§7.1. Definitions. — Inbound Citations

(a) Any malt beverage, as defined in § 7.1, may be designated simply as a “malt beverage.”

(b) The following provisions apply to labels on kegs with a capacity of 5.16 gallons or more that bear mandatory information, as defined by § 7.61(a)(5), and are in the form of a keg collar or tap cover, as defined in § 7.1.

(1) Such keg collars or tap covers are considered to be firmly affixed if removal would break or destroy the keg collar or tap cover in such a way that it cannot be reused.

(2) Such keg collars or tap covers are not required to be firmly affixed, provided that the name of the bottler or importer of the malt beverage, as applicable under §§ 7.66-7.68, is permanently or semi-permanently stated on the keg in the form of embossing, engraving, stamping, or through the use of a sticker or ink jet method.

(b) The regulations in this part do not cover beer products that are not made with both malted barley and hops, or their parts or their products, or that do not fall within the definition of a “malt beverage” under § 7.1 for any other reason. Bottlers and importers of alcohol beverages that do not fall within the definition of malt beverages, wine, or distilled spirits under the FAA Act should refer to the applicable labeling regulations for foods issued by the U.S. Food and Drug Administration. See 21 CFR part 101.

(a) This section applies to malt beverages that are imported in a container, as defined in § 7.1. See § 7.67 for rules regarding name and address requirements applicable to malt beverages that are domestically bottled after importation. See 19 CFR parts 102 and 134 for U.S. Customs and Border Protection country of origin marking requirements.