§265.229. Special requirements for ignitable or reactive waste.
40 C.F.R. § 265.229
Ignitable or reactive waste must not be placed in a surface impoundment, unless the waste and impoundment satisfy all applicable requirements of 40 CFR part 268, and:
The waste is treated, rendered, or mixed before or immediately after placement in the impoundment so that:
The resulting waste, mixture, or dissolution of material no longer meets the definition of ignitable or reactive waste under § 261.21 or § 261.23 of this chapter; and
Section 265.17(b) is complied with; or
The waste is managed in such a way that it is protected from any material or conditions which may cause it to ignite or react; and
The owner or operator obtains a certification from a qualified chemist or engineer that, to the best of his knowledge and opinion, the design features or operating plans of the facility will prevent ignition or reaction; and
The certification and the basis for it are maintained at the facility; or
The surface impoundment is used solely for emergencies.
Notes, amendments, and revision history
Amendments
[50 FR 16048, Apr. 23, 1985, as amended at 55 FR 22685, June 1, 1990; 71 FR 40275, July 14, 2006]
Authority
Authority: 42 U.S.C. 6905, 6906, 6912, 6922, 6923, 6924, 6925, 6935, 6936, 6937, and 6939g.
Source
Source: 45 FR 33232, May 19, 1980, unless otherwise noted.
Amendments
[50 FR 16048, Apr. 23, 1985, as amended at 55 FR 22685, June 1, 1990; 71 FR 40275, July 14, 2006]