US Codex
C.F.R.
Browse by date

View an earlier version

Latest
2026-08-27
Browse all versions by date
Notes

30 C.F.R. §§ 46.3–46.10

8 sections in range

§46.3. Training plans.

30 C.F.R. § 46.3

(a)
You must develop and implement a written plan, approved by us under either paragraph (b) or (c) of this section, that contains effective programs for training new miners and newly hired experienced miners, training miners for new tasks, annual refresher training, and site-specific hazard awareness training.
(b)
A training plan is considered approved by us if it contains, at a minimum, the following information—
(1)
The name of the production-operator or independent contractor, mine name(s), and MSHA mine identification number(s) or independent contractor identification number(s);
(2)
The name and position of the person designated by you who is responsible for the health and safety training at the mine. This person may be the production-operator or independent contractor;
(3)
A general description of the teaching methods and the course materials that are to be used in the training program, including the subject areas to be covered and the approximate time or range of time to be spent on each subject area.
(4)
A list of the persons and/or organizations who will provide the training, and the subject areas in which each person and/or organization is competent to instruct; and
(5)
The evaluation procedures used to determine the effectiveness of training.
(c)
A plan that does not include the minimum information specified in paragraphs (b)(1) through (b)(5) of this section must be submitted to and approved by the Regional Manager, Educational Field Services Division, or designee, for the region in which the mine is located. You also may voluntarily submit a plan for Regional Manager approval. You must notify miners or their representatives when you submit a plan for Regional Manager approval. Within two weeks of receipt or posting of the plan, miners and their representatives may also request review and approval of the plan by the Regional Manager and must notify the production-operator or independent contractor of such request.
(d)
You must provide the miners' representative, if any, with a copy of the plan at least 2 weeks before the plan is implemented or, if you request MSHA approval of your plan, at least two weeks before you submit the plan to the Regional Manager for approval. At mines where no miners' representative has been designated, you must post a copy of the plan at the mine or provide a copy to each miner at least 2 weeks before you implement the plan or submit it to the Regional Manager for approval.
(e)
Within 2 weeks following the receipt or posting of the training plan under paragraph (d) of this section, miners or their representatives may submit written comments on the plan to you, or to the Regional Manager, as appropriate.
(f)
The Regional Manager must notify you and miners or their representatives in writing of the approval, or status of the approval, of the training plan within 30 calendar days of the date we received the training plan for approval, or within 30 calendar days of the date we received the request by a miner or miners' representative that we approve your plan.
(g)
You must provide the miners' representative, if any, with a copy of the approved plan within one week after approval. At mines where no miners' representative has been designated, you must post a copy of the plan at the mine or provide a copy to each miner within one week after approval.
(h)
If you, miners, or miners' representatives wish to appeal a decision of the Regional Manager, you must send the appeal, in writing, to the Director for Educational Policy and Development, MSHA, 200 Constitution Avenue NW, Washington, DC 20210, within 30 calendar days after notification of the Regional Manager's decision. The Director will issue a final decision of the Agency within 30 calendar days after receipt of the appeal.
(i)
You must make available at the mine a copy of the current training plan for inspection by us and for examination by miners and their representatives. If the training plan is not maintained at the mine, you must have the capability to provide the plan within one business day upon request by us, miners, or their representatives.
(j)
You must comply with the procedures for plan approval under this section whenever the plan undergoes revisions.
(k)
The addresses for the EFS Regional Managers are as follows. Current information on the EFS organization is available on MSHA's Internet Home Page at http://www.msha.gov.
Notes, amendments, and revision history

Amendments

[64 FR 53130, Sept. 30, 1999, as amended at 67 FR 38384, June 4, 2002; 80 FR 52986, Sept. 2, 2015; 91 FR 9447, Feb. 26, 2026]

Authority

Authority: 30 U.S.C. 811, 825.

Source

Source: 64 FR 53130, Sept. 30, 1999, unless otherwise noted.

