§250.198. Documents incorporated by reference.
30 C.F.R. § 250.198
Certain material is incorporated by reference into this part with the approval of the Director of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. All approved incorporation by reference (IBR) material is available for inspection at BSEE and at the National Archives and Records Administration (NARA). Contact BSEE at: the Houston BSEE office at 1919 Smith Street Suite 14042, Houston, Texas 77002; 1-844-259-4779; or at [email protected]. For information on the availability of this material at NARA, visit www.archives.gov/federal-register/cfr/ibr-locations or email: [email protected]. The material may be obtained from the following sources:
American Concrete Institute (ACI), ACI Standards, 38800 Country Club Drive, Farmington Hills, MI 48331-3439: phone: 248-848-3700; website: www.concrete.org:
ACI Standard 318-95, Building Code Requirements for Reinforced Concrete, 1995; into § 250.901.
ACI 318R-95, Commentary on Building Code Requirements for Reinforced Concrete, 1995; into § 250.901.
ACI 357R-84, Guide for the Design and Construction of Fixed Offshore Concrete Structures, 1984; reapproved 1997, into § 250.901.
American Gas Association (AGA Reports), 400 North Capitol Street NW, Suite 450, Washington, DC 20001; phone: 202-824-7000; website: www.aga.org.
AGA Report No. 7, Measurement of Natural Gas by Turbine Meters, Revised February 2006; into § 250.1203(b).
AGA Report No. 8, Part 1, Thermodynamic Properties of Natural Gas and Related Gases Detail and Gross Equations of State, Third Edition, April 2017; into § 250.1203(b).
AGA Report No. 8, Part 2, Thermodynamic Properties of Natural Gas and Related Gases, GERG-2008 Equation of State, First Edition, April 2017; into § 250.1203(b).
AGA Report No. 9, Measurement of Gas by Multipath Ultrasonic Meters; Fourth Edition, 2022; into § 250.1203(b).
AGA Report No. 10, Speed of Sound in Natural Gas and Other Related Hydrocarbon Gases, Copyright 2003; into § 250.1203(b).
AGA Report No. 11, Measurement of Natural Gas by Coriolis Meter, Second Edition, February 2013; into § 250.1203(b).
American Institute of Steel Construction, Inc.
, AISC Standards, One East Wacker Drive, Suite 700, Chicago, IL 60601-1802; phone: 312-670-2400; website: www.aisc.org.
ANSI/AISC 360-05, Specification for Structural Steel Buildings; into § 250.901.
[Reserved]
American National Standards Institute (ANSI), 25 West 43rd Street, Fourth Floor, New York, NY 10036-7417; phone: 212-642-4980; email: [email protected]; website: www./webstore.ansi.org/:
ANSI/ASME B16.5-2003, Pipe Flanges and Flanged Fittings; into § 250.1002.
ANSI/ASME B31.8-2003, Gas Transmission and Distribution Piping Systems; into § 250.1002.
ANSI Z88.2-1992, American National Standard for Respiratory Protection; into § 250.490.
American Petroleum Institute (API), 200 Massachusetts Avenue NW, Suite 1100, Washington, DC 20001-5571; phone: 202-682-8000; website: www.api.org.
Manual of Petroleum Measurement Standards (MPMS)—
Chapter 1.
API MPMS Chapter 1, Vocabulary, Second Edition, July 1994; into § 250.1201.
[Reserved]
Chapter 2.
API MPMS Chapter 2— Tank Calibration, Section 2A—Measurement and Calibration of Upright Cylindrical Tanks by the Manual Tank Strapping Method, First Edition February 1995, reaffirmed August 2017; into § 250.1202(a) and (l).
API MPMS Chapter 2— Tank Calibration, Section 2B—Calibration of Upright Cylindrical Tanks Using the Optical Reference Line Method, First Edition, March 1989, reaffirmed April 2019 (including Addendum 1, October 2019); into § 250.1202(a) and (l).
Chapter 3.
