§421.216. Pretreatment standards for new sources.
40 C.F.R. § 421.216
Except as provided in 40 CFR 403.7, any new source subject to this subpart which introduces pollutants into a publicly owned treatment works must comply with 40 CFR part 403 and achieve the following pretreatment standards for new sources. The mass of wastewater pollutants in primary molybdenum and rhenium process wastewater introduced into a POTW shall not exceed the following values:
Molybdenum sulfide leachate.
Roaster SO<I>2</I> scrubber.
Molybdic oxide leachate.
Hydrogen reduction furnace scrubber.
Depleted rhenium scrubbing solution.
Notes, amendments, and revision history
Amendments
[50 FR 38355, Sept. 20, 1985, as amended at 55 FR 31702, 31703, Aug. 3, 1990]
Source
Source: 50 FR 38355, Sept. 20, 1985, unless otherwise noted.
Authority
Authority: Secs. 301, 304 (b), (c), (e), and (g), 306 (b) and (c), 307 (b) and (c), 308 and 501 of the Clean Water Act (the Federal Water Pollution Control Act Amendments of 1972, as amended by the Clean Water Act of 1977) and the Water Quality Act of 1987 (the “Act”); 33 U.S.C. 1311, 1314 (b), (c), (e), and (g), 1316 (b) and (c), 1317 (b) and (c), 1318 and 1361; 86 Stat. 816, Pub. L. 92-500; 91 Stat. 1567, Pub. L. 95-217; 101 Stat. 7, Pub. L. 100-4.
Source
Source: 49 FR 8790, Mar. 8, 1984, unless otherwise noted.
Amendments
[50 FR 38355, Sept. 20, 1985, as amended at 55 FR 31702, 31703, Aug. 3, 1990]