Amendments

[64 FR 53130, Sept. 30, 1999, as amended at 67 FR 38384, June 4, 2002; 80 FR 52986, Sept. 2, 2015; 91 FR 9447, Feb. 26, 2026]

§46.4. Training plan implementation.

30 C.F.R. § 46.4

(a)
You must ensure that each program, course of instruction, or training session is:
(1)
Conducted in accordance with the written training plan;
(2)
Presented by a competent person; and
(3)
Presented in language understood by the miners who are receiving the training.
(b)
You may conduct your own training programs or may arrange for training to be conducted by: state or federal agencies; associations of production-operators or independent contractors; miners' representatives; consultants; manufacturers' representatives; private associations; educational institutions; or other training providers.
(c)
You may substitute, as applicable, health and safety training required by the Occupational Safety and Health Administration (OSHA), or other federal or state agencies to meet requirements under this part. This training must be relevant to training subjects required in this part. You must document the training in accordance with § 46.9 of this part.
(d)
Training methods may consist of classroom instruction, instruction at the mine, interactive computer-based instruction or other innovative training methods, alternative training technologies, or any combination of training methods.
(e)
Employee health and safety meetings, including informal health and safety talks and instruction, may be credited under this part toward either new miner training, newly hired experienced miner training, or annual refresher training requirements, as appropriate, provided that you document each training session in accordance with § 46.9 of this part. In recording the duration of training, you must include only the portion of the session actually spent in training.
Notes, amendments, and revision history

Authority

Authority: 30 U.S.C. 811, 825.

Source

Source: 64 FR 53130, Sept. 30, 1999, unless otherwise noted.

§46.5. New miner training.

30 C.F.R. § 46.5

(a)
Except as provided in paragraphs (f) and (g) of this section, you must provide each new miner with no less than 24 hours of training as prescribed by paragraphs (b), (c), and (d). Miners who have not yet received the full 24 hours of new miner training must work where an experienced miner can observe that the new miner is performing his or her work in a safe and healthful manner.
(e)
Practice under the close observation of a competent person may be used to fulfill the requirement for training on the health and safety aspects of an assigned task in paragraph (b)(4) of this section, if hazard recognition training specific to the assigned task is given before the miner performs the task.
(f)
A new miner who has less than 12 cumulative months of surface mining or equivalent experience and has completed new miner training under this section or under § 48.25 of this title within 36 months before beginning work at the mine does not have to repeat new miner training. However, you must provide the miner with training specified in paragraph (b) of this section before the miner begins work at the mine.
(g)
A new miner training course completed under § 48.5 or § 48.25 of this title may be used to satisfy the requirements of paragraphs (a), (b), and (c) of this section, if the course was completed by the miner within 36 months before beginning work at the mine; and the course is relevant to the subjects specified in paragraphs (b) and (c) of this section.
Notes, amendments, and revision history

Amendments

[64 FR 53130, Sept. 30, 1999, as amended at 67 FR 42382, June 21, 2002]

Authority

Authority: 30 U.S.C. 811, 825.

Source

Source: 64 FR 53130, Sept. 30, 1999, unless otherwise noted.

Amendments

[64 FR 53130, Sept. 30, 1999, as amended at 67 FR 42382, June 21, 2002]

§46.6. Newly hired experienced miner training.

30 C.F.R. § 46.6

(a)
Except as provided in paragraph (f) of this section, you must provide each newly hired experienced miner with training as prescribed by paragraphs (b) and (c).
(d)
Practice under the close observation of a competent person may be used to fulfill the requirement for training on the health and safety aspects of an assigned task in paragraph (b)(4) of this section, if hazard recognition training specific to the assigned task is given before the miner performs the task.
(e)
In addition to subjects specified in paragraphs (b) and (c) of this section, you may provide training on any other subjects that promote occupational health and safety for miners.
(f)
You are not required to provide a newly hired experienced miner who returns to the same mine, following an absence of 12 months or less, with the training specified in paragraphs (b) and (c) of this section. Instead you must provide such miner with training on any changes at the mine that occurred during the miner's absence that could adversely affect the miner's health or safety. This training must be given before the miner begins work at the mine. If the miner missed any part of annual refresher training under § 46.8 of this part during the absence, you must provide the miner with the missed training no later than 90 calendar days after the miner begins work at the mine.
Notes, amendments, and revision history

Amendments

[64 FR 53130, Sept. 30, 1999, as amended at 67 FR 42382, June 21, 2002]

Authority

Authority: 30 U.S.C. 811, 825.

