliance records are maintained for each site, if different;

(5) A description of date coding systems, clearly explaining how the date of manufacture is marked on each sales unit;

(6) An explanation of the product category codes that will be used on all required labels, or a statement that the default category codes in Table 1 of this subpart will be used;

(7) For each product category, an explanation of how the manufacturer, distributor, or importer will define a batch for the purpose of the recordkeeping requirements;

(8) [Reserved]

(9) For each product category, VOC formulation data for each formulation that you anticipate manufacturing, importing, or distributing for calendar year 2009 or for the first year that includes your compliance date, if different than 2009. If a regulated entity can certify that the reporting is being completed by another regulated entity for any product, no second report is required. The formulation data must include the weight fraction (g compound/g product) for each VOC ingredient used in the product in an amount greater than or equal to 0.1 percent. For each VOC ingredient reported, the formulation data must also include the information in either paragraph (b)(9)(i), (ii), or (iii) of this section.

(i) For compounds listed in table 2A to this subpart, the chemical name, CAS number, and the applicable reactivity factor;

(ii) For the hydrocarbon solvent mixtures listed in either table 2B or 2C to this subpart, the trade name, solvent mixture manufacturer, bin number, and the applicable reactivity factor; or

(iii) For compounds not listed in table 2A to this subpart, the chemical name, CAS number, and the default RF in § 59.505(e).

(10) For each product formulation, a list of the unique product codes by Universal Product Code (UPC), or other unique identifier; and

(11) A statement certifying that all products manufactured by the company that are subject to the limits in Table 1 of this subpart will be in compliance with those limits.

(b) You must submit an initial notification no later than July 31, 2009, or on or before the date that you first manufacture, distribute, or import aerosol coatings, whichever is later. The initial notification must include the information in paragraphs (b)(1) through (b)(11) of this section.

(1) Company name;

(2) Name, title, address, telephone number, e-mail address and signature of certifying company official;

(3) A list of the product categories from Table 1 of this subpart that you manufacture, import, or distribute;

(4) The street address of each of your facilities in the United States that is manufacturing, packaging, or importing aerosol coatings that are subject to the provisions of this subpart, and the street address where compliance records are maintained for each site, if different;

(5) A description of date coding systems, clearly explaining how the date of manufacture is marked on each sales unit;

(6) An explanation of the product category codes that will be used on all required labels, or a statement that the default category codes in Table 1 of this subpart will be used;

(7) For each product category, an explanation of how the manufacturer, distributor, or importer will define a batch for the purpose of the recordkeeping requirements;

(8) [Reserved]

(9) For each product category, VOC formulation data for each formulation that you anticipate manufacturing, importing, or distributing for calendar year 2009 or for the first year that includes your compliance date, if different than 2009. If a regulated entity can certify that the reporting is being completed by another regulated entity for any product, no second report is required. The formulation data must include the weight fraction (g compound/g product) for each VOC ingredient used in the product in an amount greater than or equal to 0.1 percent. For each VOC ingredient reported, the formulation data must also include the information in either paragraph (b)(9)(i), (ii), or (iii) of this section.

(i) For compounds listed in table 2A to this subpart, the chemical name, CAS number, and the applicable reactivity factor;

(ii) For the hydrocarbon solvent mixtures listed in either table 2B or 2C to this subpart, the trade name, solvent mixture manufacturer, bin number, and the applicable reactivity factor; or

(iii) For compounds not listed in table 2A to this subpart, the chemical name, CAS number, and the default RF in § 59.505(e).

(10) For each product formulation, a list of the unique product codes by Universal Product Code (UPC), or other unique identifier; and

(11) A statement certifying that all products manufactured by the company that are subject to the limits in Table 1 of this subpart will be in compliance with those limits.

(k) Beginning on January 17, 2027, or once the notification/report template for this subpart has been available on the CEDRI website for six months, whichever date is later, regulated entities shall submit all notifications, reports, and other information required in paragraphs (b) through (j) of this section following the procedure specified in paragraph (l) of this section.

(b) Beginning on January 17, 2027, or once the notification/report template for this subpart has been available on the CEDRI website for six months, whichever date is later, regulated entities shall submit all notifications, reports, and other information required in § 59.511(b) through (j) following the procedure specified in § 59.511(l).

(iii) The agent identified above must maintain a copy of the compliance records specified in § 59.510(b). Those records must be kept by the agent such that the agent will be able to provide the written report which must be submitted upon 60 days notice under § 59.511(d) and able to make those records available for inspection and review under § 59.511(e).

(k) Beginning on January 17, 2027, or once the notification/report template for this subpart has been available on the CEDRI website for six months, whichever date is later, regulated entities shall submit all notifications, reports, and other information required in paragraphs (b) through (j) of this section following the procedure specified in paragraph (l) of this section.

(b) Beginning on January 17, 2027, or once the notification/report template for this subpart has been available on the CEDRI website for six months, whichever date is later, regulated entities shall submit all notifications, reports, and other information required in § 59.511(b) through (j) following the procedure specified in § 59.511(l).

(d) Upon 60 days written notice, you must submit to the Administrator a written report with all the information in paragraphs (d)(1) through (6) of this section for each product you manufacture, distribute, or import under your name or another company's name.

(1) The brand name of the product;

(2) A copy of the product label;

(3) The owner of the trademark or brand names;

(4) The product category as defined in § 59.503;

(5) For each product, formulation data for each formulation that manufactured, imported, or distributed in the requested time period. The formulation data must include the weight fraction (g compound/g product) for each VOC ingredient used in the product in an amount greater than or equal to 0.1 percent, plus the weight fraction of all other ingredients, including: Water, total solids, and any other compounds assigned an RF of zero. The formulation data must also include the information in either paragraph (d)(5)(i), (ii), or (iii) of this section.