API MPMS Chapter 3.1A, Standard Practice for the Manual Gauging of Petroleum and Petroleum Products, Third Edition, August 2013, Errata 1, January 2021; into § 250.1202(a) and (l).
API MPMS Chapter 3— Tank Gauging, Section 1B—Standard Practice for Level Measurement of Liquid Hydrocarbons in Stationary Tanks by Automatic Tank Gauging, Second Edition, June 2001, reaffirmed February 2016; into § 250.1202(a) and (l).
Chapter 4.
API MPMS Chapter 4— Proving Systems, Section 1—Introduction, Third Edition, February 2005, reaffirmed June 2014; into § 250.1202(a).
API MPMS Chapter 4— Proving Systems, Section 2—Displacement Provers, Third Edition, September 2003; Addendum February 2015, Reaffirmed December 2022; into § 250.1202(a).
API MPMS Chapter 4— Proving Systems, Section 4—Tank Provers, Second Edition May 1998, reaffirmed May 2015; into § 250.1202(a) and (f).
API MPMS Chapter 4.5, Master Meter Provers, Fourth Edition, June 2016; into § 250.1202(a).
API MPMS Chapter 4— Proving Systems, Section 6—Pulse Interpolation, Second Edition, May 1999; Errata April 2007; reaffirmed October 2013; into § 250.1202(a) and (h).
API MPMS Chapter 4— Proving Systems, Section 7—Field Standard Test Measures, Third Edition, April 2009, reaffirmed June 2014; into § 250.1202(a).
API MPMS Chapter 4.8, Operation of Proving Systems, Third Edition, July 2021; into § 250.1202(a), (f), and (g).
API MPMS Chapter 4— Proving Systems, Section 9—Methods of Calibration for Displacement and Volumetric Tank Provers, Part 2—Determination of the Volume of Displacement and Tank Provers by the Water-draw Method of Calibration, First Edition, December 2005, reaffirmed July 2015; into § 250.1202(a).
Chapter 5.
API MPMS Chapter 5— Metering, Section 1—General Considerations for Measurement by Meters, Fourth Edition, September 2005, Errata 1 June 2008, Errata 2 June 2011, reaffirmed December 2022; into § 250.1202(a).
API MPMS Chapter 5— Metering, Section 2—Measurement of Liquid Hydrocarbons by Displacement Meters, Third Edition, September 2005, reaffirmed July 2015; into § 250.1202(a).
API MPMS Chapter 5— Metering, Section 3—Measurement of Liquid Hydrocarbons by Turbine Meters, Fifth Edition, September 2005, reaffirmed August 2014; into § 250.1202(a).
API MPMS Chapter 5— Metering, Section 4—Accessory Equipment for Liquid Meters, Fourth Edition, September 2005, Errata May 2015, reaffirmed August 2015; into § 250.1202(a).
API MPMS Chapter 5— Metering, Section 5—Fidelity and Security of Flow Measurement Pulsed-Data Transmission Systems, Second Edition, August 2005, reaffirmed August 2015; into § 250.1202(a).
API MPMS Chapter 5— Metering, Section 6—Measurement of Liquid Hydrocarbons by Coriolis Meters; First Edition, October 2002, reaffirmed November 2013; into § 250.1202(a).
API MPMS Chapter 5.8, Measurement of Liquid Hydrocarbons by Ultrasonic Flow Meters, Second Edition, November 2011, Errata February 2014, reaffirmed May 2017; into § 250.1202(a).
Chapter 6.
API MPMS Chapter 6.1, Lease Automatic Custody Transfer (LACT) Systems, Second Edition, May 1991; Addendum 1 August 2020; into § 250.1202(a).
API MPMS Chapter 6— Metering Assemblies, Section 6—Pipeline Metering Systems, Second Edition, May 1991, reaffirmed December 2017; into § 250.1202(a).
API MPMS Chapter 6— Metering Assemblies, Section 7—Metering Viscous Hydrocarbons, Second Edition, May 1991, reaffirmed March 2018; into § 250.1202(a).
Chapter 7.