Source

Source: 64 FR 53130, Sept. 30, 1999, unless otherwise noted.

Amendments

[64 FR 53130, Sept. 30, 1999, as amended at 67 FR 42382, June 21, 2002]

§46.7. New task training.

30 C.F.R. § 46.7

(a)
You must provide any miner who is reassigned to a new task in which he or she has no previous work experience with training in the health and safety aspects of the task to be assigned, including the safe work procedures of such task, information about the physical and health hazards of chemicals in the miner's work area, the protective measures a miner can take against these hazards, and the contents of the mine's HazCom program. This training must be provided before the miner performs the new task.
(b)
If a change occurs in a miner's assigned task that affects the health and safety risks encountered by the miner, you must provide the miner with training under paragraph (a) of this section that addresses the change.
(c)
You are not required to provide new task training under paragraphs (a) and (b) of this section to miners who have received training in a similar task or who have previous work experience in the task, and who can demonstrate the necessary skills to perform the task in a safe and healthful manner. To determine whether task training under this section is required, you must observe that the miner can perform the task in a safe and healthful manner.
(d)
Practice under the close observation of a competent person may be used to fulfill the requirement for task training under this section, if hazard recognition training specific to the assigned task is given before the miner performs the task.
(e)
Training provided under this section may be credited toward new miner training, as appropriate.
Notes, amendments, and revision history

Amendments

[64 FR 53130, Sept. 30, 1999, as amended at 67 FR 42382, June 21, 2002]

Authority

Authority: 30 U.S.C. 811, 825.

Source

Source: 64 FR 53130, Sept. 30, 1999, unless otherwise noted.

Amendments

[64 FR 53130, Sept. 30, 1999, as amended at 67 FR 42382, June 21, 2002]

§46.8. Annual refresher training.

30 C.F.R. § 46.8

(a)
You must provide each miner with no less than 8 hours of annual refresher training—
(1)
No later than 12 months after the miner begins work at the mine, or no later than March 30, 2001, whichever is later; and
(2)
Thereafter, no later than 12 months after the previous annual refresher training was completed.
(b)
The refresher training must include instruction on changes at the mine that could adversely affect the miner's health or safety.
(c)
Refresher training must also address other health and safety subjects that are relevant to mining operations at the mine. Recommended subjects include, but are not limited to: applicable health and safety requirements, including mandatory health and safety standards; information about the physical and health hazards of chemicals in the miner's work area, the protective measures a miner can take against these hazards, and the contents of the mine's HazCom program; transportation controls and communication systems; escape and emergency evacuation plans, firewarning and firefighting; ground conditions and control; traffic patterns and control; working in areas of highwalls; water hazards, pits, and spoil banks; illumination and night work; first aid; electrical hazards; prevention of accidents; health; explosives; and respiratory devices. Training is also recommended on the hazards associated with the equipment that has accounted for the most fatalities and serious injuries at the mines covered by this rule, including: mobile equipment (haulage and service trucks, front-end loaders and tractors); conveyor systems; cranes; crushers; excavators; and dredges. Other recommended subjects include: maintenance and repair (use of hand tools and welding equipment); material handling; fall prevention and protection; and working around moving objects (machine guarding).
Notes, amendments, and revision history

Amendments

[64 FR 53130, Sept. 30, 1999, as amended at 67 FR 42382, June 21, 2002]

Authority

Authority: 30 U.S.C. 811, 825.

Source

Source: 64 FR 53130, Sept. 30, 1999, unless otherwise noted.

