§261.196. Response to leaks or spills and disposition of leaking or unfit-for-use tank systems. — Inbound Citations

40 C.F.R. § 261.196

Statutory Authority

Cited by 5 regulations in release Current.

40 C.F.R. § 261.191(c)

Go to provision →

(c) If, as a result of the assessment conducted in accordance with paragraph (a) of this section, a tank system is found to be leaking or unfit for use, the remanufacturer or other person that stores or treats the hazardous secondary material must comply with the requirements of § 261.196.
40 C.F.R. § 261.194(c)

Go to provision →

(c) The remanufacturer or other person that stores or treats the hazardous secondary material must comply with the requirements of § 261.196 of this subpart if a leak or spill occurs in the tank system.

40 C.F.R. § 261.196(e)(1)

Go to provision →

(1) Unless the remanufacturer or other person that stores or treats the hazardous secondary material satisfies the requirements of paragraphs (e)(2) through (4) of this section, the tank system must cease to operate under the remanufacturing exclusion at 40 CFR 261.4(a)(27).

40 C.F.R. § 261.196(e)(1)

Go to provision →

(1) Unless the remanufacturer or other person that stores or treats the hazardous secondary material satisfies the requirements of paragraphs (e)(2) through (4) of this section, the tank system must cease to operate under the remanufacturing exclusion at 40 CFR 261.4(a)(27).

40 C.F.R. § 261.196(e)(1)

Go to provision →

(1) Unless the remanufacturer or other person that stores or treats the hazardous secondary material satisfies the requirements of paragraphs (e)(2) through (4) of this section, the tank system must cease to operate under the remanufacturing exclusion at 40 CFR 261.4(a)(27).