§262.83. Exports of hazardous waste. — Inbound Citations

(1) After June 26, 2018, no claim of business confidentiality may be asserted by any person with respect to information contained in cathode ray tube export documents prepared, used and submitted under §§ 261.39(a)(5) and 261.41(a) of this chapter, and with respect to information contained in hazardous waste export, import, and transit documents prepared, used and submitted under §§ 262.82, 262.83, 262.84, 263.20, 264.12, 264.71, 265.12, 265.71, and 267.71 of this chapter, whether submitted electronically into EPA's Waste Import Export Tracking System or in paper format. After January 22, 2025, no claim of business confidentiality may be asserted by any person with respect to information contained in hazardous secondary material export documents prepared, used and submitted under § 261.4(a)(25) of this chapter, whether submitted electronically into the EPA's Waste Import Export Tracking System or in paper format.

(3) Be designed and operated to capture and transport all the purged process fluid to a material management unit that complies with the applicable requirements of §§ 261.1084 through 264.1086 of this subpart or a control device that complies with the requirements of § 261.1060 of this subpart.

(A) The person initiating a shipment for reclamation in a foreign country, and any intermediary arranging for the shipment, must comply with the requirements applicable to an exporter in § 262.83 of this chapter with the exception of § 262.83(c);

(A) For exports, the exporter must comply with § 262.83.

(7) Export of hazardous wastes for recycling or disposal operations that were originally imported into the United States for recycling or disposal operations in a third country is prohibited unless an exporter in the United States complies with the export requirements in § 262.83, including providing notification to EPA in accordance with paragraph (b)(1) of this section. In addition to listing all required information in paragraphs (b)(1)(i) through (b)(1)(xiii) of this section, the exporter must provide the original consent number issued for the initial import of the wastes in the notification, and receive an AOC from EPA documenting the consent of the competent authorities in new country of import, the original country of export, and any transit countries prior to re-export.

(2) For exports of hazardous waste subject to the requirements of 40 CFR part 262, subpart H a transporter may not accept hazardous waste without a manifest signed by the generator in accordance with this section, as appropriate, and a movement document that includes all information required by § 262.83 of this chapter.

(1) Guidance Manual for the Control of Transboundary Movements of Recoverable Wastes, copyright 2009, Annex B: OECD Consolidated List of Wastes Subject to the Green Control Procedure and Annex C: OECD Consolidated List of Wastes Subject to the Amber Control Procedure, IBR approved for §§ 262.82(a), 262.83(b), (d), and (g), and 262.84(b) and (d).

(2) If the recovery facility is located in an OECD member country and has been pre-consented by the competent authority of the OECD member country to recover the waste sent by exporters located in other OECD member countries, the notification may cover up to three years of shipments. Notifications proposing export to a pre-consented facility in an OECD member country must include all information listed in paragraphs (b)(1)(i) through (b)(1)(xiii) of this section and additionally state that the facility is pre-consented. Exporters must submit the notification to EPA using the allowable methods listed in paragraph (b)(1) of this section at least ten days before the first shipment is expected to leave the United States.

(2) If the recovery facility is located in an OECD member country and has been pre-consented by the competent authority of the OECD member country to recover the waste sent by exporters located in other OECD member countries, the notification may cover up to three years of shipments. Notifications proposing export to a pre-consented facility in an OECD member country must include all information listed in paragraphs (b)(1)(i) through (b)(1)(xiii) of this section and additionally state that the facility is pre-consented. Exporters must submit the notification to EPA using the allowable methods listed in paragraph (b)(1) of this section at least ten days before the first shipment is expected to leave the United States.

(2) If the recovery facility is located in an OECD member country and has been pre-consented by the competent authority of the OECD member country to recover the waste sent by exporters located in other OECD member countries, the notification may cover up to three years of shipments. Notifications proposing export to a pre-consented facility in an OECD member country must include all information listed in paragraphs (b)(1)(i) through (b)(1)(xiii) of this section and additionally state that the facility is pre-consented. Exporters must submit the notification to EPA using the allowable methods listed in paragraph (b)(1) of this section at least ten days before the first shipment is expected to leave the United States.

(2) If the recovery facility is located in an OECD member country and has been pre-consented by the competent authority of the OECD member country to recover the waste sent by exporters located in other OECD member countries, the notification may cover up to three years of shipments. Notifications proposing export to a pre-consented facility in an OECD member country must include all information listed in paragraphs (b)(1)(i) through (b)(1)(xiii) of this section and additionally state that the facility is pre-consented. Exporters must submit the notification to EPA using the allowable methods listed in paragraph (b)(1) of this section at least ten days before the first shipment is expected to leave the United States.

(2) If the recovery facility is located in an OECD member country and has been pre-consented by the competent authority of the OECD member country to recover the waste sent by exporters located in other OECD member countries, the notification may cover up to three years of shipments. Notifications proposing export to a pre-consented facility in an OECD member country must include all information listed in paragraphs (b)(1)(i) through (b)(1)(xiii) of this section and additionally state that the facility is pre-consented. Exporters must submit the notification to EPA using the allowable methods listed in paragraph (b)(1) of this section at least ten days before the first shipment is expected to leave the United States.

(2) If the recovery facility is located in an OECD member country and has been pre-consented by the competent authority of the OECD member country to recover the waste sent by exporters located in other OECD member countries, the notification may cover up to three years of shipments. Notifications proposing export to a pre-consented facility in an OECD member country must include all information listed in paragraphs (b)(1)(i) through (b)(1)(xiii) of this section and additionally state that the facility is pre-consented. Exporters must submit the notification to EPA using the allowable methods listed in paragraph (b)(1) of this section at least ten days before the first shipment is expected to leave the United States.

(2) If the recovery facility is located in an OECD member country and has been pre-consented by the competent authority of the OECD member country to recover the waste sent by exporters located in other OECD member countries, the notification may cover up to three years of shipments. Notifications proposing export to a pre-consented facility in an OECD member country must include all information listed in paragraphs (b)(1)(i) through (b)(1)(xiii) of this section and additionally state that the facility is pre-consented. Exporters must submit the notification to EPA using the allowable methods listed in paragraph (b)(1) of this section at least ten days before the first shipment is expected to leave the United States.

(2) If the recovery facility is located in an OECD member country and has been pre-consented by the competent authority of the OECD member country to recover the waste sent by exporters located in other OECD member countries, the notification may cover up to three years of shipments. Notifications proposing export to a pre-consented facility in an OECD member country must include all information listed in paragraphs (b)(1)(i) through (b)(1)(xiii) of this section and additionally state that the facility is pre-consented. Exporters must submit the notification to EPA using the allowable methods listed in paragraph (b)(1) of this section at least ten days before the first shipment is expected to leave the United States.

(2) If the recovery facility is located in an OECD member country and has been pre-consented by the competent authority of the OECD member country to recover the waste sent by exporters located in other OECD member countries, the notification may cover up to three years of shipments. Notifications proposing export to a pre-consented facility in an OECD member country must include all information listed in paragraphs (b)(1)(i) through (b)(1)(xiii) of this section and additionally state that the facility is pre-consented. Exporters must submit the notification to EPA using the allowable methods listed in paragraph (b)(1) of this section at least ten days before the first shipment is expected to leave the United States.

(2) If the recovery facility is located in an OECD member country and has been pre-consented by the competent authority of the OECD member country to recover the waste sent by exporters located in other OECD member countries, the notification may cover up to three years of shipments. Notifications proposing export to a pre-consented facility in an OECD member country must include all information listed in paragraphs (b)(1)(i) through (b)(1)(xiii) of this section and additionally state that the facility is pre-consented. Exporters must submit the notification to EPA using the allowable methods listed in paragraph (b)(1) of this section at least ten days before the first shipment is expected to leave the United States.

(2) If the recovery facility is located in an OECD member country and has been pre-consented by the competent authority of the OECD member country to recover the waste sent by exporters located in other OECD member countries, the notification may cover up to three years of shipments. Notifications proposing export to a pre-consented facility in an OECD member country must include all information listed in paragraphs (b)(1)(i) through (b)(1)(xiii) of this section and additionally state that the facility is pre-consented. Exporters must submit the notification to EPA using the allowable methods listed in paragraph (b)(1) of this section at least ten days before the first shipment is expected to leave the United States.

(2) If the recovery facility is located in an OECD member country and has been pre-consented by the competent authority of the OECD member country to recover the waste sent by exporters located in other OECD member countries, the notification may cover up to three years of shipments. Notifications proposing export to a pre-consented facility in an OECD member country must include all information listed in paragraphs (b)(1)(i) through (b)(1)(xiii) of this section and additionally state that the facility is pre-consented. Exporters must submit the notification to EPA using the allowable methods listed in paragraph (b)(1) of this section at least ten days before the first shipment is expected to leave the United States.

(2) If the recovery facility is located in an OECD member country and has been pre-consented by the competent authority of the OECD member country to recover the waste sent by exporters located in other OECD member countries, the notification may cover up to three years of shipments. Notifications proposing export to a pre-consented facility in an OECD member country must include all information listed in paragraphs (b)(1)(i) through (b)(1)(xiii) of this section and additionally state that the facility is pre-consented. Exporters must submit the notification to EPA using the allowable methods listed in paragraph (b)(1) of this section at least ten days before the first shipment is expected to leave the United States.

(6) Export of hazardous wastes that were originally imported into the United States for recycling or disposal operations is prohibited unless an exporter in the United States complies with the export requirements in § 262.83(b)(7).

(A) The person initiating a shipment for reclamation in a foreign country, and any intermediary arranging for the shipment, must comply with the requirements applicable to an exporter in § 262.83 of this chapter with the exception of § 262.83(c);

(d) A healthcare facility or reverse distributor that sends potentially creditable hazardous waste pharmaceuticals to a foreign destination must comply with the applicable sections of 40 CFR part 262 subpart H, except the manifesting requirement of § 262.83(c), in addition to paragraphs (a) through (c) of this section.

(1) Guidance Manual for the Control of Transboundary Movements of Recoverable Wastes, copyright 2009, Annex B: OECD Consolidated List of Wastes Subject to the Green Control Procedure and Annex C: OECD Consolidated List of Wastes Subject to the Amber Control Procedure, IBR approved for §§ 262.82(a), 262.83(b), (d), and (g), and 262.84(b) and (d).