(i) For compounds listed in table 2A to this subpart, the chemical name, CAS number, and the applicable reactivity factor;

(ii) For the hydrocarbon solvent mixtures listed in either table 2B or 2C to this subpart, the trade name, solvent mixture manufacturer, bin number, and the applicable reactivity factor; or

(iii) For compounds not listed in table 2A to this subpart, the chemical name, CAS number, and the default RF in § 59.505(e).

(d) Upon 60 days written notice, you must submit to the Administrator a written report with all the information in paragraphs (d)(1) through (6) of this section for each product you manufacture, distribute, or import under your name or another company's name.

(1) The brand name of the product;

(2) A copy of the product label;

(3) The owner of the trademark or brand names;

(4) The product category as defined in § 59.503;

(5) For each product, formulation data for each formulation that manufactured, imported, or distributed in the requested time period. The formulation data must include the weight fraction (g compound/g product) for each VOC ingredient used in the product in an amount greater than or equal to 0.1 percent, plus the weight fraction of all other ingredients, including: Water, total solids, and any other compounds assigned an RF of zero. The formulation data must also include the information in either paragraph (d)(5)(i), (ii), or (iii) of this section.

(i) For compounds listed in table 2A to this subpart, the chemical name, CAS number, and the applicable reactivity factor;

(ii) For the hydrocarbon solvent mixtures listed in either table 2B or 2C to this subpart, the trade name, solvent mixture manufacturer, bin number, and the applicable reactivity factor; or

(iii) For compounds not listed in table 2A to this subpart, the chemical name, CAS number, and the default RF in § 59.505(e).

(d) Upon 60 days written notice, you must submit to the Administrator a written report with all the information in paragraphs (d)(1) through (6) of this section for each product you manufacture, distribute, or import under your name or another company's name.

(1) The brand name of the product;

(2) A copy of the product label;

(3) The owner of the trademark or brand names;

(4) The product category as defined in § 59.503;

(5) For each product, formulation data for each formulation that manufactured, imported, or distributed in the requested time period. The formulation data must include the weight fraction (g compound/g product) for each VOC ingredient used in the product in an amount greater than or equal to 0.1 percent, plus the weight fraction of all other ingredients, including: Water, total solids, and any other compounds assigned an RF of zero. The formulation data must also include the information in either paragraph (d)(5)(i), (ii), or (iii) of this section.

(i) For compounds listed in table 2A to this subpart, the chemical name, CAS number, and the applicable reactivity factor;

(ii) For the hydrocarbon solvent mixtures listed in either table 2B or 2C to this subpart, the trade name, solvent mixture manufacturer, bin number, and the applicable reactivity factor; or

(iii) For compounds not listed in table 2A to this subpart, the chemical name, CAS number, and the default RF in § 59.505(e).

(d) Upon 60 days written notice, you must submit to the Administrator a written report with all the information in paragraphs (d)(1) through (6) of this section for each product you manufacture, distribute, or import under your name or another company's name.

(1) The brand name of the product;

(2) A copy of the product label;

(3) The owner of the trademark or brand names;

(4) The product category as defined in § 59.503;

(5) For each product, formulation data for each formulation that manufactured, imported, or distributed in the requested time period. The formulation data must include the weight fraction (g compound/g product) for each VOC ingredient used in the product in an amount greater than or equal to 0.1 percent, plus the weight fraction of all other ingredients, including: Water, total solids, and any other compounds assigned an RF of zero. The formulation data must also include the information in either paragraph (d)(5)(i), (ii), or (iii) of this section.

(i) For compounds listed in table 2A to this subpart, the chemical name, CAS number, and the applicable reactivity factor;

(ii) For the hydrocarbon solvent mixtures listed in either table 2B or 2C to this subpart, the trade name, solvent mixture manufacturer, bin number, and the applicable reactivity factor; or

(iii) For compounds not listed in table 2A to this subpart, the chemical name, CAS number, and the default RF in § 59.505(e).

(d) Upon 60 days written notice, you must submit to the Administrator a written report with all the information in paragraphs (d)(1) through (6) of this section for each product you manufacture, distribute, or import under your name or another company's name.

(1) The brand name of the product;

(2) A copy of the product label;

(3) The owner of the trademark or brand names;

(4) The product category as defined in § 59.503;

(5) For each product, formulation data for each formulation that manufactured, imported, or distributed in the requested time period. The formulation data must include the weight fraction (g compound/g product) for each VOC ingredient used in the product in an amount greater than or equal to 0.1 percent, plus the weight fraction of all other ingredients, including: Water, total solids, and any other compounds assigned an RF of zero. The formulation data must also include the information in either paragraph (d)(5)(i), (ii), or (iii) of this section.

(i) For compounds listed in table 2A to this subpart, the chemical name, CAS number, and the applicable reactivity factor;

(ii) For the hydrocarbon solvent mixtures listed in either table 2B or 2C to this subpart, the trade name, solvent mixture manufacturer, bin number, and the applicable reactivity factor; or

(iii) For compounds not listed in table 2A to this subpart, the chemical name, CAS number, and the default RF in § 59.505(e).

(d) Upon 60 days written notice, you must submit to the Administrator a written report with all the information in paragraphs (d)(1) through (6) of this section for each product you manufacture, distribute, or import under your name or another company's name.

(1) The brand name of the product;

(2) A copy of the product label;

(3) The owner of the trademark or brand names;

(4) The product category as defined in § 59.503;

(5) For each product, formulation data for each formulation that manufactured, imported, or distributed in the requested time period. The formulation data must include the weight fraction (g compound/g product) for each VOC ingredient used in the product in an amount greater than or equal to 0.1 percent, plus the weight fraction of all other ingredients, including: Water, total solids, and any other compounds assigned an RF of zero. The formulation data must also include the information in either paragraph (d)(5)(i), (ii), or (iii) of this section.

