§3030.161. Density calculation data sources. — Inbound Citations

(a) This subpart allocates rate authority to address the effects of decreases in the density of mail as measured by the sources identified in § 3030.161. The calculation of the additional rate authority corresponding to the change in density is described in § 3030.162.

(a) The data needed for the calculation of the density rate authority in § 3030.162 shall be obtained from the values reported by the Postal Service as specified in paragraphs (b) through (d) of this section. When both originally filed and annually revised data are available, the originally filed data shall be used. When the originally filed data are corrected through a refiling or in the Commission's Annual Compliance Determination report, the corrected version of the originally filed data shall be used.

(a) The data needed for the calculation of the density rate authority in § 3030.162 shall be obtained from the values reported by the Postal Service as specified in paragraphs (b) through (d) of this section. When both originally filed and annually revised data are available, the originally filed data shall be used. When the originally filed data are corrected through a refiling or in the Commission's Annual Compliance Determination report, the corrected version of the originally filed data shall be used.

(a) The data needed for the calculation of the density rate authority in § 3030.162 shall be obtained from the values reported by the Postal Service as specified in paragraphs (b) through (d) of this section. When both originally filed and annually revised data are available, the originally filed data shall be used. When the originally filed data are corrected through a refiling or in the Commission's Annual Compliance Determination report, the corrected version of the originally filed data shall be used.