(17) DC2 Testing of a new technology to dispose of a hazardous waste (for transboundary movements with Canada only).

EPA Acknowledgment of Consent (AOC) means the letter EPA sends to the exporter documenting the specific terms of the country of import's consent and the country(ies) of transit's consent(s). The AOC meets the definition of an export license in U.S. Census Bureau regulations 15 CFR 30.1.

Export means the transportation of hazardous waste from a location under the jurisdiction of the United States to a location under the jurisdiction of another country, or a location not under the jurisdiction of any country, for the purposes of recovery or disposal operations therein.

Exporter, also known as primary exporter on the RCRA hazardous waste manifest, means the person domiciled in the United States who is required to originate the movement document in accordance with § 262.83(d) or the manifest for a shipment of hazardous waste in accordance with subpart B of this part, or equivalent State provision, which specifies a foreign receiving facility as the facility to which the hazardous wastes will be sent, or any recognized trader who proposes export of the hazardous wastes for recovery or disposal operations in the country of import.

Foreign exporter means the person under the jurisdiction of the country of export who has, or will have at the time the planned transboundary movement commences, possession or other forms of legal control of the hazardous wastes and who proposes shipment of the hazardous wastes to the United States for recovery or disposal operations.

Foreign importer means the person to whom possession or other form of legal control of the hazardous waste is assigned at the time the exported hazardous waste is received in the country of import.

Foreign receiving facility means a facility which, under the importing country's applicable domestic law, is operating or is authorized to operate in the country of import to receive the hazardous wastes and to perform recovery or disposal operations on them.

Import means the transportation of hazardous waste from a location under the jurisdiction of another country to a location under the jurisdiction of the United States for the purposes of recovery or disposal operations therein.

Importer means the person to whom possession or other form of legal control of the hazardous waste is assigned at the time the imported hazardous waste is received in the United States.

OECD area means all land or marine areas under the national jurisdiction of any OECD Member country. When the regulations refer to shipments to or from an OECD Member country, this means OECD area.

OECD means the Organization for Economic Cooperation and Development.

OECD Member country means the countries that are members of the OECD and participate in the Amended 2001 OECD Decision. (EPA provides a list of OECD Member countries at https://www.epa.gov/hwgenerators/international-agreements-transboundary-shipments-waste).

Receiving facility means a U.S. facility which, under RCRA and other applicable domestic laws, is operating or is authorized to operate to receive hazardous wastes and to perform recovery or disposal operations on them.

Recovery operations means activities leading to resource recovery, recycling, reclamation, direct re-use or alternative uses, which include:

(d) A transporter of hazardous waste that is being imported from or exported to any other country for purposes of recovery or disposal is subject to this Subpart and to all other relevant requirements of subpart H of 40 CFR part 262, including, but not limited to, 40 CFR 262.83(d) and 262.84(d) for movement documents.

(c) The transporter must ensure that the manifest accompanies the hazardous waste. For exports, the transporter must ensure that a movement document that includes all information required by § 262.83(d) of this chapter also accompanies the hazardous waste. For imports, the transporter must ensure that a movement document that includes all information required by § 262.84(d) of this chapter also accompanies the hazardous waste.

(2) The movement document must include the following paragraphs (d)(2)(i) through (xv) of this section:

(i) The corresponding consent number(s) and hazardous waste number(s) for the listed hazardous waste from the relevant EPA AOC(s) and if required to be accompanied by a RCRA Uniform Hazardous Waste Manifest within the United States, the manifest tracking number from block 4;

(ii) The shipment number and the total number of shipments from the EPA AOC or the movement tracking number;

(iii) Exporter name and EPA identification number, site address, telephone, fax numbers, and email address;

(iv) Foreign receiving facility name, site address, telephone, fax numbers, email address, technologies employed, and the applicable recovery or disposal operations as defined in § 262.81;

(v) Foreign importer name (if not the owner or operator of the foreign receiving facility), site address, telephone, fax numbers, and email address;

(vi) Description(s) of each hazardous waste, quantity of each hazardous waste in the shipment, applicable RCRA hazardous waste code(s) for each hazardous waste, applicable OECD waste code for each hazardous waste from the lists incorporated by reference in 40 CFR 260.11, and the United Nations/U.S. Department of Transportation (DOT) ID number for each hazardous waste;

(vii) Date movement commenced;

(viii) Name (if not exporter), site address, telephone, fax numbers, and email of company originating the shipment;

(ix) Company name, EPA ID number, site address, telephone, fax numbers, and email address of all transporters;

(x) Identification (license, registered name or registration number) of means of transport, including types of packaging;

(xi) Any special precautions to be taken by transporter(s);

(xii) Certification/declaration signed and dated by the exporter that the information in the movement document is complete and correct;

(xiii) Appropriate signatures for each custody transfer (e.g., transporter, importer, and owner or operator of the foreign receiving facility);

(xiv) Each U.S. person that has physical custody of the hazardous waste from the time the movement commences until it arrives at the foreign receiving facility must sign the movement document (e.g., transporter, foreign importer, and owner or operator of the foreign receiving facility); and

(xv) As part of the contract requirements per paragraph (f) of this section, the exporter must require that the foreign receiving facility send a copy of the signed movement document to confirm receipt within three working days of shipment delivery to the exporter, and to the competent authorities of the countries of import and transit that control the shipment as an import and transit of hazardous waste respectively. For shipments occurring on or after the electronic import-export reporting compliance date, the exporter must:

(A) Initiate the movement document using the allowable methods listed in paragraph (b)(1) of this section; and

(B) Close out the movement document within three working days of receiving a copy of the signed movement document sent from the foreign receiving facility to confirm receipt using the allowable methods listed in paragraph (b)(1) of this section;

(xvi) As part of the contract requirements per paragraph (f) of this section, the exporter must require that the foreign receiving facility send a copy of the confirmation of recovery or disposal, as soon as possible, but no later than thirty days after completing recovery or disposal on the waste in the shipment and no later than one calendar year following receipt of the waste, to the exporter and to the competent authority of the country of import. If the movement includes shipment to a foreign interim receiving facility, the exporter must additionally require that the interim receiving facility promptly send copies of the confirmation of recovery or disposal that it receives from the final recovery or disposal facility within one year of shipment delivery to the final recovery or disposal facility that performed one of recovery operations R1 through R11, or RC1, or one of disposal operations D1 through D12, DC1 or DC2 as defined in § 262.81 to the competent authority of the country of import and to the exporter. For shipments occurring on or after the electronic import-export reporting compliance date, the exporter must submit each confirmation of recovery or disposal to the EPA within three working days of receiving the confirmation of recovery or disposal from the foreign receiving facility using the allowable methods listed in paragraph (b)(1) of this section; and

(xvii) For shipments sent to a country with which the EPA has established an electronic exchange of movement document tracking data, foreign receiving facility transmittal to the exporter of the confirmation of receipt and the confirmation of recovery or disposal may be sent via the electronic exchange.

(2) The movement document must include the following paragraphs (d)(2)(i) through (xv) of this section:

(i) The corresponding consent number(s) and hazardous waste number(s) for the listed hazardous waste from the relevant EPA AOC(s) and if required to be accompanied by a RCRA Uniform Hazardous Waste Manifest within the United States, the manifest tracking number from block 4;

(ii) The shipment number and the total number of shipments from the EPA AOC or the movement tracking number;

(iii) Exporter name and EPA identification number, site address, telephone, fax numbers, and email address;

(iv) Foreign receiving facility name, site address, telephone, fax numbers, email address, technologies employed, and the applicable recovery or disposal operations as defined in § 262.81;

(v) Foreign importer name (if not the owner or operator of the foreign receiving facility), site address, telephone, fax numbers, and email address;

(vi) Description(s) of each hazardous waste, quantity of each hazardous waste in the shipment, applicable RCRA hazardous waste code(s) for each hazardous waste, applicable OECD waste code for each hazardous waste from the lists incorporated by reference in 40 CFR 260.11, and the United Nations/U.S. Department of Transportation (DOT) ID number for each hazardous waste;

(vii) Date movement commenced;

(viii) Name (if not exporter), site address, telephone, fax numbers, and email of company originating the shipment;

(ix) Company name, EPA ID number, site address, telephone, fax numbers, and email address of all transporters;

(x) Identification (license, registered name or registration number) of means of transport, including types of packaging;

(xi) Any special precautions to be taken by transporter(s);

(xii) Certification/declaration signed and dated by the exporter that the information in the movement document is complete and correct;

(xiii) Appropriate signatures for each custody transfer (e.g., transporter, importer, and owner or operator of the foreign receiving facility);

(xiv) Each U.S. person that has physical custody of the hazardous waste from the time the movement commences until it arrives at the foreign receiving facility must sign the movement document (e.g., transporter, foreign importer, and owner or operator of the foreign receiving facility); and

(xv) As part of the contract requirements per paragraph (f) of this section, the exporter must require that the foreign receiving facility send a copy of the signed movement document to confirm receipt within three working days of shipment delivery to the exporter, and to the competent authorities of the countries of import and transit that control the shipment as an import and transit of hazardous waste respectively. For shipments occurring on or after the electronic import-export reporting compliance date, the exporter must:

(A) Initiate the movement document using the allowable methods listed in paragraph (b)(1) of this section; and

(B) Close out the movement document within three working days of receiving a copy of the signed movement document sent from the foreign receiving facility to confirm receipt using the allowable methods listed in paragraph (b)(1) of this section;

(xvi) As part of the contract requirements per paragraph (f) of this section, the exporter must require that the foreign receiving facility send a copy of the confirmation of recovery or disposal, as soon as possible, but no later than thirty days after completing recovery or disposal on the waste in the shipment and no later than one calendar year following receipt of the waste, to the exporter and to the competent authority of the country of import. If the movement includes shipment to a foreign interim receiving facility, the exporter must additionally require that the interim receiving facility promptly send copies of the confirmation of recovery or disposal that it receives from the final recovery or disposal facility within one year of shipment delivery to the final recovery or disposal facility that performed one of recovery operations R1 through R11, or RC1, or one of disposal operations D1 through D12, DC1 or DC2 as defined in § 262.81 to the competent authority of the country of import and to the exporter. For shipments occurring on or after the electronic import-export reporting compliance date, the exporter must submit each confirmation of recovery or disposal to the EPA within three working days of receiving the confirmation of recovery or disposal from the foreign receiving facility using the allowable methods listed in paragraph (b)(1) of this section; and

(xvii) For shipments sent to a country with which the EPA has established an electronic exchange of movement document tracking data, foreign receiving facility transmittal to the exporter of the confirmation of receipt and the confirmation of recovery or disposal may be sent via the electronic exchange.