(i) For compounds listed in table 2A to this subpart, the chemical name, CAS number, and the applicable reactivity factor;

(ii) For the hydrocarbon solvent mixtures listed in either table 2B or 2C to this subpart, the trade name, solvent mixture manufacturer, bin number, and the applicable reactivity factor; or

(iii) For compounds not listed in table 2A to this subpart, the chemical name, CAS number, and the default RF in § 59.505(e).

(iii) The agent identified above must maintain a copy of the compliance records specified in § 59.510(b). Those records must be kept by the agent such that the agent will be able to provide the written report which must be submitted upon 60 days notice under § 59.511(d) and able to make those records available for inspection and review under § 59.511(e).

(k) Beginning on January 17, 2027, or once the notification/report template for this subpart has been available on the CEDRI website for six months, whichever date is later, regulated entities shall submit all notifications, reports, and other information required in paragraphs (b) through (j) of this section following the procedure specified in paragraph (l) of this section.

(b) Beginning on January 17, 2027, or once the notification/report template for this subpart has been available on the CEDRI website for six months, whichever date is later, regulated entities shall submit all notifications, reports, and other information required in § 59.511(b) through (j) following the procedure specified in § 59.511(l).

(e) If you claim the exemption under § 59.501(e), you must submit an initial notification no later than July 31, 2009, or on or before the date that you first manufacture aerosol coatings, whichever is later.The initial notification must include the information in paragraphs (e)(1) through (e)(6) of this section.

(1) Company name;

(2) Name, title, number, address, telephone number, e-mail address, and signature of certifying company official;

(3) A list of the product categories from Table 1 of this subpart that you manufacture;

(4) The total amount of product you manufacture in each category and the total VOC mass content of such products for the preceding calendar year;

(5) The street address of each of your facilities in the United States that is manufacturing aerosol coatings that are subject to the provisions of this subpart and the street address where compliance records are maintained for each site, if different; and

(e) If you claim the exemption under § 59.501(e), you must submit an initial notification no later than July 31, 2009, or on or before the date that you first manufacture aerosol coatings, whichever is later.The initial notification must include the information in paragraphs (e)(1) through (e)(6) of this section.

(1) Company name;

(2) Name, title, number, address, telephone number, e-mail address, and signature of certifying company official;

(3) A list of the product categories from Table 1 of this subpart that you manufacture;

(4) The total amount of product you manufacture in each category and the total VOC mass content of such products for the preceding calendar year;

(5) The street address of each of your facilities in the United States that is manufacturing aerosol coatings that are subject to the provisions of this subpart and the street address where compliance records are maintained for each site, if different; and

(e) If you claim the exemption under § 59.501(e), you must submit an initial notification no later than July 31, 2009, or on or before the date that you first manufacture aerosol coatings, whichever is later.The initial notification must include the information in paragraphs (e)(1) through (e)(6) of this section.

(1) Company name;

(2) Name, title, number, address, telephone number, e-mail address, and signature of certifying company official;

(3) A list of the product categories from Table 1 of this subpart that you manufacture;

(4) The total amount of product you manufacture in each category and the total VOC mass content of such products for the preceding calendar year;

(5) The street address of each of your facilities in the United States that is manufacturing aerosol coatings that are subject to the provisions of this subpart and the street address where compliance records are maintained for each site, if different; and

(e) If you claim the exemption under § 59.501(e), you must submit an initial notification no later than July 31, 2009, or on or before the date that you first manufacture aerosol coatings, whichever is later.The initial notification must include the information in paragraphs (e)(1) through (e)(6) of this section.

(1) Company name;

(2) Name, title, number, address, telephone number, e-mail address, and signature of certifying company official;

(3) A list of the product categories from Table 1 of this subpart that you manufacture;

(4) The total amount of product you manufacture in each category and the total VOC mass content of such products for the preceding calendar year;

(5) The street address of each of your facilities in the United States that is manufacturing aerosol coatings that are subject to the provisions of this subpart and the street address where compliance records are maintained for each site, if different; and

(e) If you claim the exemption under § 59.501(e), you must submit an initial notification no later than July 31, 2009, or on or before the date that you first manufacture aerosol coatings, whichever is later.The initial notification must include the information in paragraphs (e)(1) through (e)(6) of this section.

(1) Company name;

(2) Name, title, number, address, telephone number, e-mail address, and signature of certifying company official;

(3) A list of the product categories from Table 1 of this subpart that you manufacture;

(4) The total amount of product you manufacture in each category and the total VOC mass content of such products for the preceding calendar year;

(5) The street address of each of your facilities in the United States that is manufacturing aerosol coatings that are subject to the provisions of this subpart and the street address where compliance records are maintained for each site, if different; and

(e) If you claim the exemption under § 59.501(e), you must submit an initial notification no later than July 31, 2009, or on or before the date that you first manufacture aerosol coatings, whichever is later.The initial notification must include the information in paragraphs (e)(1) through (e)(6) of this section.

(1) Company name;

(2) Name, title, number, address, telephone number, e-mail address, and signature of certifying company official;

(3) A list of the product categories from Table 1 of this subpart that you manufacture;

(4) The total amount of product you manufacture in each category and the total VOC mass content of such products for the preceding calendar year;

(5) The street address of each of your facilities in the United States that is manufacturing aerosol coatings that are subject to the provisions of this subpart and the street address where compliance records are maintained for each site, if different; and

(k) Beginning on January 17, 2027, or once the notification/report template for this subpart has been available on the CEDRI website for six months, whichever date is later, regulated entities shall submit all notifications, reports, and other information required in paragraphs (b) through (j) of this section following the procedure specified in paragraph (l) of this section.

