§1.84. Standards for drawings. — Inbound Citations

(b) The provisions of § 1.74, § 1.84, except for § 1.84(c), and §§ 1.152 through 1.154 shall not apply to international design applications.

(d) One or more application drawings shall be amended in the following manner: Any changes to an application drawing must be in compliance with § 1.84 or, for a nonprovisional international design application, in compliance with §§ 1.84(c) and 1.1026 and must be submitted on a replacement sheet of drawings which shall be an attachment to the amendment document and, in the top margin, labeled “Replacement Sheet.” Any replacement sheet of drawings shall include all of the figures appearing on the immediate prior version of the sheet, even if only one figure is amended. Any new sheet of drawings containing an additional figure must be labeled in the top margin as “New Sheet.” All changes to the drawings shall be explained, in detail, in either the drawing amendment or remarks section of the amendment paper.

(1) A marked-up copy of any amended drawing figure, including annotations indicating the changes made, may be included. The marked-up copy must be clearly labeled as “Annotated Sheet” and must be presented in the amendment or remarks section that explains the change to the drawings.

(2) A marked-up copy of any amended drawing figure, including annotations indicating the changes made, must be provided when required by the examiner.

The design must be represented by a drawing that complies with the requirements of § 1.84 and must contain a sufficient number of views to constitute a complete disclosure of the appearance of the design. Appropriate and adequate surface shading should be used to show the character or contour of the surfaces represented. Solid black surface shading is not permitted except when used to represent the color black as well as color contrast. Broken lines may be used to show visible environmental structure, but may not be used to show hidden planes and surfaces that cannot be seen through opaque materials. Alternate positions of a design component, illustrated by full and broken lines in the same view are not permitted in a design drawing. Photographs and ink drawings are not permitted to be combined as formal drawings in one application. Photographs submitted in lieu of ink drawings in design patent applications must not disclose environmental structure but must be limited to the design claimed for the article.

(a) Plant patent drawings should be artistically and competently executed and must comply with the requirements of § 1.84. View numbers and reference characters need not be employed unless required by the examiner. The drawing must disclose all the distinctive characteristics of the plant capable of visual representation.

(2) Applicant must submit a clean copy of each drawing sheet of the printed patent at the time the reissue application is filed. If such copy complies with § 1.84, no further drawings will be required. Where a drawing of the reissue application is to include any changes relative to the patent being reissued, the changes to the drawing must be made in accordance with paragraph (b)(3) of this section. The Office will not transfer the drawings from the patent file to the reissue application.

(c) An application filed under 35 U.S.C. 111(a) will not be published until it includes the basic filing fee (§ 1.16(a) or (c)) and any English translation required by § 1.52(d). The Office may delay publishing any application until it includes any application size fee required by the Office under § 1.16(s) or § 1.492(j), a specification having papers in compliance with § 1.52 and an abstract (§ 1.72(b)), drawings in compliance with § 1.84, a “Sequence Listing” in compliance with §§ 1.821 through 1.825 (if applicable) for an application filed before July 1, 2022, a “Sequence Listing XML” in compliance with §§ 1.831 through 1.835 (if applicable) for an application filed on or after July 1, 2022, and the inventor's oath or declaration or application data sheet containing the information specified in § 1.63(b).

(3) Drawings, when necessary, see §§ 1.81 to 1.85; and

(4) See § 1.58 for chemical and mathematical formulae and tables, and § 1.84 for drawings.

(3) Any change to the patent drawings must be submitted as a sketch on a separate paper showing the proposed changes in red for approval by the examiner. Upon approval of the changes by the examiner, only new sheets of drawings including the changes and in compliance with § 1.84 must be filed. Amended figures must be identified as “Amended,” and any added figure must be identified as “New.” In the event a figure is canceled, the figure must be surrounded by brackets and identified as “Canceled.”

(4) Color drawings submitted under §§ 1.81, 1.83 through 1.85, 1.152, 1.165, 1.173, 1.437, or 1.1026;

(f) An application filed under 35 U.S.C. 111(a) is in condition for examination when it includes a specification, including at least one claim and an abstract (§ 1.72(b)), and has papers in compliance with § 1.52, drawings (if any) in compliance with § 1.84, any English translation required by § 1.52(d) or § 1.57(a), a “Sequence Listing” in compliance with §§ 1.821 through 1.825 (if applicable), a “Sequence Listing XML” in compliance with §§ 1.831 through 1.835 (if applicable), an inventor's oath or declaration or an application data sheet containing the information specified in § 1.63(b), the basic filing fee (§ 1.16(a) or (c)), the search fee (§ 1.16(k) or (m)), the examination fee (§ 1.16(o) or (q)), any certified copy of the previously filed application required by § 1.57(a), and any application size fee required by the Office under § 1.16(s). An international application is in condition for examination when it has entered the national stage as defined in § 1.491(b), and includes a specification, including at least one claim and an abstract (§ 1.72(b)), and has papers in compliance with § 1.52, drawings (if any) in compliance with § 1.84, a “Sequence Listing” in compliance with §§ 1.821 through 1.825 (if applicable), a “Sequence Listing XML” in compliance with §§ 1.831 through 1.835 (if applicable), an inventor's oath or declaration or an application data sheet containing the information specified in § 1.63(b), the search fee (§ 1.492(b)), the examination fee (§ 1.492(c)), and any application size fee required by the Office under § 1.492(j). An application shall be considered as having papers in compliance with § 1.52, drawings (if any) in compliance with § 1.84, and a “Sequence Listing” in compliance with §§ 1.821 through 1.825 (if applicable), or a “Sequence Listing XML” in compliance with §§ 1.831 through 1.835 (if applicable), for purposes of this paragraph (f) on the filing date of the latest reply (if any) correcting the papers, drawings, “Sequence Listing,” or “Sequence Listing XML” that is prior to the date of mailing of either an action under 35 U.S.C. 132 or a notice of allowance under 35 U.S.C. 151, whichever occurs first.

