§59.503. What definitions apply to this subpart? — Inbound Citations

(a) The regulated entities for an aerosol coating product are the manufacturer or importer of an aerosol coating product and a distributor of an aerosol coating product if it is named on the label or if it specifies the formulation of the product. Distributors include retailers who fall within the definition of “distributor” in § 59.503.

(a) If you manufacture multi-component kits as defined in § 59.503, then the Kit PWR must not exceed the Total Reactivity Limit.

(1) The aerosol coating category code for the coating, based on the category definitions in § 59.503. This code can be the default category code shown in Table 1 of this subpart or a company-specific code, if that code is explained as required by § 59.511(a);

(2) You are required to maintain records of the following at the location specified in § 59.511(b)(4) for each product subject to the PWR limits in Table 1 of this subpart: The product category, all product calculations, the PWR, and the weight fraction of all ingredients including: Water, total solids, each VOC, and any other compounds assigned a RF of zero as specified in § 59.505. Solids do not have to be listed individually in these records. If an individual VOC is present in an amount less than 0.1 percent by weight, then it does not need to be reported as an ingredient. An impurity that meets the definition provided in § 59.503 does not have to be reported as an ingredient. For each batch of each product subject to the PWR limits, you must maintain records of the date the batch was manufactured, the volume of the batch, the recipe used for formulating the batch, and the number of cans manufactured in each batch and each formulation.

(4) The product category as defined in § 59.503;