§183.560. Hose clamps: Installation.
33 C.F.R. § 183.560
Each hose clamp on a hose from the fuel tank to the fuel inlet connection on the engine, a hose between the fuel pump and the carburetor, or a vent line must:
Be used with hose designed for clamps;
[Reserved]
Be beyond the bead, flare, or over the serrations of the mating spud, pipe, or hose fitting; and
Not depend solely on the spring tension of the clamp for compressive force.
Notes, amendments, and revision history
Amendments
[CGD 74-209, 42 FR 5950, Jan. 31, 1977, as amended by CGD 81-092, 48 FR 55737, Dec. 15, 1983]
Source
Source: CGD 74-209, 42 FR 5950, Jan. 31, 1977, unless otherwise noted.
Authority
Authority: 46 U.S.C. 4302; Pub. L. 103-206, 107 Stat. 2439; and Department of Homeland Security Delegation No. 0170.1, para. II, (92)(b). Subpart E is also authorized by Pub. L. 114-120, 130 Stat. 27
Source
Source: CGD 72-61R, 37 FR 15782, Aug. 4, 1972, unless otherwise noted.
Amendments
[CGD 74-209, 42 FR 5950, Jan. 31, 1977, as amended by CGD 81-092, 48 FR 55737, Dec. 15, 1983]