API MPMS Chapter 7.1, Temperature Determination-Liquid-in-Glass Thermometers, Second Edition, August 2017; into § 250.1202(a).
API MPMS Chapter 7.3, Temperature Determination—Temperature Determination—Fixed Automatic Tank Temperature Systems, Second Edition, October 2011; reaffirmed September 2021 into § 250.1202(a).
Chapter 8.
API MPMS Chapter 8.1, Standard Practice for Manual Sampling of Petroleum and Petroleum Products, Sixth Edition, September 2022; into § 250.1202(a) and (k).
API MPMS Chapter 8.2, Standard Practice for Automatic Sampling of Liquid Petroleum and Petroleum Products, Sixth Edition, September 2022; into § 250.1202(a), (b), and (k).
API MPMS Chapter 8.3, Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products, Second Edition, September 2019; into § 250.1202(a).
Chapter 9.
API MPMS Chapter 9.1, Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method, Third Edition, December 2012, reaffirmed May 2017; into § 250.1202(a).
API MPMS Chapter 9.2, Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer, Fourth Edition, November 2022; into § 250.1202(a).
API MPMS Chapter 9.4, Continuous Density Measurement Under Dynamic (Flowing) Conditions, First Edition, January 2018; into § 250.1202(a).
Chapter 10.
API MPMS Chapter 10— Sediment and Water, Section 1—Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method, Third Edition, November 2007; reaffirmed October 2012; into § 250.1202(a);
API MPMS Chapter 10.2, Standard Test Method for Water in Crude Oil by Distillation, Fifth Edition, December 2022; into § 250.1202(a).
API MPMS Chapter 10.3, Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure), Fifth Edition, December 2022; into § 250.1202(a).
API MPMS Chapter 10.4, Determination of Water and/or Sediment in Crude Oil by the Centrifuge Method (Field Procedure), Fifth Edition, August 2020; into § 250.1202(a).
API MPMS Chapter 10.9, Standard Test Method for Water in Crude Oils by Coulometric Karl Fisher Titration, Third Edition, May 2013, reaffirmed June 2018; into § 250.1202(a).
Chapter 11.
API MPMS Chapter 11.1—Volume Correction Factors, Volume 1, Table 5A—Generalized Crude Oils and JP-4 Correction of Observed API Gravity to API Gravity at 60 °F, and Table 6A—Generalized Crude Oils and JP-4 Correction of Volume to 60 °F Against API Gravity at 60 °F, API Standard 2540, First Edition, August 1980; reaffirmed March 1997; into § 250.1202(a).
API MPMS Chapter 11— Physical Properties Data, Section 1—Temperature and Pressure Volume Correction Factors for Generalized Crude Oils, Refined Products, and Lubricating Oils, May 2004, Addendum 1 September 2007, Addendum 2 May 2019; into § 250.1202(a), (g), and (l).
API MPMS Chapter 11.2.2—Compressibility Factors for Hydrocarbons: 0.350-0.637 Relative Density (60 °F/60 °F) and −50 °F to 140 °F Metering Temperature, Second Edition, October 1986; reaffirmed: December 2007; into § 250.1202(a).
API MPMS Chapter 11— Physical Properties Data, Addendum to Section 2, Part 2—Compressibility Factors for Hydrocarbons, Correlation of Vapor Pressure for Commercial Natural Gas Liquids, First Edition, December 1994; reaffirmed December 2002; into § 250.1202(a).
Chapter 12.
API MPMS Chapter 12— Calculation of Petroleum Quantities, Section 2—Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors, Part 1—Introduction, Second Edition, May 1995; reaffirmed March 2014; into § 250.1202(a).
API MPMS Chapter 12— Calculation of Petroleum Quantities, Section 2—Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors, Part 2—Measurement Tickets, Third Edition, June 2003; reaffirmed February 2016; into § 250.1202(a).
API MPMS Chapter 12— Calculation of Petroleum Quantities, Section 2—Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors, Part 3—Proving Report; First Edition, October 1998, reaffirmed March 2014; into § 250.1202(a) and (g).