(2) The movement document must include the following paragraphs (d)(2)(i) through (xv) of this section:

(i) The corresponding consent number(s) and hazardous waste number(s) for the listed hazardous waste from the relevant EPA AOC(s) and if required to be accompanied by a RCRA Uniform Hazardous Waste Manifest within the United States, the manifest tracking number from block 4;

(ii) The shipment number and the total number of shipments from the EPA AOC or the movement tracking number;

(iii) Exporter name and EPA identification number, site address, telephone, fax numbers, and email address;

(iv) Foreign receiving facility name, site address, telephone, fax numbers, email address, technologies employed, and the applicable recovery or disposal operations as defined in § 262.81;

(v) Foreign importer name (if not the owner or operator of the foreign receiving facility), site address, telephone, fax numbers, and email address;

(vi) Description(s) of each hazardous waste, quantity of each hazardous waste in the shipment, applicable RCRA hazardous waste code(s) for each hazardous waste, applicable OECD waste code for each hazardous waste from the lists incorporated by reference in 40 CFR 260.11, and the United Nations/U.S. Department of Transportation (DOT) ID number for each hazardous waste;

(vii) Date movement commenced;

(viii) Name (if not exporter), site address, telephone, fax numbers, and email of company originating the shipment;

(ix) Company name, EPA ID number, site address, telephone, fax numbers, and email address of all transporters;

(x) Identification (license, registered name or registration number) of means of transport, including types of packaging;

(xi) Any special precautions to be taken by transporter(s);

(xii) Certification/declaration signed and dated by the exporter that the information in the movement document is complete and correct;

(xiii) Appropriate signatures for each custody transfer (e.g., transporter, importer, and owner or operator of the foreign receiving facility);

(xiv) Each U.S. person that has physical custody of the hazardous waste from the time the movement commences until it arrives at the foreign receiving facility must sign the movement document (e.g., transporter, foreign importer, and owner or operator of the foreign receiving facility); and

(xv) As part of the contract requirements per paragraph (f) of this section, the exporter must require that the foreign receiving facility send a copy of the signed movement document to confirm receipt within three working days of shipment delivery to the exporter, and to the competent authorities of the countries of import and transit that control the shipment as an import and transit of hazardous waste respectively. For shipments occurring on or after the electronic import-export reporting compliance date, the exporter must:

(A) Initiate the movement document using the allowable methods listed in paragraph (b)(1) of this section; and

(B) Close out the movement document within three working days of receiving a copy of the signed movement document sent from the foreign receiving facility to confirm receipt using the allowable methods listed in paragraph (b)(1) of this section;

(xvi) As part of the contract requirements per paragraph (f) of this section, the exporter must require that the foreign receiving facility send a copy of the confirmation of recovery or disposal, as soon as possible, but no later than thirty days after completing recovery or disposal on the waste in the shipment and no later than one calendar year following receipt of the waste, to the exporter and to the competent authority of the country of import. If the movement includes shipment to a foreign interim receiving facility, the exporter must additionally require that the interim receiving facility promptly send copies of the confirmation of recovery or disposal that it receives from the final recovery or disposal facility within one year of shipment delivery to the final recovery or disposal facility that performed one of recovery operations R1 through R11, or RC1, or one of disposal operations D1 through D12, DC1 or DC2 as defined in § 262.81 to the competent authority of the country of import and to the exporter. For shipments occurring on or after the electronic import-export reporting compliance date, the exporter must submit each confirmation of recovery or disposal to the EPA within three working days of receiving the confirmation of recovery or disposal from the foreign receiving facility using the allowable methods listed in paragraph (b)(1) of this section; and

(xvii) For shipments sent to a country with which the EPA has established an electronic exchange of movement document tracking data, foreign receiving facility transmittal to the exporter of the confirmation of receipt and the confirmation of recovery or disposal may be sent via the electronic exchange.

(2) The movement document must include the following paragraphs (d)(2)(i) through (xv) of this section:

(i) The corresponding consent number(s) and hazardous waste number(s) for the listed hazardous waste from the relevant EPA AOC(s) and if required to be accompanied by a RCRA Uniform Hazardous Waste Manifest within the United States, the manifest tracking number from block 4;

(ii) The shipment number and the total number of shipments from the EPA AOC or the movement tracking number;

(iii) Exporter name and EPA identification number, site address, telephone, fax numbers, and email address;

(iv) Foreign receiving facility name, site address, telephone, fax numbers, email address, technologies employed, and the applicable recovery or disposal operations as defined in § 262.81;

(v) Foreign importer name (if not the owner or operator of the foreign receiving facility), site address, telephone, fax numbers, and email address;

(vi) Description(s) of each hazardous waste, quantity of each hazardous waste in the shipment, applicable RCRA hazardous waste code(s) for each hazardous waste, applicable OECD waste code for each hazardous waste from the lists incorporated by reference in 40 CFR 260.11, and the United Nations/U.S. Department of Transportation (DOT) ID number for each hazardous waste;

(vii) Date movement commenced;

(viii) Name (if not exporter), site address, telephone, fax numbers, and email of company originating the shipment;

(ix) Company name, EPA ID number, site address, telephone, fax numbers, and email address of all transporters;

(x) Identification (license, registered name or registration number) of means of transport, including types of packaging;

(xi) Any special precautions to be taken by transporter(s);

(xii) Certification/declaration signed and dated by the exporter that the information in the movement document is complete and correct;

(xiii) Appropriate signatures for each custody transfer (e.g., transporter, importer, and owner or operator of the foreign receiving facility);

(xiv) Each U.S. person that has physical custody of the hazardous waste from the time the movement commences until it arrives at the foreign receiving facility must sign the movement document (e.g., transporter, foreign importer, and owner or operator of the foreign receiving facility); and

(xv) As part of the contract requirements per paragraph (f) of this section, the exporter must require that the foreign receiving facility send a copy of the signed movement document to confirm receipt within three working days of shipment delivery to the exporter, and to the competent authorities of the countries of import and transit that control the shipment as an import and transit of hazardous waste respectively. For shipments occurring on or after the electronic import-export reporting compliance date, the exporter must:

(A) Initiate the movement document using the allowable methods listed in paragraph (b)(1) of this section; and

(B) Close out the movement document within three working days of receiving a copy of the signed movement document sent from the foreign receiving facility to confirm receipt using the allowable methods listed in paragraph (b)(1) of this section;

(xvi) As part of the contract requirements per paragraph (f) of this section, the exporter must require that the foreign receiving facility send a copy of the confirmation of recovery or disposal, as soon as possible, but no later than thirty days after completing recovery or disposal on the waste in the shipment and no later than one calendar year following receipt of the waste, to the exporter and to the competent authority of the country of import. If the movement includes shipment to a foreign interim receiving facility, the exporter must additionally require that the interim receiving facility promptly send copies of the confirmation of recovery or disposal that it receives from the final recovery or disposal facility within one year of shipment delivery to the final recovery or disposal facility that performed one of recovery operations R1 through R11, or RC1, or one of disposal operations D1 through D12, DC1 or DC2 as defined in § 262.81 to the competent authority of the country of import and to the exporter. For shipments occurring on or after the electronic import-export reporting compliance date, the exporter must submit each confirmation of recovery or disposal to the EPA within three working days of receiving the confirmation of recovery or disposal from the foreign receiving facility using the allowable methods listed in paragraph (b)(1) of this section; and

(xvii) For shipments sent to a country with which the EPA has established an electronic exchange of movement document tracking data, foreign receiving facility transmittal to the exporter of the confirmation of receipt and the confirmation of recovery or disposal may be sent via the electronic exchange.

(2) The movement document must include the following paragraphs (d)(2)(i) through (xv) of this section:

(i) The corresponding consent number(s) and hazardous waste number(s) for the listed hazardous waste from the relevant EPA AOC(s) and if required to be accompanied by a RCRA Uniform Hazardous Waste Manifest within the United States, the manifest tracking number from block 4;

(ii) The shipment number and the total number of shipments from the EPA AOC or the movement tracking number;

(iii) Exporter name and EPA identification number, site address, telephone, fax numbers, and email address;

(iv) Foreign receiving facility name, site address, telephone, fax numbers, email address, technologies employed, and the applicable recovery or disposal operations as defined in § 262.81;

(v) Foreign importer name (if not the owner or operator of the foreign receiving facility), site address, telephone, fax numbers, and email address;

(vi) Description(s) of each hazardous waste, quantity of each hazardous waste in the shipment, applicable RCRA hazardous waste code(s) for each hazardous waste, applicable OECD waste code for each hazardous waste from the lists incorporated by reference in 40 CFR 260.11, and the United Nations/U.S. Department of Transportation (DOT) ID number for each hazardous waste;

(vii) Date movement commenced;

(viii) Name (if not exporter), site address, telephone, fax numbers, and email of company originating the shipment;

(ix) Company name, EPA ID number, site address, telephone, fax numbers, and email address of all transporters;

(x) Identification (license, registered name or registration number) of means of transport, including types of packaging;

(xi) Any special precautions to be taken by transporter(s);

(xii) Certification/declaration signed and dated by the exporter that the information in the movement document is complete and correct;

(xiii) Appropriate signatures for each custody transfer (e.g., transporter, importer, and owner or operator of the foreign receiving facility);

(xiv) Each U.S. person that has physical custody of the hazardous waste from the time the movement commences until it arrives at the foreign receiving facility must sign the movement document (e.g., transporter, foreign importer, and owner or operator of the foreign receiving facility); and

