§264.314. Special requirements for bulk and containerized liquids.
40 C.F.R. § 264.314
The placement of bulk or non-containerized liquid hazardous waste or hazardous waste containing free liquids (whether or not sorbents have been added) in any landfill is prohibited.
To demonstrate the absence or presence of free liquids in either a containerized or a bulk waste, the following test must be used: Method 9095B (Paint Filter Liquids Test) as described in “Test Methods for Evaluating Solid Waste, Physical/Chemical Methods,” EPA Publication SW-846, as incorporated by reference in § 260.11 of this chapter.
Containers holding free liquids must not be placed in a landfill unless:
All free-standing liquid—
Has been removed by decanting, or other methods;
Has been mixed with sorbent or solidified so that free-standing liquid is no longer observed; or
Has been otherwise eliminated; or
The container is very small, such as an ampule; or
The container is designed to hold free liquids for use other than storage, such as a battery or capacitor; or
The container is a lab pack as defined in § 264.316 and is disposed of in accordance with § 264.316.
Sorbents used to treat free liquids to be disposed of in landfills must be nonbiodegradable. Nonbiodegradable sorbents are: materials listed or described in paragraph (d)(1) of this section; materials that pass one of the tests in paragraph (d)(2) of this section; or materials that are determined by EPA to be nonbiodegradable through the part 260 petition process.
Nonbiodegradable sorbents.
Inorganic minerals, other inorganic materials, and elemental carbon (e.g., aluminosilicates, clays, smectites, Fuller's earth, bentonite, calcium bentonite, montmorillonite, calcined montmorillonite, kaolinite, micas (illite), vermiculites, zeolites; calcium carbonate (organic free limestone); oxides/hydroxides, alumina, lime, silica (sand), diatomaceous earth; perlite (volcanic glass); expanded volcanic rock; volcanic ash; cement kiln dust; fly ash; rice hull ash; activated charcoal/activated carbon); or
High molecular weight synthetic polymers (e.g., polyethylene, high density polyethylene (HDPE), polypropylene, polystyrene, polyurethane, polyacrylate, polynorborene, polyisobutylene, ground synthetic rubber, cross-linked allylstyrene and tertiary butyl copolymers). This does not include polymers derived from biological material or polymers specifically designed to be degradable; or
Mixtures of these nonbiodegradable materials.
Tests for nonbiodegradable sorbents.
The sorbent material is determined to be nonbiodegradable under ASTM Method G21-70 (1984a)— Standard Practice for Determining Resistance of Synthetic Polymer Materials to Fungi; or
The sorbent material is determined to be nonbiodegradable under ASTM Method G22-76 (1984b)— Standard Practice for Determining Resistance of Plastics to Bacteria; or
The sorbent material is determined to be non-biodegradable under OECD test 301B— [CO2 Evolution (Modified Sturm Test)].
The placement of any liquid which is not a hazardous waste in a landfill is prohibited unless the owner or operator of such landfill demonstrates to the Regional Administrator, or the Regional Administrator determines that:
The only reasonably available alternative to the placement in such landfill is placement in a landfill or unlined surface impoundment, whether or not permitted or operating under interim status, which contains, or may reasonably be anticipated to contain, hazardous waste; and
Placement in such owner or operator's landfill will not present a risk of contamination of any “underground source of drinking water” (as that term is defined in 40 CFR 270.2.)
Notes, amendments, and revision history
Amendments
[47 FR 32365, July 26, 1982, as amended at 50 FR 18374, Apr. 30, 1985; 50 FR 28748, July 15, 1985; 57 FR 54460, Nov. 18, 1992; 58 FR 46050, Aug. 31, 1993; 60 FR 35705, July 11, 1995; 70 FR 34581, June 14, 2005; 71 FR 16906, Apr. 4, 2006; 71 FR 40273, July 14, 2006; 75 FR 13006, Mar. 18, 2010]
Source
Source: 47 FR 32365, July 26, 1982, unless otherwise noted.
Authority
Authority: 42 U.S.C. 6905, 6912(a), 6924, 6925, and 6939g.
Source
Source: 45 FR 33221, May 19, 1980, unless otherwise noted.
Amendments
[47 FR 32365, July 26, 1982, as amended at 50 FR 18374, Apr. 30, 1985; 50 FR 28748, July 15, 1985; 57 FR 54460, Nov. 18, 1992; 58 FR 46050, Aug. 31, 1993; 60 FR 35705, July 11, 1995; 70 FR 34581, June 14, 2005; 71 FR 16906, Apr. 4, 2006; 71 FR 40273, July 14, 2006; 75 FR 13006, Mar. 18, 2010]