(b) Beginning on January 17, 2027, or once the notification/report template for this subpart has been available on the CEDRI website for six months, whichever date is later, regulated entities shall submit all notifications, reports, and other information required in § 59.511(b) through (j) following the procedure specified in § 59.511(l).

(4) If you are a manufacturer, importer, or distributor, you can choose to certify that you will provide any or all of the recordkeeping and reporting requirements of §§ 59.510 and 59.511 by following the procedures of § 59.511(g) and (h).

(a) If you are the regulated entity identified in § 59.501(a) as being responsible for recordkeeping for a product, and no other person has certified that they will fulfill your recordkeeping responsibilities as provided in § 59.511(g), you must comply with paragraphs (a)(1) through (a)(5) of this section:

(1) All records must be maintained on and after the applicable compliance date listed in § 59.502.

(2) You are required to maintain records of the following at the location specified in § 59.511(b)(4) for each product subject to the PWR limits in Table 1 of this subpart: The product category, all product calculations, the PWR, and the weight fraction of all ingredients including: Water, total solids, each VOC, and any other compounds assigned a RF of zero as specified in § 59.505. Solids do not have to be listed individually in these records. If an individual VOC is present in an amount less than 0.1 percent by weight, then it does not need to be reported as an ingredient. An impurity that meets the definition provided in § 59.503 does not have to be reported as an ingredient. For each batch of each product subject to the PWR limits, you must maintain records of the date the batch was manufactured, the volume of the batch, the recipe used for formulating the batch, and the number of cans manufactured in each batch and each formulation.

(3) You must maintain a copy of each notification and report that you submit to comply with this subpart, the documentation supporting each notification, and a copy of the label for each product.

(4) If you claim the exemption under § 59.501(e), you must maintain a copy of the initial report and each annual report that you submit to EPA, and the documentation supporting such report.

(5) You must maintain all records required by this subpart for a minimum of 5 years. The records must be in a form suitable and readily available for inspection and review.

(k) Beginning on January 17, 2027, or once the notification/report template for this subpart has been available on the CEDRI website for six months, whichever date is later, regulated entities shall submit all notifications, reports, and other information required in paragraphs (b) through (j) of this section following the procedure specified in paragraph (l) of this section.

(b) Beginning on January 17, 2027, or once the notification/report template for this subpart has been available on the CEDRI website for six months, whichever date is later, regulated entities shall submit all notifications, reports, and other information required in § 59.511(b) through (j) following the procedure specified in § 59.511(l).

(4) If you are a manufacturer, importer, or distributor, you can choose to certify that you will provide any or all of the recordkeeping and reporting requirements of §§ 59.510 and 59.511 by following the procedures of § 59.511(g) and (h).

(b) By providing the written certification to the Administrator in accordance with § 59.511(g), the certifying entity accepts responsibility for compliance with the recordkeeping requirements of this section with respect to any products covered by the written certification, as detailed in the written certification. Failure to maintain the required records may result in enforcement action by EPA against the certifying entity in accordance with the enforcement provisions applicable to violation of these provisions by regulated entities. If the certifying entity revokes its certification, as allowed by § 59.511(h), the regulated entity must assume responsibility for maintaining all records required by this section.

(k) Beginning on January 17, 2027, or once the notification/report template for this subpart has been available on the CEDRI website for six months, whichever date is later, regulated entities shall submit all notifications, reports, and other information required in paragraphs (b) through (j) of this section following the procedure specified in paragraph (l) of this section.

(b) Beginning on January 17, 2027, or once the notification/report template for this subpart has been available on the CEDRI website for six months, whichever date is later, regulated entities shall submit all notifications, reports, and other information required in § 59.511(b) through (j) following the procedure specified in § 59.511(l).

(k) Beginning on January 17, 2027, or once the notification/report template for this subpart has been available on the CEDRI website for six months, whichever date is later, regulated entities shall submit all notifications, reports, and other information required in paragraphs (b) through (j) of this section following the procedure specified in paragraph (l) of this section.

(b) Beginning on January 17, 2027, or once the notification/report template for this subpart has been available on the CEDRI website for six months, whichever date is later, regulated entities shall submit all notifications, reports, and other information required in § 59.511(b) through (j) following the procedure specified in § 59.511(l).

(i) As a regulated entity in accordance with paragraph (a) of this section, you must provide the information requested in paragraphs (i)(1) through (i)(4) of this section every three years beginning in 2011 for reporting year 2010. The report shall be submitted by March 31 of the year following the reporting year to the appropriate Regional Office listed in § 59.512. The first report is due March 31, 2011, for calendar year 2010.

(1) All identification information included in paragraphs (b)(1), (b)(2), and (b)(4) of this section;

(2) For each product category, VOC formulation data for each formulation that was manufactured, imported, or distributed in the reporting year. If a regulated entity can certify that the reporting is being completed by another regulated entity for any product, no second report is required. The formulation data must include the weight fraction (g compound/g product) for each VOC ingredient used in the product in an amount greater than or equal to 0.1 percent. For each VOC ingredient reported, the formulation data must include the information in paragraph (i)(2)(i), (ii), or (iii) of this section.

(i) For compounds listed in table 2A to this subpart, the chemical name, CAS number, and the applicable reactivity factor;

(ii) For the hydrocarbon solvent mixtures listed in either table 2B or 2C to this subpart, the trade name, solvent mixture manufacturer, bin number, and the applicable reactivity factor; or

(iii) For compounds not listed in table 2A to this subpart, the chemical name, CAS number, and the default RF in § 59.505(e).