(xv) As part of the contract requirements per paragraph (f) of this section, the exporter must require that the foreign receiving facility send a copy of the signed movement document to confirm receipt within three working days of shipment delivery to the exporter, and to the competent authorities of the countries of import and transit that control the shipment as an import and transit of hazardous waste respectively. For shipments occurring on or after the electronic import-export reporting compliance date, the exporter must:

(A) Initiate the movement document using the allowable methods listed in paragraph (b)(1) of this section; and

(B) Close out the movement document within three working days of receiving a copy of the signed movement document sent from the foreign receiving facility to confirm receipt using the allowable methods listed in paragraph (b)(1) of this section;

(xvi) As part of the contract requirements per paragraph (f) of this section, the exporter must require that the foreign receiving facility send a copy of the confirmation of recovery or disposal, as soon as possible, but no later than thirty days after completing recovery or disposal on the waste in the shipment and no later than one calendar year following receipt of the waste, to the exporter and to the competent authority of the country of import. If the movement includes shipment to a foreign interim receiving facility, the exporter must additionally require that the interim receiving facility promptly send copies of the confirmation of recovery or disposal that it receives from the final recovery or disposal facility within one year of shipment delivery to the final recovery or disposal facility that performed one of recovery operations R1 through R11, or RC1, or one of disposal operations D1 through D12, DC1 or DC2 as defined in § 262.81 to the competent authority of the country of import and to the exporter. For shipments occurring on or after the electronic import-export reporting compliance date, the exporter must submit each confirmation of recovery or disposal to the EPA within three working days of receiving the confirmation of recovery or disposal from the foreign receiving facility using the allowable methods listed in paragraph (b)(1) of this section; and

(xvii) For shipments sent to a country with which the EPA has established an electronic exchange of movement document tracking data, foreign receiving facility transmittal to the exporter of the confirmation of receipt and the confirmation of recovery or disposal may be sent via the electronic exchange.

(2) The movement document must include the following paragraphs (d)(2)(i) through (xv) of this section:

(i) The corresponding consent number(s) and hazardous waste number(s) for the listed hazardous waste from the relevant EPA AOC(s) and if required to be accompanied by a RCRA Uniform Hazardous Waste Manifest within the United States, the manifest tracking number from block 4;

(ii) The shipment number and the total number of shipments from the EPA AOC or the movement tracking number;

(iii) Exporter name and EPA identification number, site address, telephone, fax numbers, and email address;

(iv) Foreign receiving facility name, site address, telephone, fax numbers, email address, technologies employed, and the applicable recovery or disposal operations as defined in § 262.81;

(v) Foreign importer name (if not the owner or operator of the foreign receiving facility), site address, telephone, fax numbers, and email address;

(vi) Description(s) of each hazardous waste, quantity of each hazardous waste in the shipment, applicable RCRA hazardous waste code(s) for each hazardous waste, applicable OECD waste code for each hazardous waste from the lists incorporated by reference in 40 CFR 260.11, and the United Nations/U.S. Department of Transportation (DOT) ID number for each hazardous waste;

(vii) Date movement commenced;

(viii) Name (if not exporter), site address, telephone, fax numbers, and email of company originating the shipment;

(ix) Company name, EPA ID number, site address, telephone, fax numbers, and email address of all transporters;

(x) Identification (license, registered name or registration number) of means of transport, including types of packaging;

(xi) Any special precautions to be taken by transporter(s);

(xii) Certification/declaration signed and dated by the exporter that the information in the movement document is complete and correct;

(xiii) Appropriate signatures for each custody transfer (e.g., transporter, importer, and owner or operator of the foreign receiving facility);

(xiv) Each U.S. person that has physical custody of the hazardous waste from the time the movement commences until it arrives at the foreign receiving facility must sign the movement document (e.g., transporter, foreign importer, and owner or operator of the foreign receiving facility); and

(xv) As part of the contract requirements per paragraph (f) of this section, the exporter must require that the foreign receiving facility send a copy of the signed movement document to confirm receipt within three working days of shipment delivery to the exporter, and to the competent authorities of the countries of import and transit that control the shipment as an import and transit of hazardous waste respectively. For shipments occurring on or after the electronic import-export reporting compliance date, the exporter must:

(A) Initiate the movement document using the allowable methods listed in paragraph (b)(1) of this section; and

(B) Close out the movement document within three working days of receiving a copy of the signed movement document sent from the foreign receiving facility to confirm receipt using the allowable methods listed in paragraph (b)(1) of this section;

(xvi) As part of the contract requirements per paragraph (f) of this section, the exporter must require that the foreign receiving facility send a copy of the confirmation of recovery or disposal, as soon as possible, but no later than thirty days after completing recovery or disposal on the waste in the shipment and no later than one calendar year following receipt of the waste, to the exporter and to the competent authority of the country of import. If the movement includes shipment to a foreign interim receiving facility, the exporter must additionally require that the interim receiving facility promptly send copies of the confirmation of recovery or disposal that it receives from the final recovery or disposal facility within one year of shipment delivery to the final recovery or disposal facility that performed one of recovery operations R1 through R11, or RC1, or one of disposal operations D1 through D12, DC1 or DC2 as defined in § 262.81 to the competent authority of the country of import and to the exporter. For shipments occurring on or after the electronic import-export reporting compliance date, the exporter must submit each confirmation of recovery or disposal to the EPA within three working days of receiving the confirmation of recovery or disposal from the foreign receiving facility using the allowable methods listed in paragraph (b)(1) of this section; and

(xvii) For shipments sent to a country with which the EPA has established an electronic exchange of movement document tracking data, foreign receiving facility transmittal to the exporter of the confirmation of receipt and the confirmation of recovery or disposal may be sent via the electronic exchange.

(2) The movement document must include the following paragraphs (d)(2)(i) through (xv) of this section:

(i) The corresponding consent number(s) and hazardous waste number(s) for the listed hazardous waste from the relevant EPA AOC(s) and if required to be accompanied by a RCRA Uniform Hazardous Waste Manifest within the United States, the manifest tracking number from block 4;

(ii) The shipment number and the total number of shipments from the EPA AOC or the movement tracking number;

(iii) Exporter name and EPA identification number, site address, telephone, fax numbers, and email address;

(iv) Foreign receiving facility name, site address, telephone, fax numbers, email address, technologies employed, and the applicable recovery or disposal operations as defined in § 262.81;

(v) Foreign importer name (if not the owner or operator of the foreign receiving facility), site address, telephone, fax numbers, and email address;

(vi) Description(s) of each hazardous waste, quantity of each hazardous waste in the shipment, applicable RCRA hazardous waste code(s) for each hazardous waste, applicable OECD waste code for each hazardous waste from the lists incorporated by reference in 40 CFR 260.11, and the United Nations/U.S. Department of Transportation (DOT) ID number for each hazardous waste;

(vii) Date movement commenced;

(viii) Name (if not exporter), site address, telephone, fax numbers, and email of company originating the shipment;

(ix) Company name, EPA ID number, site address, telephone, fax numbers, and email address of all transporters;

(x) Identification (license, registered name or registration number) of means of transport, including types of packaging;

(xi) Any special precautions to be taken by transporter(s);

(xii) Certification/declaration signed and dated by the exporter that the information in the movement document is complete and correct;

(xiii) Appropriate signatures for each custody transfer (e.g., transporter, importer, and owner or operator of the foreign receiving facility);

(xiv) Each U.S. person that has physical custody of the hazardous waste from the time the movement commences until it arrives at the foreign receiving facility must sign the movement document (e.g., transporter, foreign importer, and owner or operator of the foreign receiving facility); and

(xv) As part of the contract requirements per paragraph (f) of this section, the exporter must require that the foreign receiving facility send a copy of the signed movement document to confirm receipt within three working days of shipment delivery to the exporter, and to the competent authorities of the countries of import and transit that control the shipment as an import and transit of hazardous waste respectively. For shipments occurring on or after the electronic import-export reporting compliance date, the exporter must:

(A) Initiate the movement document using the allowable methods listed in paragraph (b)(1) of this section; and

(B) Close out the movement document within three working days of receiving a copy of the signed movement document sent from the foreign receiving facility to confirm receipt using the allowable methods listed in paragraph (b)(1) of this section;

(xvi) As part of the contract requirements per paragraph (f) of this section, the exporter must require that the foreign receiving facility send a copy of the confirmation of recovery or disposal, as soon as possible, but no later than thirty days after completing recovery or disposal on the waste in the shipment and no later than one calendar year following receipt of the waste, to the exporter and to the competent authority of the country of import. If the movement includes shipment to a foreign interim receiving facility, the exporter must additionally require that the interim receiving facility promptly send copies of the confirmation of recovery or disposal that it receives from the final recovery or disposal facility within one year of shipment delivery to the final recovery or disposal facility that performed one of recovery operations R1 through R11, or RC1, or one of disposal operations D1 through D12, DC1 or DC2 as defined in § 262.81 to the competent authority of the country of import and to the exporter. For shipments occurring on or after the electronic import-export reporting compliance date, the exporter must submit each confirmation of recovery or disposal to the EPA within three working days of receiving the confirmation of recovery or disposal from the foreign receiving facility using the allowable methods listed in paragraph (b)(1) of this section; and

(xvii) For shipments sent to a country with which the EPA has established an electronic exchange of movement document tracking data, foreign receiving facility transmittal to the exporter of the confirmation of receipt and the confirmation of recovery or disposal may be sent via the electronic exchange.

