§183.530. Spud, pipe, and hose fitting configuration.
33 C.F.R. § 183.530
Except when used for a tank fill line, each spud, pipe, or hose fitting used with hose clamps must have:
A bead;
A flare; or
A series of annular grooves or serrations no less than 0.015 inches deep, except a continuous helical thread, knurl, or groove.
Notes, amendments, and revision history
Amendments
[CGD 74-209, 42 FR 5950, Jan. 31, 1977, as amended by USCG-1999-5832, 64 FR 34716, June 29, 1999]
Source
Source: CGD 74-209, 42 FR 5950, Jan. 31, 1977, unless otherwise noted.
Authority
Authority: 46 U.S.C. 4302; Pub. L. 103-206, 107 Stat. 2439; and Department of Homeland Security Delegation No. 0170.1, para. II, (92)(b). Subpart E is also authorized by Pub. L. 114-120, 130 Stat. 27
Source
Source: CGD 72-61R, 37 FR 15782, Aug. 4, 1972, unless otherwise noted.
Amendments
[CGD 74-209, 42 FR 5950, Jan. 31, 1977, as amended by USCG-1999-5832, 64 FR 34716, June 29, 1999]