(3) For each formulation, the total mass of each individual VOC species present in an amount greater than or equal to 0.1 percent of the formulation, that was manufactured, imported, or distributed in the reporting year; and

(i) As a regulated entity in accordance with paragraph (a) of this section, you must provide the information requested in paragraphs (i)(1) through (i)(4) of this section every three years beginning in 2011 for reporting year 2010. The report shall be submitted by March 31 of the year following the reporting year to the appropriate Regional Office listed in § 59.512. The first report is due March 31, 2011, for calendar year 2010.

(1) All identification information included in paragraphs (b)(1), (b)(2), and (b)(4) of this section;

(2) For each product category, VOC formulation data for each formulation that was manufactured, imported, or distributed in the reporting year. If a regulated entity can certify that the reporting is being completed by another regulated entity for any product, no second report is required. The formulation data must include the weight fraction (g compound/g product) for each VOC ingredient used in the product in an amount greater than or equal to 0.1 percent. For each VOC ingredient reported, the formulation data must include the information in paragraph (i)(2)(i), (ii), or (iii) of this section.

(i) For compounds listed in table 2A to this subpart, the chemical name, CAS number, and the applicable reactivity factor;

(ii) For the hydrocarbon solvent mixtures listed in either table 2B or 2C to this subpart, the trade name, solvent mixture manufacturer, bin number, and the applicable reactivity factor; or

(iii) For compounds not listed in table 2A to this subpart, the chemical name, CAS number, and the default RF in § 59.505(e).

(3) For each formulation, the total mass of each individual VOC species present in an amount greater than or equal to 0.1 percent of the formulation, that was manufactured, imported, or distributed in the reporting year; and

(i) As a regulated entity in accordance with paragraph (a) of this section, you must provide the information requested in paragraphs (i)(1) through (i)(4) of this section every three years beginning in 2011 for reporting year 2010. The report shall be submitted by March 31 of the year following the reporting year to the appropriate Regional Office listed in § 59.512. The first report is due March 31, 2011, for calendar year 2010.

(1) All identification information included in paragraphs (b)(1), (b)(2), and (b)(4) of this section;

(2) For each product category, VOC formulation data for each formulation that was manufactured, imported, or distributed in the reporting year. If a regulated entity can certify that the reporting is being completed by another regulated entity for any product, no second report is required. The formulation data must include the weight fraction (g compound/g product) for each VOC ingredient used in the product in an amount greater than or equal to 0.1 percent. For each VOC ingredient reported, the formulation data must include the information in paragraph (i)(2)(i), (ii), or (iii) of this section.

(i) For compounds listed in table 2A to this subpart, the chemical name, CAS number, and the applicable reactivity factor;

(ii) For the hydrocarbon solvent mixtures listed in either table 2B or 2C to this subpart, the trade name, solvent mixture manufacturer, bin number, and the applicable reactivity factor; or

(iii) For compounds not listed in table 2A to this subpart, the chemical name, CAS number, and the default RF in § 59.505(e).

(3) For each formulation, the total mass of each individual VOC species present in an amount greater than or equal to 0.1 percent of the formulation, that was manufactured, imported, or distributed in the reporting year; and

(i) As a regulated entity in accordance with paragraph (a) of this section, you must provide the information requested in paragraphs (i)(1) through (i)(4) of this section every three years beginning in 2011 for reporting year 2010. The report shall be submitted by March 31 of the year following the reporting year to the appropriate Regional Office listed in § 59.512. The first report is due March 31, 2011, for calendar year 2010.

(1) All identification information included in paragraphs (b)(1), (b)(2), and (b)(4) of this section;

(2) For each product category, VOC formulation data for each formulation that was manufactured, imported, or distributed in the reporting year. If a regulated entity can certify that the reporting is being completed by another regulated entity for any product, no second report is required. The formulation data must include the weight fraction (g compound/g product) for each VOC ingredient used in the product in an amount greater than or equal to 0.1 percent. For each VOC ingredient reported, the formulation data must include the information in paragraph (i)(2)(i), (ii), or (iii) of this section.

(i) For compounds listed in table 2A to this subpart, the chemical name, CAS number, and the applicable reactivity factor;

(ii) For the hydrocarbon solvent mixtures listed in either table 2B or 2C to this subpart, the trade name, solvent mixture manufacturer, bin number, and the applicable reactivity factor; or

(iii) For compounds not listed in table 2A to this subpart, the chemical name, CAS number, and the default RF in § 59.505(e).

(3) For each formulation, the total mass of each individual VOC species present in an amount greater than or equal to 0.1 percent of the formulation, that was manufactured, imported, or distributed in the reporting year; and

(k) Beginning on January 17, 2027, or once the notification/report template for this subpart has been available on the CEDRI website for six months, whichever date is later, regulated entities shall submit all notifications, reports, and other information required in paragraphs (b) through (j) of this section following the procedure specified in paragraph (l) of this section.

(b) Beginning on January 17, 2027, or once the notification/report template for this subpart has been available on the CEDRI website for six months, whichever date is later, regulated entities shall submit all notifications, reports, and other information required in § 59.511(b) through (j) following the procedure specified in § 59.511(l).

(g) Beginning on January 17, 2027, or once the notification/report template for this subpart has been available on the CEDRI website for six months, whichever date is later, submit the request for a variance with the information in paragraphs (a)(1) through (6) following the procedure specified in § 59.511(l).

(b) Beginning on January 17, 2027, or once the notification/report template for this subpart has been available on the CEDRI website for six months, whichever date is later, regulated entities shall submit all notifications, reports, and other information required in § 59.511(b) through (j) following the procedure specified in § 59.511(l).

(m) If you are required to electronically submit a report through CEDRI in the EPA's CDX, you may assert a claim of EPA system outage for failure to timely comply with that reporting requirement. To assert a claim of EPA system outage, you must meet the requirements outlined in paragraphs (m)(1) through (7) of this section.