(2) The movement document must include the following paragraphs (d)(2)(i) through (xv) of this section:

(i) The corresponding consent number(s) and hazardous waste number(s) for the listed hazardous waste from the relevant EPA AOC(s) and if required to be accompanied by a RCRA Uniform Hazardous Waste Manifest within the United States, the manifest tracking number from block 4;

(ii) The shipment number and the total number of shipments from the EPA AOC or the movement tracking number;

(iii) Exporter name and EPA identification number, site address, telephone, fax numbers, and email address;

(iv) Foreign receiving facility name, site address, telephone, fax numbers, email address, technologies employed, and the applicable recovery or disposal operations as defined in § 262.81;

(v) Foreign importer name (if not the owner or operator of the foreign receiving facility), site address, telephone, fax numbers, and email address;

(vi) Description(s) of each hazardous waste, quantity of each hazardous waste in the shipment, applicable RCRA hazardous waste code(s) for each hazardous waste, applicable OECD waste code for each hazardous waste from the lists incorporated by reference in 40 CFR 260.11, and the United Nations/U.S. Department of Transportation (DOT) ID number for each hazardous waste;

(vii) Date movement commenced;

(viii) Name (if not exporter), site address, telephone, fax numbers, and email of company originating the shipment;

(ix) Company name, EPA ID number, site address, telephone, fax numbers, and email address of all transporters;

(x) Identification (license, registered name or registration number) of means of transport, including types of packaging;

(xi) Any special precautions to be taken by transporter(s);

(xii) Certification/declaration signed and dated by the exporter that the information in the movement document is complete and correct;

(xiii) Appropriate signatures for each custody transfer (e.g., transporter, importer, and owner or operator of the foreign receiving facility);

(xiv) Each U.S. person that has physical custody of the hazardous waste from the time the movement commences until it arrives at the foreign receiving facility must sign the movement document (e.g., transporter, foreign importer, and owner or operator of the foreign receiving facility); and

(xv) As part of the contract requirements per paragraph (f) of this section, the exporter must require that the foreign receiving facility send a copy of the signed movement document to confirm receipt within three working days of shipment delivery to the exporter, and to the competent authorities of the countries of import and transit that control the shipment as an import and transit of hazardous waste respectively. For shipments occurring on or after the electronic import-export reporting compliance date, the exporter must:

(A) Initiate the movement document using the allowable methods listed in paragraph (b)(1) of this section; and

(B) Close out the movement document within three working days of receiving a copy of the signed movement document sent from the foreign receiving facility to confirm receipt using the allowable methods listed in paragraph (b)(1) of this section;

(xvi) As part of the contract requirements per paragraph (f) of this section, the exporter must require that the foreign receiving facility send a copy of the confirmation of recovery or disposal, as soon as possible, but no later than thirty days after completing recovery or disposal on the waste in the shipment and no later than one calendar year following receipt of the waste, to the exporter and to the competent authority of the country of import. If the movement includes shipment to a foreign interim receiving facility, the exporter must additionally require that the interim receiving facility promptly send copies of the confirmation of recovery or disposal that it receives from the final recovery or disposal facility within one year of shipment delivery to the final recovery or disposal facility that performed one of recovery operations R1 through R11, or RC1, or one of disposal operations D1 through D12, DC1 or DC2 as defined in § 262.81 to the competent authority of the country of import and to the exporter. For shipments occurring on or after the electronic import-export reporting compliance date, the exporter must submit each confirmation of recovery or disposal to the EPA within three working days of receiving the confirmation of recovery or disposal from the foreign receiving facility using the allowable methods listed in paragraph (b)(1) of this section; and

(xvii) For shipments sent to a country with which the EPA has established an electronic exchange of movement document tracking data, foreign receiving facility transmittal to the exporter of the confirmation of receipt and the confirmation of recovery or disposal may be sent via the electronic exchange.

(2) The movement document must include the following paragraphs (d)(2)(i) through (xv) of this section:

(i) The corresponding consent number(s) and hazardous waste number(s) for the listed hazardous waste from the relevant EPA AOC(s) and if required to be accompanied by a RCRA Uniform Hazardous Waste Manifest within the United States, the manifest tracking number from block 4;

(ii) The shipment number and the total number of shipments from the EPA AOC or the movement tracking number;

(iii) Exporter name and EPA identification number, site address, telephone, fax numbers, and email address;

(iv) Foreign receiving facility name, site address, telephone, fax numbers, email address, technologies employed, and the applicable recovery or disposal operations as defined in § 262.81;

(v) Foreign importer name (if not the owner or operator of the foreign receiving facility), site address, telephone, fax numbers, and email address;

(vi) Description(s) of each hazardous waste, quantity of each hazardous waste in the shipment, applicable RCRA hazardous waste code(s) for each hazardous waste, applicable OECD waste code for each hazardous waste from the lists incorporated by reference in 40 CFR 260.11, and the United Nations/U.S. Department of Transportation (DOT) ID number for each hazardous waste;

(vii) Date movement commenced;

(viii) Name (if not exporter), site address, telephone, fax numbers, and email of company originating the shipment;

(ix) Company name, EPA ID number, site address, telephone, fax numbers, and email address of all transporters;

(x) Identification (license, registered name or registration number) of means of transport, including types of packaging;

(xi) Any special precautions to be taken by transporter(s);

(xii) Certification/declaration signed and dated by the exporter that the information in the movement document is complete and correct;

(xiii) Appropriate signatures for each custody transfer (e.g., transporter, importer, and owner or operator of the foreign receiving facility);

(xiv) Each U.S. person that has physical custody of the hazardous waste from the time the movement commences until it arrives at the foreign receiving facility must sign the movement document (e.g., transporter, foreign importer, and owner or operator of the foreign receiving facility); and

(xv) As part of the contract requirements per paragraph (f) of this section, the exporter must require that the foreign receiving facility send a copy of the signed movement document to confirm receipt within three working days of shipment delivery to the exporter, and to the competent authorities of the countries of import and transit that control the shipment as an import and transit of hazardous waste respectively. For shipments occurring on or after the electronic import-export reporting compliance date, the exporter must:

(A) Initiate the movement document using the allowable methods listed in paragraph (b)(1) of this section; and

(B) Close out the movement document within three working days of receiving a copy of the signed movement document sent from the foreign receiving facility to confirm receipt using the allowable methods listed in paragraph (b)(1) of this section;

(xvi) As part of the contract requirements per paragraph (f) of this section, the exporter must require that the foreign receiving facility send a copy of the confirmation of recovery or disposal, as soon as possible, but no later than thirty days after completing recovery or disposal on the waste in the shipment and no later than one calendar year following receipt of the waste, to the exporter and to the competent authority of the country of import. If the movement includes shipment to a foreign interim receiving facility, the exporter must additionally require that the interim receiving facility promptly send copies of the confirmation of recovery or disposal that it receives from the final recovery or disposal facility within one year of shipment delivery to the final recovery or disposal facility that performed one of recovery operations R1 through R11, or RC1, or one of disposal operations D1 through D12, DC1 or DC2 as defined in § 262.81 to the competent authority of the country of import and to the exporter. For shipments occurring on or after the electronic import-export reporting compliance date, the exporter must submit each confirmation of recovery or disposal to the EPA within three working days of receiving the confirmation of recovery or disposal from the foreign receiving facility using the allowable methods listed in paragraph (b)(1) of this section; and

(xvii) For shipments sent to a country with which the EPA has established an electronic exchange of movement document tracking data, foreign receiving facility transmittal to the exporter of the confirmation of receipt and the confirmation of recovery or disposal may be sent via the electronic exchange.

(2) The movement document must include the following paragraphs (d)(2)(i) through (xv) of this section:

(i) The corresponding consent number(s) and hazardous waste number(s) for the listed hazardous waste from the relevant EPA AOC(s) and if required to be accompanied by a RCRA Uniform Hazardous Waste Manifest within the United States, the manifest tracking number from block 4;

(ii) The shipment number and the total number of shipments from the EPA AOC or the movement tracking number;

(iii) Exporter name and EPA identification number, site address, telephone, fax numbers, and email address;

(iv) Foreign receiving facility name, site address, telephone, fax numbers, email address, technologies employed, and the applicable recovery or disposal operations as defined in § 262.81;

(v) Foreign importer name (if not the owner or operator of the foreign receiving facility), site address, telephone, fax numbers, and email address;

(vi) Description(s) of each hazardous waste, quantity of each hazardous waste in the shipment, applicable RCRA hazardous waste code(s) for each hazardous waste, applicable OECD waste code for each hazardous waste from the lists incorporated by reference in 40 CFR 260.11, and the United Nations/U.S. Department of Transportation (DOT) ID number for each hazardous waste;

(vii) Date movement commenced;

(viii) Name (if not exporter), site address, telephone, fax numbers, and email of company originating the shipment;

(ix) Company name, EPA ID number, site address, telephone, fax numbers, and email address of all transporters;

(x) Identification (license, registered name or registration number) of means of transport, including types of packaging;

(xi) Any special precautions to be taken by transporter(s);

(xii) Certification/declaration signed and dated by the exporter that the information in the movement document is complete and correct;

(xiii) Appropriate signatures for each custody transfer (e.g., transporter, importer, and owner or operator of the foreign receiving facility);

(xiv) Each U.S. person that has physical custody of the hazardous waste from the time the movement commences until it arrives at the foreign receiving facility must sign the movement document (e.g., transporter, foreign importer, and owner or operator of the foreign receiving facility); and

(xv) As part of the contract requirements per paragraph (f) of this section, the exporter must require that the foreign receiving facility send a copy of the signed movement document to confirm receipt within three working days of shipment delivery to the exporter, and to the competent authorities of the countries of import and transit that control the shipment as an import and transit of hazardous waste respectively. For shipments occurring on or after the electronic import-export reporting compliance date, the exporter must:

(A) Initiate the movement document using the allowable methods listed in paragraph (b)(1) of this section; and

(B) Close out the movement document within three working days of receiving a copy of the signed movement document sent from the foreign receiving facility to confirm receipt using the allowable methods listed in paragraph (b)(1) of this section;

(xvi) As part of the contract requirements per paragraph (f) of this section, the exporter must require that the foreign receiving facility send a copy of the confirmation of recovery or disposal, as soon as possible, but no later than thirty days after completing recovery or disposal on the waste in the shipment and no later than one calendar year following receipt of the waste, to the exporter and to the competent authority of the country of import. If the movement includes shipment to a foreign interim receiving facility, the exporter must additionally require that the interim receiving facility promptly send copies of the confirmation of recovery or disposal that it receives from the final recovery or disposal facility within one year of shipment delivery to the final recovery or disposal facility that performed one of recovery operations R1 through R11, or RC1, or one of disposal operations D1 through D12, DC1 or DC2 as defined in § 262.81 to the competent authority of the country of import and to the exporter. For shipments occurring on or after the electronic import-export reporting compliance date, the exporter must submit each confirmation of recovery or disposal to the EPA within three working days of receiving the confirmation of recovery or disposal from the foreign receiving facility using the allowable methods listed in paragraph (b)(1) of this section; and

(xvii) For shipments sent to a country with which the EPA has established an electronic exchange of movement document tracking data, foreign receiving facility transmittal to the exporter of the confirmation of receipt and the confirmation of recovery or disposal may be sent via the electronic exchange.

