§250.528. What must I include in my casing pressure request?
30 C.F.R. § 250.528
The following information must be included in the casing pressure request:
API number;
Lease number;
Area name and OCS block number;
Well number;
Company name and mailing address;
All casing, riser, and tubing sizes, weights, grades, and MIYP;
All casing/riser calculated MAWOPs;
All casing/riser pre-bleed down pressures;
Shut-in tubing pressure;
Flowing tubing pressure;
Date and the calculated daily production rate during last well test (oil, gas, basic sediment, and water);
Well status (shut-in, temporarily abandoned, producing, injecting, or gas lift);
Well type (dry tree, hybrid, or subsea);
Date of diagnostic test;
Well schematic;
Water depth;
Volumes and types of fluid bled from each casing or riser evaluated;
Type of diagnostic test performed—
Bleed down/buildup test;
Shut-in the well and monitor the pressure drop test;
Constant production rate and decrease the annular pressure test;
Constant production rate and increase the annular pressure test;
Change the production rate and monitor the casing pressure test; and
Casing pressure and tubing pressure history plot;
The casing diagnostic test data for all casing exceeding 100 psig;
Associated shoe strengths for casing shoes exposed to annular fluids;
Concentration of any H2S that may be present;
Whether the structure on which the well is located is manned or unmanned;
Additional comments; and
Request date.
Notes, amendments, and revision history
Amendments
[76 FR 64462, Oct. 18, 2011. Redesignated at 77 FR 50894, Aug. 22, 2012]
Authority
Authority: 30 U.S.C. 1751, 31 U.S.C. 9701, 33 U.S.C. 1321(j)(1)(C), 43 U.S.C. 1334.
Source
Source: 76 FR 64462, Oct. 18, 2011, unless otherwise noted.
Amendments
[76 FR 64462, Oct. 18, 2011. Redesignated at 77 FR 50894, Aug. 22, 2012]