(1) You must have been or will be precluded from accessing CEDRI and submitting a required report within the time prescribed due to an outage of either the EPA's CEDRI or CDX systems.

(2) The outage must have occurred within the period of time beginning five business days prior to the date that the submission is due.

(3) The outage may be planned or unplanned.

(4) You must submit notification to the Administrator in writing as soon as possible following the date you first knew, or through due diligence should have known, that the event may cause or has caused a delay in reporting.

(5) You must provide to the Administrator a written description identifying:

(i) The date(s) and time(s) when CDX or CEDRI was accessed, and the system was unavailable;

(ii) A rationale for attributing the delay in reporting beyond the regulatory deadline to EPA system outage;

(iii) A description of measures taken or to be taken to minimize the delay in reporting; and

(iv) The date by which you propose to report, or if you have already met the reporting requirement at the time of the notification, the date you reported.

(6) The decision to accept the claim of EPA system outage and allow an extension to the reporting deadline is solely within the discretion of the Administrator.

(7) In any circumstance, the report must be submitted electronically as soon as possible after the outage is resolved.

(m) If you are required to electronically submit a report through CEDRI in the EPA's CDX, you may assert a claim of EPA system outage for failure to timely comply with that reporting requirement. To assert a claim of EPA system outage, you must meet the requirements outlined in paragraphs (m)(1) through (7) of this section.

(1) You must have been or will be precluded from accessing CEDRI and submitting a required report within the time prescribed due to an outage of either the EPA's CEDRI or CDX systems.

(2) The outage must have occurred within the period of time beginning five business days prior to the date that the submission is due.

(3) The outage may be planned or unplanned.

(4) You must submit notification to the Administrator in writing as soon as possible following the date you first knew, or through due diligence should have known, that the event may cause or has caused a delay in reporting.

(5) You must provide to the Administrator a written description identifying:

(i) The date(s) and time(s) when CDX or CEDRI was accessed, and the system was unavailable;

(ii) A rationale for attributing the delay in reporting beyond the regulatory deadline to EPA system outage;

(iii) A description of measures taken or to be taken to minimize the delay in reporting; and

(iv) The date by which you propose to report, or if you have already met the reporting requirement at the time of the notification, the date you reported.

(6) The decision to accept the claim of EPA system outage and allow an extension to the reporting deadline is solely within the discretion of the Administrator.

(7) In any circumstance, the report must be submitted electronically as soon as possible after the outage is resolved.

(m) If you are required to electronically submit a report through CEDRI in the EPA's CDX, you may assert a claim of EPA system outage for failure to timely comply with that reporting requirement. To assert a claim of EPA system outage, you must meet the requirements outlined in paragraphs (m)(1) through (7) of this section.

(1) You must have been or will be precluded from accessing CEDRI and submitting a required report within the time prescribed due to an outage of either the EPA's CEDRI or CDX systems.

(2) The outage must have occurred within the period of time beginning five business days prior to the date that the submission is due.

(3) The outage may be planned or unplanned.

(4) You must submit notification to the Administrator in writing as soon as possible following the date you first knew, or through due diligence should have known, that the event may cause or has caused a delay in reporting.

(5) You must provide to the Administrator a written description identifying:

(i) The date(s) and time(s) when CDX or CEDRI was accessed, and the system was unavailable;

(ii) A rationale for attributing the delay in reporting beyond the regulatory deadline to EPA system outage;

(iii) A description of measures taken or to be taken to minimize the delay in reporting; and

(iv) The date by which you propose to report, or if you have already met the reporting requirement at the time of the notification, the date you reported.

(6) The decision to accept the claim of EPA system outage and allow an extension to the reporting deadline is solely within the discretion of the Administrator.

(7) In any circumstance, the report must be submitted electronically as soon as possible after the outage is resolved.

(m) If you are required to electronically submit a report through CEDRI in the EPA's CDX, you may assert a claim of EPA system outage for failure to timely comply with that reporting requirement. To assert a claim of EPA system outage, you must meet the requirements outlined in paragraphs (m)(1) through (7) of this section.

(1) You must have been or will be precluded from accessing CEDRI and submitting a required report within the time prescribed due to an outage of either the EPA's CEDRI or CDX systems.

(2) The outage must have occurred within the period of time beginning five business days prior to the date that the submission is due.

(3) The outage may be planned or unplanned.

(4) You must submit notification to the Administrator in writing as soon as possible following the date you first knew, or through due diligence should have known, that the event may cause or has caused a delay in reporting.

(5) You must provide to the Administrator a written description identifying:

(i) The date(s) and time(s) when CDX or CEDRI was accessed, and the system was unavailable;

(ii) A rationale for attributing the delay in reporting beyond the regulatory deadline to EPA system outage;

(iii) A description of measures taken or to be taken to minimize the delay in reporting; and

(iv) The date by which you propose to report, or if you have already met the reporting requirement at the time of the notification, the date you reported.

(6) The decision to accept the claim of EPA system outage and allow an extension to the reporting deadline is solely within the discretion of the Administrator.

(7) In any circumstance, the report must be submitted electronically as soon as possible after the outage is resolved.

(m) If you are required to electronically submit a report through CEDRI in the EPA's CDX, you may assert a claim of EPA system outage for failure to timely comply with that reporting requirement. To assert a claim of EPA system outage, you must meet the requirements outlined in paragraphs (m)(1) through (7) of this section.

(1) You must have been or will be precluded from accessing CEDRI and submitting a required report within the time prescribed due to an outage of either the EPA's CEDRI or CDX systems.

(2) The outage must have occurred within the period of time beginning five business days prior to the date that the submission is due.