API MPMS Chapter 12— Calculation of Petroleum Quantities, Section 2—Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors, Part 4—Calculation of Base Prover Volumes by the Waterdraw Method, First Edition, December 1997; reaffirmed September 2014; into § 250.1202(a), (f), and (g).
API MPMS Chapter 12.2, Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors, Second Edition, July 2021; into § 250.1202(a).
Chapter 14.
API MPMS Chapter 14.1, Collecting and Handling of Natural Gas Samples for Analysis by Gas Chromatography, Eighth Edition, September 2022; into § 250.1203(b).
API MPMS Chapter 14.3.1—Orifice Metering of Natural Gas and Other Related Hydrocarbon Fluids—Concentric, Square-edged Orifice Meters, Part 1: General Equations and Uncertainty Guidelines, Fourth Edition September 2012, Errata July 2013, Reaffirmed September 2017; into § 250.1203(b).
API MPMS Chapter 14.3.2, Orifice Metering of Natural Gas and Other Related Hydrocarbon Fluids—Concentric, Square-edged Orifice Meters, Part 2: Specification and Installation Requirements, Fifth Edition, March 2016, Errata 1 March 2017, Errata 2 January 2019; into § 250.1203(b).
API MPMS 14.3.3, Orifice Metering of Natural Gas and Other Related Hydrocarbon Fluids—Concentric, Square-edged Orifice Meters, Part 3: Natural Gas Applications, Fourth Edition November 2013, Reaffirmed June 2021; into § 250.1203(b).
API MPMS, Chapter 14.5/GPA Standard 2172-09; Calculation of Gross Heating Value, Relative Density, Compressibility and Theoretical Hydrocarbon Liquid Content for Natural Gas Mixtures for Custody Transfer; Third Edition, January 2009; reaffirmed February 2014; into § 250.1203(b).
API MPMS Chapter 14— Natural Gas Fluids Measurement, Section 8—Liquefied Petroleum Gas Measurement, Second Edition, July 1997; reaffirmed, March 2006; into § 250.1203(b).
Chapter 20.
API MPMS Chapter 20— Allocation Measurement, Section 1—Allocation Measurement, First Edition, September 1993, Addendum 1 January 2013, Addendum 2 November 2016, Addendum 3 December 2017, Reaffirmed June 2024; into §§ 250.1202(a); 250.1203(b).
API MPMS Chapter 20.3, Measurement of Multiphase Flow, First Edition, January 2013; reaffirmed, October 2018; into § 250.1203(b).
API MPMS Chapter 20.5, Recommended Practice for Application of Production Well Testing in Measurement and Allocation, First Edition, December 2017; Errata 1, August 2023; into § 250.1204(b).
Chapter 21.
API MPMS Chapter 21— Flow Measurement Using Electronic Metering Systems, Section 1—Electronic Gas Measurement, First Edition, August 1993; reaffirmed, July 2005; into § 250.1203(b).
API MPMS Chapter 21— Flow Measurement Using Electronic Metering Systems, Section 2—Electronic Liquid Volume Measurement Using Positive Displacement and Turbine Meters; First Edition, June 1998; reaffirmed October 2016; into § 250.1202(a).
API MPMS Chapter 21— Flow Measurement Using Electronic Metering Systems, Addendum to Section 2—Flow Measurement Using Electronic Metering Systems, Inferred Mass; First Edition, reaffirmed February 2006; into § 250.1202(a).
Recommended Practices, Specifications, and Standards—
1-99.
API Recommended Practice 2A-WSD, Planning, Designing and Constructing Fixed Offshore Platforms— Working Stress Design, Twenty-second Edition, November 2014, reaffirmed September 2020; into §§ 250.901(a) and (d); 250.908(a); 250.920(f).
API Specification 2C, Specification for Offshore Pedestal Mounted Cranes, Sixth Edition, March 2004; into § 250.108.
API Recommended Practice 2D, Operation and Maintenance of Offshore Cranes, Sixth Edition, May 2007; into § 250.108.
