§261.194. General operating requirements.
40 C.F.R. § 261.194
Hazardous secondary materials or treatment reagents must not be placed in a tank system if they could cause the tank, its ancillary equipment, or the containment system to rupture, leak, corrode, or otherwise fail.
The remanufacturer or other person that stores or treats the hazardous secondary material must use appropriate controls and practices to prevent spills and overflows from tank or containment systems. These include at a minimum:
Spill prevention controls (e.g., check valves, dry disconnect couplings);
Overfill prevention controls (e.g., level sensing devices, high level alarms, automatic feed cutoff, or bypass to a standby tank); and
Maintenance of sufficient freeboard in uncovered tanks to prevent overtopping by wave or wind action or by precipitation.
The remanufacturer or other person that stores or treats the hazardous secondary material must comply with the requirements of § 261.196 of this subpart if a leak or spill occurs in the tank system.
Notes, amendments, and revision history
Source
Source: 80 FR 1777, Jan. 13, 2015, unless otherwise noted.
Authority
Authority: 42 U.S.C. 6905, 6912(a), 6921, 6922, 6924(y) and 6938.
Source
Source: 45 FR 33119, May 19, 1980, unless otherwise noted.