(3) The outage may be planned or unplanned.

(4) You must submit notification to the Administrator in writing as soon as possible following the date you first knew, or through due diligence should have known, that the event may cause or has caused a delay in reporting.

(5) You must provide to the Administrator a written description identifying:

(i) The date(s) and time(s) when CDX or CEDRI was accessed, and the system was unavailable;

(ii) A rationale for attributing the delay in reporting beyond the regulatory deadline to EPA system outage;

(iii) A description of measures taken or to be taken to minimize the delay in reporting; and

(iv) The date by which you propose to report, or if you have already met the reporting requirement at the time of the notification, the date you reported.

(6) The decision to accept the claim of EPA system outage and allow an extension to the reporting deadline is solely within the discretion of the Administrator.

(7) In any circumstance, the report must be submitted electronically as soon as possible after the outage is resolved.

(m) If you are required to electronically submit a report through CEDRI in the EPA's CDX, you may assert a claim of EPA system outage for failure to timely comply with that reporting requirement. To assert a claim of EPA system outage, you must meet the requirements outlined in paragraphs (m)(1) through (7) of this section.

(1) You must have been or will be precluded from accessing CEDRI and submitting a required report within the time prescribed due to an outage of either the EPA's CEDRI or CDX systems.

(2) The outage must have occurred within the period of time beginning five business days prior to the date that the submission is due.

(3) The outage may be planned or unplanned.

(4) You must submit notification to the Administrator in writing as soon as possible following the date you first knew, or through due diligence should have known, that the event may cause or has caused a delay in reporting.

(5) You must provide to the Administrator a written description identifying:

(i) The date(s) and time(s) when CDX or CEDRI was accessed, and the system was unavailable;

(ii) A rationale for attributing the delay in reporting beyond the regulatory deadline to EPA system outage;

(iii) A description of measures taken or to be taken to minimize the delay in reporting; and

(iv) The date by which you propose to report, or if you have already met the reporting requirement at the time of the notification, the date you reported.

(6) The decision to accept the claim of EPA system outage and allow an extension to the reporting deadline is solely within the discretion of the Administrator.

(7) In any circumstance, the report must be submitted electronically as soon as possible after the outage is resolved.

(m) If you are required to electronically submit a report through CEDRI in the EPA's CDX, you may assert a claim of EPA system outage for failure to timely comply with that reporting requirement. To assert a claim of EPA system outage, you must meet the requirements outlined in paragraphs (m)(1) through (7) of this section.

(1) You must have been or will be precluded from accessing CEDRI and submitting a required report within the time prescribed due to an outage of either the EPA's CEDRI or CDX systems.

(2) The outage must have occurred within the period of time beginning five business days prior to the date that the submission is due.

(3) The outage may be planned or unplanned.

(4) You must submit notification to the Administrator in writing as soon as possible following the date you first knew, or through due diligence should have known, that the event may cause or has caused a delay in reporting.

(5) You must provide to the Administrator a written description identifying:

(i) The date(s) and time(s) when CDX or CEDRI was accessed, and the system was unavailable;

(ii) A rationale for attributing the delay in reporting beyond the regulatory deadline to EPA system outage;

(iii) A description of measures taken or to be taken to minimize the delay in reporting; and

(iv) The date by which you propose to report, or if you have already met the reporting requirement at the time of the notification, the date you reported.

(6) The decision to accept the claim of EPA system outage and allow an extension to the reporting deadline is solely within the discretion of the Administrator.

(7) In any circumstance, the report must be submitted electronically as soon as possible after the outage is resolved.

(n) If you are required to electronically submit a report through CEDRI in the EPA's CDX, you may assert a claim of force majeure for failure to timely comply with that reporting requirement. To assert a claim of force majeure, you must meet the requirements outlined in paragraphs (n)(1) through (5) of this section.

(1) You may submit a claim if a force majeure event is about to occur, occurs, or has occurred or there are lingering effects from such an event within the period of time beginning five business days prior to the date the submission is due. For the purposes of this section, a force majeure event is defined as an event that will be or has been caused by circumstances beyond the control of the regulated entity, its contractors, or any entity controlled by the regulated entity that prevents you from complying with the requirement to submit a report electronically within the time period prescribed. Examples of such events are acts of nature (e.g., hurricanes, earthquakes, or floods), acts of war or terrorism, or equipment failure or safety hazard beyond the control of the regulated entity (e.g., large scale power outage).

(2) You must submit notification to the Administrator in writing as soon as possible following the date you first knew, or through due diligence should have known, that the event may cause or has caused a delay in reporting.

(3) You must provide to the Administrator:

(i) A written description of the force majeure event;

(ii) A rationale for attributing the delay in reporting beyond the regulatory deadline to the force majeure event;

(iii) A description of measures taken or to be taken to minimize the delay in reporting; and

(iv) The date by which you propose to report, or if you have already met the reporting requirement at the time of the notification, the date you reported.

(4) The decision to accept the claim of force majeure and allow an extension to the reporting deadline is solely within the discretion of the Administrator.

(5) In any circumstance, the reporting must occur as soon as possible after the force majeure event occurs.

(n) If you are required to electronically submit a report through CEDRI in the EPA's CDX, you may assert a claim of force majeure for failure to timely comply with that reporting requirement. To assert a claim of force majeure, you must meet the requirements outlined in paragraphs (n)(1) through (5) of this section.

(1) You may submit a claim if a force majeure event is about to occur, occurs, or has occurred or there are lingering effects from such an event within the period of time beginning five business days prior to the date the submission is due. For the purposes of this section, a force majeure event is defined as an event that will be or has been caused by circumstances beyond the control of the regulated entity, its contractors, or any entity controlled by the regulated entity that prevents you from complying with the requirement to submit a report electronically within the time period prescribed. Examples of such events are acts of nature (e.g., hurricanes, earthquakes, or floods), acts of war or terrorism, or equipment failure or safety hazard beyond the control of the regulated entity (e.g., large scale power outage).