API Recommended Practice 2FPS, Planning, Designing, and Constructing Floating Production Systems, Second Edition, October 2011, Reaffirmed September 2020; into § 250.901(a) and (d).
API Recommended Practice 2FSIM, Floating Systems Integrity Management, First Edition, September 2019; into § 250.901(a) and (d).
ANSI/API Recommended Practice 2GEO, Geotechnical and Foundation Design Considerations, First Edition April 2011, Addendum 1 October 2014, Reaffirmed January 2021; into § 250.901(a) and (d).
API Recommended Practice 2I, In-Service Inspection of Mooring Hardware for Floating Structures; Third Edition, April 2008; into § 250.901(a) and (d).
ANSI/API Recommended Practice 2MET, Derivation of Metocean Design and Operating Conditions; Second Edition, January 2021; into § 250.901(a) and (d).
API Recommended Practice 2MIM, Mooring Integrity Management; First Edition, September 2019; into § 250.901(a) and (d).
ANSI/API Recommended Practice 2N, Planning, Designing, and Constructing Structures and Pipelines for Arctic Conditions, Third Edition, April 2015; into § 250.470(g).
API Recommended Practice 2RD, Design of Risers for Floating Production Systems (FPSs) and Tension-Leg Platforms (TLPs), First Edition, June 1998; reaffirmed, May 2006; Errata, June 2009; into §§ 250.733; 250.800(c); 250.901(a) and (d); 250.1002(b).
API Recommended Practice 2RIM, Integrity Management of Risers from Floating Production Systems; First Edition, September 2019; into § 250.901(a) and (d).
API Recommended Practice 2SIM, Structural Integrity Management of Fixed Offshore Structures, First Edition November 2014; reaffirmed September 2020; into §§ 250.901(a) and (d); 250.919(b) and (d); 250.920.
API Recommended Practice 2SK, Design and Analysis of Stationkeeping Systems for Floating Structures, Third Edition October 2005, Addendum May 2008, reaffirmed June 2015; into §§ 250.800(c); 250.901(a) and (d).
API Recommended Practice 2SM, Design, Manufacture, Installation, and Maintenance of Synthetic Fiber Ropes for Offshore Mooring, Second Edition, July 2014; Reaffirmation, September 2020; into §§ 250.800(c); 250.901(a) and (d).
API Recommended Practice 2T, Planning, Designing, and Constructing Tension Leg Platforms, Third Edition, July 2010, reaffirmed June 2015; into § 250.901(a) and (d).
API Specification 6A, Specification for Wellhead and Christmas Tree Equipment, Twenty-First Edition November 2018, Errata 1 April 2019, Errata 2 June 2020, Errata 3 September 2020, Errata 4 September 2021, Addendum 1, July 2020, Addendum 2, June 2021, Addendum 3, August 2022; into §§ 250.518(c); 250.619(c); 250.730(a); 250.802(a); 250.803(a); 250.833; 250.873(b); 250.874(g); 250.1002(b).
API Standard 6AV1, Validation of Safety and Shutdown Valves for Sandy Service, Third Edition, July 2018; into §§ 250.802(a) and (c); 250.833; 250.873(b); 250.874(g).
API Standard 6AV2, Installation, Maintenance, and Repair of Surface Safety Valves and Underwater Safety Valves Offshore; First Edition March 2014; Errata 1 August 2014; into §§ 250.820; 250.834; 250.836; 250.880(c).
API Specification 6D, Specification for Valves, Twenty-fifth Edition November 2021, Errata 1 December 2021, Errata 2 April 2022, Addendum 1 April 2023; into § 250.1002(b).
ANSI/API Specification 11D1, Packers and Bridge Plugs, Third Edition, April 2015; Errata 1, August 2019; into §§ 250.518(e); 250.619(e); 250.1703.
ANSI/API Specification 14A, Specification for Subsurface Safety Valve Equipment, Eleventh Edition, October 2005, reaffirmed June 2012; into §§ 250.802; 250.803(a).
