§466.22. Effluent limitation representing the degree of effluent reduction attainable by the application of the best available technology economically achievable.
40 C.F.R. § 466.22
Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable.
There shall be no discharge of process wastewater pollutants from metal preparation operations.
The discharge of process wastewater pollutants from all porcelain enameling coating operations shall not exceed the values set forth below:
Notes, amendments, and revision history
Amendments
[47 FR 53184, Nov. 24, 1982, as amended at 50 FR 36543, Sept. 6, 1985]
Authority
Authority: Secs. 301, 304 (b), (c), (e), and (g), 306 (b) and (c), 307 and 501 of the Clean Water Act (the Federal Water Pollution Control Act Amendments of 1972, as amended by the Clean Water Act of 1977) (the “Act”); 33 U.S.C. 1311, 1314 (b), (c), (e) and (g), 1316 (b) and (c), 1317 (b) and (c), and 1361; 86 Stat. 816, Pub. L. 92-500; 91 Stat. 1567, Pub. L. 95-217.
Source
Source: 47 FR 53184, Nov. 24, 1982, unless otherwise noted.
Amendments
[47 FR 53184, Nov. 24, 1982, as amended at 50 FR 36543, Sept. 6, 1985]