(2) You must submit notification to the Administrator in writing as soon as possible following the date you first knew, or through due diligence should have known, that the event may cause or has caused a delay in reporting.

(3) You must provide to the Administrator:

(i) A written description of the force majeure event;

(ii) A rationale for attributing the delay in reporting beyond the regulatory deadline to the force majeure event;

(iii) A description of measures taken or to be taken to minimize the delay in reporting; and

(iv) The date by which you propose to report, or if you have already met the reporting requirement at the time of the notification, the date you reported.

(4) The decision to accept the claim of force majeure and allow an extension to the reporting deadline is solely within the discretion of the Administrator.

(5) In any circumstance, the reporting must occur as soon as possible after the force majeure event occurs.

(n) If you are required to electronically submit a report through CEDRI in the EPA's CDX, you may assert a claim of force majeure for failure to timely comply with that reporting requirement. To assert a claim of force majeure, you must meet the requirements outlined in paragraphs (n)(1) through (5) of this section.

(1) You may submit a claim if a force majeure event is about to occur, occurs, or has occurred or there are lingering effects from such an event within the period of time beginning five business days prior to the date the submission is due. For the purposes of this section, a force majeure event is defined as an event that will be or has been caused by circumstances beyond the control of the regulated entity, its contractors, or any entity controlled by the regulated entity that prevents you from complying with the requirement to submit a report electronically within the time period prescribed. Examples of such events are acts of nature (e.g., hurricanes, earthquakes, or floods), acts of war or terrorism, or equipment failure or safety hazard beyond the control of the regulated entity (e.g., large scale power outage).

(2) You must submit notification to the Administrator in writing as soon as possible following the date you first knew, or through due diligence should have known, that the event may cause or has caused a delay in reporting.

(3) You must provide to the Administrator:

(i) A written description of the force majeure event;

(ii) A rationale for attributing the delay in reporting beyond the regulatory deadline to the force majeure event;

(iii) A description of measures taken or to be taken to minimize the delay in reporting; and

(iv) The date by which you propose to report, or if you have already met the reporting requirement at the time of the notification, the date you reported.

(4) The decision to accept the claim of force majeure and allow an extension to the reporting deadline is solely within the discretion of the Administrator.

(5) In any circumstance, the reporting must occur as soon as possible after the force majeure event occurs.

(n) If you are required to electronically submit a report through CEDRI in the EPA's CDX, you may assert a claim of force majeure for failure to timely comply with that reporting requirement. To assert a claim of force majeure, you must meet the requirements outlined in paragraphs (n)(1) through (5) of this section.

(1) You may submit a claim if a force majeure event is about to occur, occurs, or has occurred or there are lingering effects from such an event within the period of time beginning five business days prior to the date the submission is due. For the purposes of this section, a force majeure event is defined as an event that will be or has been caused by circumstances beyond the control of the regulated entity, its contractors, or any entity controlled by the regulated entity that prevents you from complying with the requirement to submit a report electronically within the time period prescribed. Examples of such events are acts of nature (e.g., hurricanes, earthquakes, or floods), acts of war or terrorism, or equipment failure or safety hazard beyond the control of the regulated entity (e.g., large scale power outage).

(2) You must submit notification to the Administrator in writing as soon as possible following the date you first knew, or through due diligence should have known, that the event may cause or has caused a delay in reporting.

(3) You must provide to the Administrator:

(i) A written description of the force majeure event;

(ii) A rationale for attributing the delay in reporting beyond the regulatory deadline to the force majeure event;

(iii) A description of measures taken or to be taken to minimize the delay in reporting; and

(iv) The date by which you propose to report, or if you have already met the reporting requirement at the time of the notification, the date you reported.

(4) The decision to accept the claim of force majeure and allow an extension to the reporting deadline is solely within the discretion of the Administrator.

(5) In any circumstance, the reporting must occur as soon as possible after the force majeure event occurs.

(n) If you are required to electronically submit a report through CEDRI in the EPA's CDX, you may assert a claim of force majeure for failure to timely comply with that reporting requirement. To assert a claim of force majeure, you must meet the requirements outlined in paragraphs (n)(1) through (5) of this section.

(1) You may submit a claim if a force majeure event is about to occur, occurs, or has occurred or there are lingering effects from such an event within the period of time beginning five business days prior to the date the submission is due. For the purposes of this section, a force majeure event is defined as an event that will be or has been caused by circumstances beyond the control of the regulated entity, its contractors, or any entity controlled by the regulated entity that prevents you from complying with the requirement to submit a report electronically within the time period prescribed. Examples of such events are acts of nature (e.g., hurricanes, earthquakes, or floods), acts of war or terrorism, or equipment failure or safety hazard beyond the control of the regulated entity (e.g., large scale power outage).

(2) You must submit notification to the Administrator in writing as soon as possible following the date you first knew, or through due diligence should have known, that the event may cause or has caused a delay in reporting.

(3) You must provide to the Administrator:

(i) A written description of the force majeure event;

(ii) A rationale for attributing the delay in reporting beyond the regulatory deadline to the force majeure event;

(iii) A description of measures taken or to be taken to minimize the delay in reporting; and

(iv) The date by which you propose to report, or if you have already met the reporting requirement at the time of the notification, the date you reported.

(4) The decision to accept the claim of force majeure and allow an extension to the reporting deadline is solely within the discretion of the Administrator.

(5) In any circumstance, the reporting must occur as soon as possible after the force majeure event occurs.