ANSI/API Recommended Practice 14B, Design, Installation, Operation, Test, and Redress of Subsurface Safety Valve Systems, Sixth Edition, September 2015; into §§ 250.802(b); 250.803(a); 250.814(d); 250.828(c); 250.880(c).
API Recommended Practice 14C, Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms, Seventh Edition, March 2001, reaffirmed: March 2007; into §§ 250.125(a); 250.841(a); 250.842(a); 250.850; 250.852(a); 250.855, 250.856(a); 250.858(a); 250.862(e); 250.865(a); 250.867(a); 250.869(a) through (c); 250.872(a); 250.873(a); 250.874(a); 250.880(b) and (c); 250.1002(d); 250.1004(b).
API Recommended Practice 14E, Design and Installation of Offshore Production Platform Piping Systems, Fifth Edition, October 1991; reaffirmed, January 2013; into §§ 250.841(b); 250.842(a).
API Recommended Practice 14F, Design, Installation, and Maintenance of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class 1, Division 1 and Division 2 Locations, Upstream Segment, Fifth Edition, July 2008, reaffirmed: April 2013; into §§ 250.114(c); 250.842(c); 250.862(e).
API Recommended Practice 14FZ, Design, Installation, and Maintenance of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class I, Zone 0, Zone 1 and Zone 2 Locations, Second Edition, May 2013; into §§ 250.114(c); 250.842(c); 250.862(e).
API Recommended Practice 14G, Fire Prevention and Control on Fixed Open-type Offshore Production Platforms, Fourth Edition, April 2007; Reaffirmed, January 2013; into §§ 250.859(a); 250.862(e); 250.880(c).
API Recommended Practice 14J, Design and Hazards Analysis for Offshore Production Facilities, Second Edition, May 2001; reaffirmed: January 2013; into §§ 250.800(b) and (c); 250.842(c); 250.901(a) and (d).
ANSI/API Specification 16A, Specification for Drill-through Equipment, Third Edition June 2004, reaffirmed August 2010; into § 250.730.
ANSI/API Specification 16C, Specification for Choke and Kill Systems, First Edition, January 1993, reaffirmed July 2010; into § 250.730.
API Specification 16D, Specification for Control Systems for Drilling Well Control Equipment and Control Systems for Diverter Equipment, Second Edition, July 2004, reaffirmed August 2013; into § 250.730.
API Specification 17D, Specification for Subsea Wellhead and Tree Equipment, Third Edition, October 2021, Errata 1, December 2021, Addendum 1, December 2022; into §§ 250.518(c); 250.619(c); 250.730(a).
API Recommended Practice 17H, Remotely Operated Tools and Interfaces on Subsea Production Systems, Second Edition, June 2013; Errata, January 2014; into § 250.734(a).
API Specification 17J, Specification for Unbonded Flexible Pipe, Fourth Edition, May 2014, Errata 1 September 2016, Errata 2 May 2017, Addendum 1 October 2017, reaffirmed March 2021; into §§ 250.852(e); 250.1002(b); 250.1007(a).
API Specification 20E, Alloy and Carbon Steel Bolting for Use in the Petroleum and Natural Gas Industries, Second Edition, February 2017, Addendum 1 September 2018, Addendum 2 March 2019, Errata 1 November 2021, Errata 2 May 2022; into § 250.730(a).
API Specification 20F, Corrosion-resistant Bolting for Use in the Petroleum and Natural Gas Industries; Second Edition, May 2018, Errata 1 October 2020, Addendum 1 November 2021; into § 250.730(a).
API Standard 53, Well Control Equipment Systems for Drilling Wells, Fifth Edition, December 2018; into §§ 250.730(a); 250.734(a); 250.735(a); 250.736(d); 250.737(d); 250.739(a).
API Recommended Practice 65, Recommended Practice for Cementing Shallow Water Flow Zones in Deepwater Wells, First Edition, September 2002; into § 250.415.
API Standard 65— Part 2, Isolating Potential Flow Zones During Well Construction; Second Edition, December 2010; into §§ 250.415(f); 250.420(a).