(2) The movement document must include the following paragraphs (d)(2)(i) through (xv) of this section:

(i) The corresponding consent number(s) and hazardous waste number(s) for the listed hazardous waste from the relevant EPA AOC(s) and if required to be accompanied by a RCRA Uniform Hazardous Waste Manifest within the United States, the manifest tracking number from block 4;

(ii) The shipment number and the total number of shipments from the EPA AOC or the movement tracking number;

(iii) Exporter name and EPA identification number, site address, telephone, fax numbers, and email address;

(iv) Foreign receiving facility name, site address, telephone, fax numbers, email address, technologies employed, and the applicable recovery or disposal operations as defined in § 262.81;

(v) Foreign importer name (if not the owner or operator of the foreign receiving facility), site address, telephone, fax numbers, and email address;

(vi) Description(s) of each hazardous waste, quantity of each hazardous waste in the shipment, applicable RCRA hazardous waste code(s) for each hazardous waste, applicable OECD waste code for each hazardous waste from the lists incorporated by reference in 40 CFR 260.11, and the United Nations/U.S. Department of Transportation (DOT) ID number for each hazardous waste;

(vii) Date movement commenced;

(viii) Name (if not exporter), site address, telephone, fax numbers, and email of company originating the shipment;

(ix) Company name, EPA ID number, site address, telephone, fax numbers, and email address of all transporters;

(x) Identification (license, registered name or registration number) of means of transport, including types of packaging;

(xi) Any special precautions to be taken by transporter(s);

(xii) Certification/declaration signed and dated by the exporter that the information in the movement document is complete and correct;

(xiii) Appropriate signatures for each custody transfer (e.g., transporter, importer, and owner or operator of the foreign receiving facility);

(xiv) Each U.S. person that has physical custody of the hazardous waste from the time the movement commences until it arrives at the foreign receiving facility must sign the movement document (e.g., transporter, foreign importer, and owner or operator of the foreign receiving facility); and

(xv) As part of the contract requirements per paragraph (f) of this section, the exporter must require that the foreign receiving facility send a copy of the signed movement document to confirm receipt within three working days of shipment delivery to the exporter, and to the competent authorities of the countries of import and transit that control the shipment as an import and transit of hazardous waste respectively. For shipments occurring on or after the electronic import-export reporting compliance date, the exporter must:

(A) Initiate the movement document using the allowable methods listed in paragraph (b)(1) of this section; and

(B) Close out the movement document within three working days of receiving a copy of the signed movement document sent from the foreign receiving facility to confirm receipt using the allowable methods listed in paragraph (b)(1) of this section;

(xvi) As part of the contract requirements per paragraph (f) of this section, the exporter must require that the foreign receiving facility send a copy of the confirmation of recovery or disposal, as soon as possible, but no later than thirty days after completing recovery or disposal on the waste in the shipment and no later than one calendar year following receipt of the waste, to the exporter and to the competent authority of the country of import. If the movement includes shipment to a foreign interim receiving facility, the exporter must additionally require that the interim receiving facility promptly send copies of the confirmation of recovery or disposal that it receives from the final recovery or disposal facility within one year of shipment delivery to the final recovery or disposal facility that performed one of recovery operations R1 through R11, or RC1, or one of disposal operations D1 through D12, DC1 or DC2 as defined in § 262.81 to the competent authority of the country of import and to the exporter. For shipments occurring on or after the electronic import-export reporting compliance date, the exporter must submit each confirmation of recovery or disposal to the EPA within three working days of receiving the confirmation of recovery or disposal from the foreign receiving facility using the allowable methods listed in paragraph (b)(1) of this section; and

(xvii) For shipments sent to a country with which the EPA has established an electronic exchange of movement document tracking data, foreign receiving facility transmittal to the exporter of the confirmation of receipt and the confirmation of recovery or disposal may be sent via the electronic exchange.

(2) The movement document must include the following paragraphs (d)(2)(i) through (xv) of this section:

(i) The corresponding consent number(s) and hazardous waste number(s) for the listed hazardous waste from the relevant EPA AOC(s) and if required to be accompanied by a RCRA Uniform Hazardous Waste Manifest within the United States, the manifest tracking number from block 4;

(ii) The shipment number and the total number of shipments from the EPA AOC or the movement tracking number;

(iii) Exporter name and EPA identification number, site address, telephone, fax numbers, and email address;

(iv) Foreign receiving facility name, site address, telephone, fax numbers, email address, technologies employed, and the applicable recovery or disposal operations as defined in § 262.81;

(v) Foreign importer name (if not the owner or operator of the foreign receiving facility), site address, telephone, fax numbers, and email address;

(vi) Description(s) of each hazardous waste, quantity of each hazardous waste in the shipment, applicable RCRA hazardous waste code(s) for each hazardous waste, applicable OECD waste code for each hazardous waste from the lists incorporated by reference in 40 CFR 260.11, and the United Nations/U.S. Department of Transportation (DOT) ID number for each hazardous waste;

(vii) Date movement commenced;

(viii) Name (if not exporter), site address, telephone, fax numbers, and email of company originating the shipment;

(ix) Company name, EPA ID number, site address, telephone, fax numbers, and email address of all transporters;

(x) Identification (license, registered name or registration number) of means of transport, including types of packaging;

(xi) Any special precautions to be taken by transporter(s);

(xii) Certification/declaration signed and dated by the exporter that the information in the movement document is complete and correct;

(xiii) Appropriate signatures for each custody transfer (e.g., transporter, importer, and owner or operator of the foreign receiving facility);

(xiv) Each U.S. person that has physical custody of the hazardous waste from the time the movement commences until it arrives at the foreign receiving facility must sign the movement document (e.g., transporter, foreign importer, and owner or operator of the foreign receiving facility); and

(xv) As part of the contract requirements per paragraph (f) of this section, the exporter must require that the foreign receiving facility send a copy of the signed movement document to confirm receipt within three working days of shipment delivery to the exporter, and to the competent authorities of the countries of import and transit that control the shipment as an import and transit of hazardous waste respectively. For shipments occurring on or after the electronic import-export reporting compliance date, the exporter must:

(A) Initiate the movement document using the allowable methods listed in paragraph (b)(1) of this section; and

(B) Close out the movement document within three working days of receiving a copy of the signed movement document sent from the foreign receiving facility to confirm receipt using the allowable methods listed in paragraph (b)(1) of this section;

(xvi) As part of the contract requirements per paragraph (f) of this section, the exporter must require that the foreign receiving facility send a copy of the confirmation of recovery or disposal, as soon as possible, but no later than thirty days after completing recovery or disposal on the waste in the shipment and no later than one calendar year following receipt of the waste, to the exporter and to the competent authority of the country of import. If the movement includes shipment to a foreign interim receiving facility, the exporter must additionally require that the interim receiving facility promptly send copies of the confirmation of recovery or disposal that it receives from the final recovery or disposal facility within one year of shipment delivery to the final recovery or disposal facility that performed one of recovery operations R1 through R11, or RC1, or one of disposal operations D1 through D12, DC1 or DC2 as defined in § 262.81 to the competent authority of the country of import and to the exporter. For shipments occurring on or after the electronic import-export reporting compliance date, the exporter must submit each confirmation of recovery or disposal to the EPA within three working days of receiving the confirmation of recovery or disposal from the foreign receiving facility using the allowable methods listed in paragraph (b)(1) of this section; and

(xvii) For shipments sent to a country with which the EPA has established an electronic exchange of movement document tracking data, foreign receiving facility transmittal to the exporter of the confirmation of receipt and the confirmation of recovery or disposal may be sent via the electronic exchange.

(2) The movement document must include the following paragraphs (d)(2)(i) through (xv) of this section:

(i) The corresponding consent number(s) and hazardous waste number(s) for the listed hazardous waste from the relevant EPA AOC(s) and if required to be accompanied by a RCRA Uniform Hazardous Waste Manifest within the United States, the manifest tracking number from block 4;

(ii) The shipment number and the total number of shipments from the EPA AOC or the movement tracking number;

(iii) Exporter name and EPA identification number, site address, telephone, fax numbers, and email address;

(iv) Foreign receiving facility name, site address, telephone, fax numbers, email address, technologies employed, and the applicable recovery or disposal operations as defined in § 262.81;

(v) Foreign importer name (if not the owner or operator of the foreign receiving facility), site address, telephone, fax numbers, and email address;

(vi) Description(s) of each hazardous waste, quantity of each hazardous waste in the shipment, applicable RCRA hazardous waste code(s) for each hazardous waste, applicable OECD waste code for each hazardous waste from the lists incorporated by reference in 40 CFR 260.11, and the United Nations/U.S. Department of Transportation (DOT) ID number for each hazardous waste;

(vii) Date movement commenced;

(viii) Name (if not exporter), site address, telephone, fax numbers, and email of company originating the shipment;

(ix) Company name, EPA ID number, site address, telephone, fax numbers, and email address of all transporters;

(x) Identification (license, registered name or registration number) of means of transport, including types of packaging;

(xi) Any special precautions to be taken by transporter(s);

(xii) Certification/declaration signed and dated by the exporter that the information in the movement document is complete and correct;

(xiii) Appropriate signatures for each custody transfer (e.g., transporter, importer, and owner or operator of the foreign receiving facility);

(xiv) Each U.S. person that has physical custody of the hazardous waste from the time the movement commences until it arrives at the foreign receiving facility must sign the movement document (e.g., transporter, foreign importer, and owner or operator of the foreign receiving facility); and

(xv) As part of the contract requirements per paragraph (f) of this section, the exporter must require that the foreign receiving facility send a copy of the signed movement document to confirm receipt within three working days of shipment delivery to the exporter, and to the competent authorities of the countries of import and transit that control the shipment as an import and transit of hazardous waste respectively. For shipments occurring on or after the electronic import-export reporting compliance date, the exporter must:

(A) Initiate the movement document using the allowable methods listed in paragraph (b)(1) of this section; and

(B) Close out the movement document within three working days of receiving a copy of the signed movement document sent from the foreign receiving facility to confirm receipt using the allowable methods listed in paragraph (b)(1) of this section;

(xvi) As part of the contract requirements per paragraph (f) of this section, the exporter must require that the foreign receiving facility send a copy of the confirmation of recovery or disposal, as soon as possible, but no later than thirty days after completing recovery or disposal on the waste in the shipment and no later than one calendar year following receipt of the waste, to the exporter and to the competent authority of the country of import. If the movement includes shipment to a foreign interim receiving facility, the exporter must additionally require that the interim receiving facility promptly send copies of the confirmation of recovery or disposal that it receives from the final recovery or disposal facility within one year of shipment delivery to the final recovery or disposal facility that performed one of recovery operations R1 through R11, or RC1, or one of disposal operations D1 through D12, DC1 or DC2 as defined in § 262.81 to the competent authority of the country of import and to the exporter. For shipments occurring on or after the electronic import-export reporting compliance date, the exporter must submit each confirmation of recovery or disposal to the EPA within three working days of receiving the confirmation of recovery or disposal from the foreign receiving facility using the allowable methods listed in paragraph (b)(1) of this section; and

(xvii) For shipments sent to a country with which the EPA has established an electronic exchange of movement document tracking data, foreign receiving facility transmittal to the exporter of the confirmation of receipt and the confirmation of recovery or disposal may be sent via the electronic exchange.

(2) The movement document must include the following paragraphs (d)(2)(i) through (xv) of this section:

(i) The corresponding consent number(s) and hazardous waste number(s) for the listed hazardous waste from the relevant EPA AOC(s) and if required to be accompanied by a RCRA Uniform Hazardous Waste Manifest within the United States, the manifest tracking number from block 4;

(ii) The shipment number and the total number of shipments from the EPA AOC or the movement tracking number;

(iii) Exporter name and EPA identification number, site address, telephone, fax numbers, and email address;

(iv) Foreign receiving facility name, site address, telephone, fax numbers, email address, technologies employed, and the applicable recovery or disposal operations as defined in § 262.81;

(v) Foreign importer name (if not the owner or operator of the foreign receiving facility), site address, telephone, fax numbers, and email address;

(vi) Description(s) of each hazardous waste, quantity of each hazardous waste in the shipment, applicable RCRA hazardous waste code(s) for each hazardous waste, applicable OECD waste code for each hazardous waste from the lists incorporated by reference in 40 CFR 260.11, and the United Nations/U.S. Department of Transportation (DOT) ID number for each hazardous waste;

(vii) Date movement commenced;

(viii) Name (if not exporter), site address, telephone, fax numbers, and email of company originating the shipment;

(ix) Company name, EPA ID number, site address, telephone, fax numbers, and email address of all transporters;

(x) Identification (license, registered name or registration number) of means of transport, including types of packaging;

(xi) Any special precautions to be taken by transporter(s);

(xii) Certification/declaration signed and dated by the exporter that the information in the movement document is complete and correct;

(xiii) Appropriate signatures for each custody transfer (e.g., transporter, importer, and owner or operator of the foreign receiving facility);

(xiv) Each U.S. person that has physical custody of the hazardous waste from the time the movement commences until it arrives at the foreign receiving facility must sign the movement document (e.g., transporter, foreign importer, and owner or operator of the foreign receiving facility); and

(xv) As part of the contract requirements per paragraph (f) of this section, the exporter must require that the foreign receiving facility send a copy of the signed movement document to confirm receipt within three working days of shipment delivery to the exporter, and to the competent authorities of the countries of import and transit that control the shipment as an import and transit of hazardous waste respectively. For shipments occurring on or after the electronic import-export reporting compliance date, the exporter must:

(A) Initiate the movement document using the allowable methods listed in paragraph (b)(1) of this section; and

(B) Close out the movement document within three working days of receiving a copy of the signed movement document sent from the foreign receiving facility to confirm receipt using the allowable methods listed in paragraph (b)(1) of this section;

(xvi) As part of the contract requirements per paragraph (f) of this section, the exporter must require that the foreign receiving facility send a copy of the confirmation of recovery or disposal, as soon as possible, but no later than thirty days after completing recovery or disposal on the waste in the shipment and no later than one calendar year following receipt of the waste, to the exporter and to the competent authority of the country of import. If the movement includes shipment to a foreign interim receiving facility, the exporter must additionally require that the interim receiving facility promptly send copies of the confirmation of recovery or disposal that it receives from the final recovery or disposal facility within one year of shipment delivery to the final recovery or disposal facility that performed one of recovery operations R1 through R11, or RC1, or one of disposal operations D1 through D12, DC1 or DC2 as defined in § 262.81 to the competent authority of the country of import and to the exporter. For shipments occurring on or after the electronic import-export reporting compliance date, the exporter must submit each confirmation of recovery or disposal to the EPA within three working days of receiving the confirmation of recovery or disposal from the foreign receiving facility using the allowable methods listed in paragraph (b)(1) of this section; and

(xvii) For shipments sent to a country with which the EPA has established an electronic exchange of movement document tracking data, foreign receiving facility transmittal to the exporter of the confirmation of receipt and the confirmation of recovery or disposal may be sent via the electronic exchange.

(2) The movement document must include the following paragraphs (d)(2)(i) through (xv) of this section:

(i) The corresponding consent number(s) and hazardous waste number(s) for the listed hazardous waste from the relevant EPA AOC(s) and if required to be accompanied by a RCRA Uniform Hazardous Waste Manifest within the United States, the manifest tracking number from block 4;

(ii) The shipment number and the total number of shipments from the EPA AOC or the movement tracking number;

(iii) Exporter name and EPA identification number, site address, telephone, fax numbers, and email address;

(iv) Foreign receiving facility name, site address, telephone, fax numbers, email address, technologies employed, and the applicable recovery or disposal operations as defined in § 262.81;

(v) Foreign importer name (if not the owner or operator of the foreign receiving facility), site address, telephone, fax numbers, and email address;

(vi) Description(s) of each hazardous waste, quantity of each hazardous waste in the shipment, applicable RCRA hazardous waste code(s) for each hazardous waste, applicable OECD waste code for each hazardous waste from the lists incorporated by reference in 40 CFR 260.11, and the United Nations/U.S. Department of Transportation (DOT) ID number for each hazardous waste;

(vii) Date movement commenced;

(viii) Name (if not exporter), site address, telephone, fax numbers, and email of company originating the shipment;

(ix) Company name, EPA ID number, site address, telephone, fax numbers, and email address of all transporters;

(x) Identification (license, registered name or registration number) of means of transport, including types of packaging;

(xi) Any special precautions to be taken by transporter(s);

(xii) Certification/declaration signed and dated by the exporter that the information in the movement document is complete and correct;

(xiii) Appropriate signatures for each custody transfer (e.g., transporter, importer, and owner or operator of the foreign receiving facility);

(xiv) Each U.S. person that has physical custody of the hazardous waste from the time the movement commences until it arrives at the foreign receiving facility must sign the movement document (e.g., transporter, foreign importer, and owner or operator of the foreign receiving facility); and

(xv) As part of the contract requirements per paragraph (f) of this section, the exporter must require that the foreign receiving facility send a copy of the signed movement document to confirm receipt within three working days of shipment delivery to the exporter, and to the competent authorities of the countries of import and transit that control the shipment as an import and transit of hazardous waste respectively. For shipments occurring on or after the electronic import-export reporting compliance date, the exporter must:

(A) Initiate the movement document using the allowable methods listed in paragraph (b)(1) of this section; and

(B) Close out the movement document within three working days of receiving a copy of the signed movement document sent from the foreign receiving facility to confirm receipt using the allowable methods listed in paragraph (b)(1) of this section;

(xvi) As part of the contract requirements per paragraph (f) of this section, the exporter must require that the foreign receiving facility send a copy of the confirmation of recovery or disposal, as soon as possible, but no later than thirty days after completing recovery or disposal on the waste in the shipment and no later than one calendar year following receipt of the waste, to the exporter and to the competent authority of the country of import. If the movement includes shipment to a foreign interim receiving facility, the exporter must additionally require that the interim receiving facility promptly send copies of the confirmation of recovery or disposal that it receives from the final recovery or disposal facility within one year of shipment delivery to the final recovery or disposal facility that performed one of recovery operations R1 through R11, or RC1, or one of disposal operations D1 through D12, DC1 or DC2 as defined in § 262.81 to the competent authority of the country of import and to the exporter. For shipments occurring on or after the electronic import-export reporting compliance date, the exporter must submit each confirmation of recovery or disposal to the EPA within three working days of receiving the confirmation of recovery or disposal from the foreign receiving facility using the allowable methods listed in paragraph (b)(1) of this section; and

(xvii) For shipments sent to a country with which the EPA has established an electronic exchange of movement document tracking data, foreign receiving facility transmittal to the exporter of the confirmation of receipt and the confirmation of recovery or disposal may be sent via the electronic exchange.

(2) Contracts or equivalent arrangements must specify the name and EPA ID number, where available, of paragraph (f)(2)(i) through (iv) of this section:

(i) The company from where each export shipment of hazardous waste is initiated;

(ii) Each person who will have physical custody of the hazardous wastes;

(iii) Each person who will have legal control of the hazardous wastes; and

(2) Contracts or equivalent arrangements must specify the name and EPA ID number, where available, of paragraph (f)(2)(i) through (iv) of this section:

(i) The company from where each export shipment of hazardous waste is initiated;

(ii) Each person who will have physical custody of the hazardous wastes;

(iii) Each person who will have legal control of the hazardous wastes; and

(2) Contracts or equivalent arrangements must specify the name and EPA ID number, where available, of paragraph (f)(2)(i) through (iv) of this section:

(i) The company from where each export shipment of hazardous waste is initiated;

(ii) Each person who will have physical custody of the hazardous wastes;

(iii) Each person who will have legal control of the hazardous wastes; and

(2) Contracts or equivalent arrangements must specify the name and EPA ID number, where available, of paragraph (f)(2)(i) through (iv) of this section:

(i) The company from where each export shipment of hazardous waste is initiated;

(ii) Each person who will have physical custody of the hazardous wastes;

(iii) Each person who will have legal control of the hazardous wastes; and

(1) Guidance Manual for the Control of Transboundary Movements of Recoverable Wastes, copyright 2009, Annex B: OECD Consolidated List of Wastes Subject to the Green Control Procedure and Annex C: OECD Consolidated List of Wastes Subject to the Amber Control Procedure, IBR approved for §§ 262.82(a), 262.83(b), (d), and (g), and 262.84(b) and (d).

