§433.16. New source performance standards (NSPS).
40 C.F.R. § 433.16
Any new source subject to this subpart must achieve the following performance standards:
Alternatively, for industrial facilities with cyanide treatment, and upon agreement between a source subject to those limits and the pollution control authority, the following amenable cyanide limit may apply in place of the total cyanide limit specified in paragraph (a) of this section:
No user subject to the provisions of this subpart shall augment the use of process wastewater or otherwise dilute the wastewater as a partial or total substitute for adequate treatment to achieve compliance with this limitation.
Notes, amendments, and revision history
Amendments
[48 FR 32485, July 15, 1983; 48 FR 43682, Sept. 26, 1983]
Authority
Authority: Secs. 301, 304(b), (c), (e), and (g), 306(b) and (c), 307(b) and (c), 308 and 501 of the Clean Water Act (the Federal Water Pollution Control Act Amendments of 1971, as amended by the Clean Water Act of 1977) (the “Act”); 33 U.S.C. 1311, 1314(b) (c), (e), and (g), 1316(b) and (c), 1317(b) and (c), 1318 and 1361; 86 Stat. 816, Pub. L. 92-500; 91 Stat. 1567, Pub. L. 95-217.
Source
Source: 48 FR 32485, July 15, 1983, unless otherwise noted.
Amendments
[48 FR 32485, July 15, 1983; 48 FR 43682, Sept. 26, 1983]