API Recommended Practice 75, Recommended Practice for Development of a Safety and Environmental Management Program for Offshore Operations and Facilities, Third Edition, May 2004, reaffirmed May 2008; into §§ 250.1900; 250.1902; 250.1903; 250.1909; 250.1920.
API Recommended Practice 90, Annular Casing Pressure Management for Offshore Wells, First Edition, August 2006; into § 250.519.
500-599.
API Recommended Practice 500, Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Division 1 and Division 2, Third Edition, December 2012; Errata January 2014, into §§ 250.114(a); 250.459; 250.842(a); 250.862(a) and (e); 250.872(a).
API Recommended Practice 505, Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Zone 0, Zone 1, and Zone 2, First Edition, November 1997; reaffirmed, August 2013; into §§ 250.114(a); 250.459; 250.842(a); 250.862(a) and (e); 250.872(a).
API 510, Pressure Vessel Inspection Code— In-Service Inspection, Rating, Repair, and Alteration, Tenth Edition, May 2014, Addendum 1, May 2017; into § 250.851(a).
API 570, Piping Inspection Code— In-service Inspection, Rating, Repair, and Alteration of Piping Systems, Fourth Edition, February 2016, Addendum 1, May 2017; into § 250.841(b).
2500-2599.
API Standard 2555, Method for Liquid Calibration of Tanks, First Edition, September 1966, reaffirmed May 2014; into § 250.1202(a).
API Recommended Practice 2556, Recommended Practice for Correcting Gauge Tables for Incrustation, Second Edition, August 1993, reaffirmed November 2013; into § 250.1202(a).
A-Q.
ANSI/API Specification Q1, Specification for Quality Management System Requirements for Manufacturing Organizations for the Petroleum and Natural Gas Industry, Ninth Edition, June 2013; Errata, February 2014; Errata 2, March 2014; Addendum 1, June 2016; into §§ 250.730; 250.801(b) and (c);
[Reserved]
Bulletins.
API Bulletin 92L, Drilling Ahead Safely with Lost Circulation in the Gulf of Mexico, First Edition, August 2015; into § 250.427(b).
[Reserved]
American Society of Mechanical Engineers (ASME), 22 Law Drive, P.O. Box 2900, Fairfield, NJ 07007-2900; phone: 1-800-843-2763; website: www.asme.org:
2017 ASME Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers, 2017 Edition, July 1, 2017; into § 250.851(a).
2017 ASME Boiler and Pressure Vessel Code, Section IV, Rules for Construction of Heating Boilers, 2017 Edition, July 1, 2017; into § 250.851(a).
ASME Boiler and Pressure Vessel Code (BPVC), Section VIII, Rules for Construction of Pressure Vessels; into § 250.851(a)—as follows:
ASME BPVC.VIII.1-2021, Division 1, 2021 Edition, July 1, 2021.
2017 ASME BPVC, Division 2: Alternative Rules, 2017 Edition, July 1, 2017.
2017 ASME BPVC, Division 3: Alternative Rules for Construction of High Pressure Vessels, 2017 Edition, July 1, 2017.
ASTM, International (ASTM), 100 Bar Harbor Drive, P.O. Box C700, West Conshohocken, PA 19428-2959; phone: 1-877-909-2786; website: www.astm.org:
ASTM C33-07, approved December 15, 2007, Standard Specification for Concrete Aggregates; into § 250.901.
ASTM C94/C 94M-07, approved January 1, 2007, Standard Specification for Ready-Mixed Concrete; into § 250.901.
ASTM C150-07, approved May 1, 2007, Standard Specification for Portland Cement; into § 250.901.
ASTM C330-05, approved December 15, 2005, Standard Specification for Lightweight Aggregates for Structural Concrete; into § 250.901.
ASTM C595-08, approved January 1, 2008, Standard Specification for Blended Hydraulic Cements; into § 250.901.
American Welding Society (AWS), AWS Codes, 8669 NW 36 Street, #130, Miami, FL 33126; phone— 800-443-9353; website: www.aws.org:
AWS D1.1:2000, Structural Welding Code—Steel, 17th Edition, October 18, 1999; into § 250.901.