(a) A utility or plant application will not be placed on the files for examination until objections to the drawings have been corrected. Except as provided in § 1.215(c), any patent application publication will not include drawings filed after the application has been placed on the files for examination. Unless applicant is otherwise notified in an Office action, objections to the drawings in a utility or plant application will not be held in abeyance, and a request to hold objections to the drawings in abeyance will not be considered a bona fide attempt to advance the application to final action (§ 1.135(c)). If a drawing in a design application meets the requirements of § 1.84(e), (f), and (g) and is suitable for reproduction, but is not otherwise in compliance with § 1.84, the drawing may be admitted for examination.

(1) Substantially conforms to the requirements of § 1.52 or § 1.84;

(b) Applicant is responsible for retaining the actual model, exhibit, or specimen for the enforceable life of any patent resulting from the application. The provisions of this paragraph do not apply to a model or exhibit that substantially conforms to the requirements of § 1.52 or § 1.84, where the model or exhibit has been described by photographs that substantially conform to § 1.84, or where the model, exhibit or specimen is perishable.

(1) If the listing is submitted as drawings, it must be submitted in the manner and complying with the requirements for drawings as provided in § 1.84. At least one figure numeral is required on each sheet of drawing.

(b) The provisions of § 1.74, § 1.84, except for § 1.84(c), and §§ 1.152 through 1.154 shall not apply to international design applications.

(d) One or more application drawings shall be amended in the following manner: Any changes to an application drawing must be in compliance with § 1.84 or, for a nonprovisional international design application, in compliance with §§ 1.84(c) and 1.1026 and must be submitted on a replacement sheet of drawings which shall be an attachment to the amendment document and, in the top margin, labeled “Replacement Sheet.” Any replacement sheet of drawings shall include all of the figures appearing on the immediate prior version of the sheet, even if only one figure is amended. Any new sheet of drawings containing an additional figure must be labeled in the top margin as “New Sheet.” All changes to the drawings shall be explained, in detail, in either the drawing amendment or remarks section of the amendment paper.

(1) A marked-up copy of any amended drawing figure, including annotations indicating the changes made, may be included. The marked-up copy must be clearly labeled as “Annotated Sheet” and must be presented in the amendment or remarks section that explains the change to the drawings.

(2) A marked-up copy of any amended drawing figure, including annotations indicating the changes made, must be provided when required by the examiner.

(a) A utility or plant application will not be placed on the files for examination until objections to the drawings have been corrected. Except as provided in § 1.215(c), any patent application publication will not include drawings filed after the application has been placed on the files for examination. Unless applicant is otherwise notified in an Office action, objections to the drawings in a utility or plant application will not be held in abeyance, and a request to hold objections to the drawings in abeyance will not be considered a bona fide attempt to advance the application to final action (§ 1.135(c)). If a drawing in a design application meets the requirements of § 1.84(e), (f), and (g) and is suitable for reproduction, but is not otherwise in compliance with § 1.84, the drawing may be admitted for examination.

(a) A utility or plant application will not be placed on the files for examination until objections to the drawings have been corrected. Except as provided in § 1.215(c), any patent application publication will not include drawings filed after the application has been placed on the files for examination. Unless applicant is otherwise notified in an Office action, objections to the drawings in a utility or plant application will not be held in abeyance, and a request to hold objections to the drawings in abeyance will not be considered a bona fide attempt to advance the application to final action (§ 1.135(c)). If a drawing in a design application meets the requirements of § 1.84(e), (f), and (g) and is suitable for reproduction, but is not otherwise in compliance with § 1.84, the drawing may be admitted for examination.

(a) A utility or plant application will not be placed on the files for examination until objections to the drawings have been corrected. Except as provided in § 1.215(c), any patent application publication will not include drawings filed after the application has been placed on the files for examination. Unless applicant is otherwise notified in an Office action, objections to the drawings in a utility or plant application will not be held in abeyance, and a request to hold objections to the drawings in abeyance will not be considered a bona fide attempt to advance the application to final action (§ 1.135(c)). If a drawing in a design application meets the requirements of § 1.84(e), (f), and (g) and is suitable for reproduction, but is not otherwise in compliance with § 1.84, the drawing may be admitted for examination.

(d) A copyright or mask work notice may be placed in a design or utility patent application adjacent to copyright and mask work material contained therein. The notice may appear at any appropriate portion of the patent application disclosure. For notices in drawings, see § 1.84(s). The content of the notice must be limited to only those elements provided for by law. For example, “© 1983 John Doe” (17 U.S.C. 401) and “ M John Doe” (17 U.S.C. 909) would be properly limited and, under current statutes, legally sufficient notices of copyright and mask work, respectively. Inclusion of a copyright or mask work notice will be permitted only if the authorization language set forth in paragraph (e) of this section is included at the beginning (preferably as the first paragraph) of the specification.