(c) Exports of hazardous waste to foreign countries are not required to be reported on the Biennial Report form. A separate annual report requirement is set forth at § 262.83(g) for hazardous waste exporters.

(g) The exporter shall file an annual report with the EPA no later than March 1 of each year summarizing the types, quantities, frequency, and ultimate destination of all such hazardous waste exported during the previous calendar year. The exporter must submit annual reports to the EPA using the allowable methods specified in paragraph (b)(1) of this section. The annual report must include all of the following paragraphs (g)(1) through (6) of this section specified as follows:

(1) The EPA identification number, name, and mailing and site address of the exporter filing the report;

(2) The calendar year covered by the report;

(3) The name and site address of each foreign receiving facility;

(i) A description of the hazardous waste;

(ii) The applicable EPA hazardous waste code(s) (from 40 CFR part 261, subpart C or D) for each waste;

(iii) The applicable waste code from the appropriate OECD waste list incorporated by reference in 40 CFR 260.11;

(iv) The applicable DOT ID number;

(v) The name and U.S. EPA ID number (where applicable) for each transporter used over the calendar year covered by the report; and

(vi) The consent number(s) under which the hazardous waste was shipped, and for each consent number, the total amount of the hazardous waste and the number of shipments exported during the calendar year covered by the report;

(5) In even numbered years, for each hazardous waste exported, except for hazardous waste produced by exporters of greater than 100kg but less than 1,000kg in a calendar month, and except for hazardous waste for which information was already provided pursuant to § 262.41:

(i) A description of the efforts undertaken during the year to reduce the volume and toxicity of the waste generated; and

(ii) A description of the changes in volume and toxicity of the waste actually achieved during the year in comparison to previous years to the extent such information is available for years prior to 1984; and

(g) The exporter shall file an annual report with the EPA no later than March 1 of each year summarizing the types, quantities, frequency, and ultimate destination of all such hazardous waste exported during the previous calendar year. The exporter must submit annual reports to the EPA using the allowable methods specified in paragraph (b)(1) of this section. The annual report must include all of the following paragraphs (g)(1) through (6) of this section specified as follows:

(1) The EPA identification number, name, and mailing and site address of the exporter filing the report;

(2) The calendar year covered by the report;

(3) The name and site address of each foreign receiving facility;

(i) A description of the hazardous waste;

(ii) The applicable EPA hazardous waste code(s) (from 40 CFR part 261, subpart C or D) for each waste;

(iii) The applicable waste code from the appropriate OECD waste list incorporated by reference in 40 CFR 260.11;

(iv) The applicable DOT ID number;

(v) The name and U.S. EPA ID number (where applicable) for each transporter used over the calendar year covered by the report; and

(vi) The consent number(s) under which the hazardous waste was shipped, and for each consent number, the total amount of the hazardous waste and the number of shipments exported during the calendar year covered by the report;

(5) In even numbered years, for each hazardous waste exported, except for hazardous waste produced by exporters of greater than 100kg but less than 1,000kg in a calendar month, and except for hazardous waste for which information was already provided pursuant to § 262.41:

(i) A description of the efforts undertaken during the year to reduce the volume and toxicity of the waste generated; and

(ii) A description of the changes in volume and toxicity of the waste actually achieved during the year in comparison to previous years to the extent such information is available for years prior to 1984; and

(g) The exporter shall file an annual report with the EPA no later than March 1 of each year summarizing the types, quantities, frequency, and ultimate destination of all such hazardous waste exported during the previous calendar year. The exporter must submit annual reports to the EPA using the allowable methods specified in paragraph (b)(1) of this section. The annual report must include all of the following paragraphs (g)(1) through (6) of this section specified as follows:

(1) The EPA identification number, name, and mailing and site address of the exporter filing the report;

(2) The calendar year covered by the report;

(3) The name and site address of each foreign receiving facility;

(i) A description of the hazardous waste;

(ii) The applicable EPA hazardous waste code(s) (from 40 CFR part 261, subpart C or D) for each waste;

(iii) The applicable waste code from the appropriate OECD waste list incorporated by reference in 40 CFR 260.11;

(iv) The applicable DOT ID number;

(v) The name and U.S. EPA ID number (where applicable) for each transporter used over the calendar year covered by the report; and

(vi) The consent number(s) under which the hazardous waste was shipped, and for each consent number, the total amount of the hazardous waste and the number of shipments exported during the calendar year covered by the report;

(5) In even numbered years, for each hazardous waste exported, except for hazardous waste produced by exporters of greater than 100kg but less than 1,000kg in a calendar month, and except for hazardous waste for which information was already provided pursuant to § 262.41:

(i) A description of the efforts undertaken during the year to reduce the volume and toxicity of the waste generated; and

(ii) A description of the changes in volume and toxicity of the waste actually achieved during the year in comparison to previous years to the extent such information is available for years prior to 1984; and

(g) The exporter shall file an annual report with the EPA no later than March 1 of each year summarizing the types, quantities, frequency, and ultimate destination of all such hazardous waste exported during the previous calendar year. The exporter must submit annual reports to the EPA using the allowable methods specified in paragraph (b)(1) of this section. The annual report must include all of the following paragraphs (g)(1) through (6) of this section specified as follows:

(1) The EPA identification number, name, and mailing and site address of the exporter filing the report;

(2) The calendar year covered by the report;

(3) The name and site address of each foreign receiving facility;

(i) A description of the hazardous waste;

(ii) The applicable EPA hazardous waste code(s) (from 40 CFR part 261, subpart C or D) for each waste;

(iii) The applicable waste code from the appropriate OECD waste list incorporated by reference in 40 CFR 260.11;

(iv) The applicable DOT ID number;

(v) The name and U.S. EPA ID number (where applicable) for each transporter used over the calendar year covered by the report; and

(vi) The consent number(s) under which the hazardous waste was shipped, and for each consent number, the total amount of the hazardous waste and the number of shipments exported during the calendar year covered by the report;

(5) In even numbered years, for each hazardous waste exported, except for hazardous waste produced by exporters of greater than 100kg but less than 1,000kg in a calendar month, and except for hazardous waste for which information was already provided pursuant to § 262.41:

(i) A description of the efforts undertaken during the year to reduce the volume and toxicity of the waste generated; and

(ii) A description of the changes in volume and toxicity of the waste actually achieved during the year in comparison to previous years to the extent such information is available for years prior to 1984; and

(g) The exporter shall file an annual report with the EPA no later than March 1 of each year summarizing the types, quantities, frequency, and ultimate destination of all such hazardous waste exported during the previous calendar year. The exporter must submit annual reports to the EPA using the allowable methods specified in paragraph (b)(1) of this section. The annual report must include all of the following paragraphs (g)(1) through (6) of this section specified as follows:

(1) The EPA identification number, name, and mailing and site address of the exporter filing the report;

(2) The calendar year covered by the report;

(3) The name and site address of each foreign receiving facility;

(i) A description of the hazardous waste;

(ii) The applicable EPA hazardous waste code(s) (from 40 CFR part 261, subpart C or D) for each waste;

(iii) The applicable waste code from the appropriate OECD waste list incorporated by reference in 40 CFR 260.11;

(iv) The applicable DOT ID number;

(v) The name and U.S. EPA ID number (where applicable) for each transporter used over the calendar year covered by the report; and

(vi) The consent number(s) under which the hazardous waste was shipped, and for each consent number, the total amount of the hazardous waste and the number of shipments exported during the calendar year covered by the report;

(5) In even numbered years, for each hazardous waste exported, except for hazardous waste produced by exporters of greater than 100kg but less than 1,000kg in a calendar month, and except for hazardous waste for which information was already provided pursuant to § 262.41:

(i) A description of the efforts undertaken during the year to reduce the volume and toxicity of the waste generated; and

(ii) A description of the changes in volume and toxicity of the waste actually achieved during the year in comparison to previous years to the extent such information is available for years prior to 1984; and

(g) The exporter shall file an annual report with the EPA no later than March 1 of each year summarizing the types, quantities, frequency, and ultimate destination of all such hazardous waste exported during the previous calendar year. The exporter must submit annual reports to the EPA using the allowable methods specified in paragraph (b)(1) of this section. The annual report must include all of the following paragraphs (g)(1) through (6) of this section specified as follows:

(1) The EPA identification number, name, and mailing and site address of the exporter filing the report;

(2) The calendar year covered by the report;

(3) The name and site address of each foreign receiving facility;

(i) A description of the hazardous waste;

(ii) The applicable EPA hazardous waste code(s) (from 40 CFR part 261, subpart C or D) for each waste;

(iii) The applicable waste code from the appropriate OECD waste list incorporated by reference in 40 CFR 260.11;

(iv) The applicable DOT ID number;

(v) The name and U.S. EPA ID number (where applicable) for each transporter used over the calendar year covered by the report; and

(vi) The consent number(s) under which the hazardous waste was shipped, and for each consent number, the total amount of the hazardous waste and the number of shipments exported during the calendar year covered by the report;

(5) In even numbered years, for each hazardous waste exported, except for hazardous waste produced by exporters of greater than 100kg but less than 1,000kg in a calendar month, and except for hazardous waste for which information was already provided pursuant to § 262.41:

(i) A description of the efforts undertaken during the year to reduce the volume and toxicity of the waste generated; and

(ii) A description of the changes in volume and toxicity of the waste actually achieved during the year in comparison to previous years to the extent such information is available for years prior to 1984; and