Amendments

[64 FR 53130, Sept. 30, 1999, as amended at 67 FR 42382, June 21, 2002]

§46.9. Records of training.

30 C.F.R. § 46.9

(a)
You must record and certify on MSHA Form 5000-23, or on a form that contains the information listed in paragraph (b) of this section, that each miner has received training required under this part.
(b)
The form must include:
(1)
The printed full name of the person trained;
(2)
The type of training, the duration of the training, the date the training was received, the name of the competent person who provided the training:
(3)
The name of the mine or independent contractor, MSHA mine identification number or independent contractor identification number, and location of training (if an institution, the name and address of the institution).
(4)
The statement, “False certification is punishable under § 110(a) and (f) of the Federal Mine Safety and Health Act,” printed in bold letters and in a conspicuous manner; and
(5)
A statement signed by the person designated in the MSHA-approved training plan for the mine as responsible for health and safety training, that states “I certify that the above training has been completed.”
(c)
You must make a record of training under paragraphs (b)(1) through (b)(4) of this section—
(1)
For new miner training under § 46.5, no later than—
(i)
when the miner begins work at the mine as required under § 46.5(b);
(ii)
60 calendar days after the miner begins work at the mine as required under § 46.5(c); and
(iii)
90 calendar days after the miner begins work at the mine as required under § 46.5(d), if applicable.
(2)
For newly hired experienced miner training under § 46.6, no later than—
(i)
when the miner begins work at the mine; and
(ii)
60 calendar days after the miner begins work at the mine.
(3)
Upon completion of new task training under § 46.7;
(4)
After each session of annual refresher training under § 46.8; and
(5)
Upon completion by miners of site-specific hazard awareness training under § 46.11.
(d)
You must ensure that all records of training under paragraphs (c)(1) through (c)(5) of this section are certified under paragraph (b)(5) of this section and a copy provided to the miner—
(1)
Upon completion of the 24 hours of new miner training;
(2)
Upon completion of newly hired experienced miner training;
(3)
At least once every 12 months for new task training, or upon request by the miner, if applicable;
(4)
Upon completion of the 8 hours of annual refresher training; and
(5)
Upon completion by miners of site-specific hazard awareness training.
(e)
False certification that training was completed is punishable under § 110(a) and (f) of the Act.
(f)
When a miner leaves your employ, you must provide each miner with a copy of his or her training records and certificates upon request.
(g)
You must make available at the mine a copy of each miner's training records and certificates for inspection by us and for examination by miners and their representatives. If training certificates are not maintained at the mine, you must be able to provide the certificates upon request by us, miners, or their representatives.
(h)
You must maintain copies of training certificates and training records for each currently employed miner during his or her employment, except records and certificates of annual refresher training under § 46.8, which you must maintain for only two years. You must maintain copies of training certificates and training records for at least 60 calendar days after a miner terminates employment.
(i)
You are not required to make records under this section of site-specific hazard awareness training you provide under § 46.11 of this part to persons who are not miners under § 46.2. However, you must be able to provide evidence to us, upon request, that the training was provided, such as the training materials that are used; copies of written information distributed to persons upon their arrival at the mine; or visitor log books that indicate that training has been provided.
Notes, amendments, and revision history

Authority

Authority: 30 U.S.C. 811, 825.

Source

Source: 64 FR 53130, Sept. 30, 1999, unless otherwise noted.

§46.10. Compensation for training.

30 C.F.R. § 46.10

(a)
Training must be conducted during normal working hours. Persons required to receive training must be paid at a rate of pay that corresponds to the rate of pay they would have received had they been performing their normal work tasks.
(b)
If training is given at a location other than the normal place of work, persons required to receive such training must be compensated for the additional costs, including mileage, meals, and lodging, they may incur in attending such training sessions.
Notes, amendments, and revision history

Authority

Authority: 30 U.S.C. 811, 825.

Source

Source: 64 FR 53130, Sept. 30, 1999, unless otherwise noted.