§420.77. Effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional technology (BCT).
40 C.F.R. § 420.77
Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional technology.
Primary mills, carbon and specialty—
Without scarfing.
With scarfing.
Section mills—
Carbon.
Specialty.
Flat mills—
Hot strip and sheet mills, carbon and specialty.
Carbon plate mills.
Specialty plate mills.
Pipe and tube mills, carbon and specialty.
Notes, amendments, and revision history
Amendments
[47 FR 23284, May 27, 1982, as amended at 47 FR 41739, Sept. 22, 1982]
Authority
Authority: 33 U.S.C. 1311, 1314, 1316, 1317, 1318, 1342, and 1361.
Source
Source: 47 FR 23284, May 27, 1982, unless otherwise noted.
Amendments
[47 FR 23284, May 27, 1982, as amended at 47 FR 41739, Sept. 22, 1982]