AWS D1.4-98, Structural Welding Code—Reinforcing Steel, 1998 Edition; into § 250.901.
AWS D3.6M:1999, Specification for Underwater Welding (1999); into § 250.901.
Center for Offshore Safety (COS), 1990 Post Oak Blvd., Suite 1370, Houston, TX 77056; phone: 832-495-4925; website: www.centerforoffshoresafety.org:
COS Safety Publication COS-2-01, Qualification and Competence Requirements for Audit Teams and Auditors Performing Third-party SEMS Audits of Deepwater Operations, First
Edition, Effective Date October 2012; into §§ 250.1900; 250.1903; 250.1904; 250.1921.
COS Safety Publication COS-2-03, Requirements for Third-party SEMS Auditing and Certification of Deepwater Operations, First Edition, Effective Date October 2012; into §§ 250.1900; 250.1903; 250.1904; 250.1920.
COS Safety Publication COS-2-04, Requirements for Accreditation of Audit Service Providers Performing SEMS Audits and Certification of Deepwater Operations, First Edition, Effective Date October 2012; into §§ 250.1900; 250.1903; 250.1904; 250.1922.
GPA Midstream Association, 6060 S American Plaza St E, Suite 700, Tulsa, Oklahoma 74135; phone—
493-3872. fax: (918) 493-3875; email: [email protected]:
GPA Midstream Standard 2198-16 (GPA Standard 2198-16), Selection, Preparation, Validation, Care and Storage of Natural Gas and Natural Gas Liquids Reference Standard Blends, Revised August 2016; into § 250.1203(b).
GPA Midstream Standard 2261-20 (GPA Standard 2261-20), Analysis for Natural Gas and Similar Gaseous Mixtures by Gas Chromatography, Copyright 2019; into § 250.1203(b).
GPA Standard 2286-14, Method for the Extended Analysis of Natural Gas and Similar Gaseous Mixtures by Temperature Program Gas Chromatography, Revised 2014; into § 250.1203(b).
International Organization for Standardization (ISO), 1, ch. de la Voie-Creuse, CP 56, CH-1211, Geneva 20, Switzerland; phone: 41-22-749-01-11; website: www.iso.org:
ISO/IEC 17011— 2017(E), Conformity assessment—Requirements for accreditation bodies accrediting conformity assessment bodies, Second Edition 2017-11 (ISO/IEC 17011); into §§ 250.1900(a); 250.1903; 250.1904(d); 250.1922.
ISO/IEC 17021-1, Conformity assessment— Requirements for bodies providing audit and certification of management systems—Part 1: Requirements, First Edition, June 2015; into § 250.730(d).
National Association of Corrosion Engineers (NACE) International, NACE Standards, Park Ten Place, Houston, TX 77084; phone: 281-228-6200; website: www.nace.org:
NACE Standard MR0175-2003, Standard Material Requirements, Metals for Sulfide Stress Cracking and Stress Corrosion Cracking Resistance in Sour Oilfield Environments, Revised January 17, 2003; into §§ 250.490; 250.518(a); 250.619(a); 250.901.
NACE Standard RP0176-2003, Standard Recommended Practice, Corrosion Control of Steel Fixed Offshore Structures Associated with Petroleum Production; into § 250.901.
Notes, amendments, and revision history
Amendments
[84 FR 21969, May 15, 2019, as amended at 85 FR 84236, Dec. 30, 2020; 89 FR 71111, Aug. 30, 2024; 91 FR 35347, June 10, 2026]
Authority
Authority: 30 U.S.C. 1751, 31 U.S.C. 9701, 33 U.S.C. 1321(j)(1)(C), 43 U.S.C. 1334.
Source
Source: 76 FR 64462, Oct. 18, 2011, unless otherwise noted.
Amendments
[84 FR 21969, May 15, 2019, as amended at 85 FR 84236, Dec. 30, 2020; 89 FR 71111, Aug. 30, 2024; 91 FR 35347, June 10, 2026]