§1307.13. Incidental manufacture of controlled substances. — Inbound Citations

(a) Every registrant, including collectors, shall maintain the records and inventories and shall file the reports required by this part, except as exempted by this section. Any registrant that is authorized to conduct other activities without being registered to conduct those activities, pursuant to §§ 1301.22(b), 1307.11, 1307.13, or part 1317 of this chapter, shall maintain the records and inventories and shall file the reports required by this part for persons registered or authorized to conduct such activities. This latter requirement should not be construed as requiring stocks of controlled substances being used in various activities under one registration to be stored separately, nor that separate records are required for each activity. The intent of the Administration is to permit the registrant to keep one set of records which are adapted by the registrant to account for controlled substances used in any activity. Also, the Administration does not wish to require separate stocks of the same substance to be purchased and stored for separate activities. Otherwise, there is no advantage gained by permitting several activities under one registration. Thus, when a researcher manufactures a controlled item, he must keep a record of the quantity manufactured; when he distributes a quantity of the item, he must use and keep invoices or order forms to document the transfer; when he imports a substance, he keeps as part of his records the documentation required of an importer; and when substances are used in chemical analysis, he need not keep a record of this because such a record would not be required of him under a registration to do chemical analysis. All of these records may be maintained in one consolidated record system. Similarly, the researcher may store all of his controlled items in one place, and every two years take inventory of all items on hand, regardless of whether the substances were manufactured by him, imported by him, or purchased domestically by him, of whether the substances will be administered to subjects, distributed to other researchers, or destroyed during chemical analysis.

(e) Each person registered or authorized (by §§ 1301.13, 1307.11, 1307.13, or part 1317 of this chapter) to manufacture, distribute, reverse distribute, dispense, import, export, conduct research or chemical analysis with controlled substances, or collect controlled substances from ultimate users, and required to keep records pursuant to § 1304.03 shall include in the inventory the information listed below.

(1) Each person registered or authorized to manufacture controlled substances shall include the following information in the inventory:

(i) For each controlled substance in bulk form to be used in (or capable of use in) the manufacture of the same or other controlled or non-controlled substances in finished form, the inventory shall include:

(A) The name of the substance and

(ii) For each controlled substance in the process of manufacture on the inventory date, the inventory shall include:

(A) The name of the substance;

(B) The quantity of the substance in each batch and/or stage of manufacture, identified by the batch number or other appropriate identifying number; and

(C) The physical form which the substance is to take upon completion of the manufacturing process (e.g., granulations, tablets, capsules, or solutions), identified by the batch number or other appropriate identifying number, and if possible the finished form of the substance (e.g., 10-milligram tablet or 10-milligram concentration per fluid ounce or milliliter) and the number or volume thereof.

(iii) For each controlled substance in finished form the inventory shall include:

(A) The name of the substance;

(B) Each finished form of the substance (e.g., 10-milligram tablet or 10-milligram concentration per fluid ounce or milliliter);

(C) The number of units or volume of each finished form in each commercial container (e.g., 100-tablet bottle or 3-milliliter vial); and

(D) The number of commercial containers of each such finished form (e.g. four 100-tablet bottles or six 3-milliliter vials).

(iv) For each controlled substance not included in paragraphs (e)(1) (i), (ii) or (iii) of this section (e.g., damaged, defective or impure substances awaiting disposal, substances held for quality control purposes, or substances maintained for extemporaneous compoundings) the inventories shall include:

(A) The name of the substance;

(B) The total quantity of the substance to the nearest metric unit weight or the total number of units of finished form; and

(C) The reason for the substance being maintained by the registrant and whether such substance is capable of use in the manufacture of any controlled substance in finished form.

(2) Each person registered or authorized to distribute controlled substances shall include in the inventory the same information required of manufacturers pursuant to paragraphs (e)(1)(iii) and (iv) of this section.

(3) Each person registered or authorized to reverse distribute controlled substances shall include in the inventory, the following information:

(i) The name of the substance, and

(A) For controlled substances in bulk form, to the nearest metric unit weight consistent with unit size;

(B) Each finished form of the substance (e.g., 10-milligram tablet or 10-milligram concentration per fluid ounce or milliliter); the number of units or volume of each finished form in each commercial container (e.g., 100-tablet bottle or 3-milliliter vial); and the number of commercial containers of each such finished form (e.g., four 100-tablet bottles or six 3-milliliter vials); and

(C) For controlled substances in a commercial container, carton, crate, drum, or other receptacle that has been opened: If the substance is listed in Schedule I or II, make an exact count or measure of the contents; or if the substance is listed in Schedule III, IV, or V, make an estimated count or measure of the contents, unless the container holds more than 1,000 tablets or capsules in which case an exact count of the contents shall be made; or

(iii) The number and size (e.g., five 10-gallon liners, etc.) of sealed inner liners on hand, or

(iv) the number of sealed mail-back packages on hand.

(4) Each person registered or authorized to import or export controlled substances shall include in the inventory the same information required of manufacturers pursuant to paragraphs (e)(1) (iii) and (iv) of this section. Each such person who is also registered as a manufacturer or as a distributor shall include in his/her inventory as an importer or exporter only those stocks of controlled substances that are actually separated from his stocks as a manufacturer or as a distributor (e.g., in transit or in storage for shipment).

(5) Each person registered or authorized to conduct chemical analysis with controlled substances shall include in his inventory the same information required of manufacturers pursuant to paragraphs (e)(1) (iii) and (iv) of this section as to substances which have been manufactured, imported, or received by such person. If less than 1 kilogram of any controlled substance (other than a hallucinogenic controlled substance listed in Schedule I), or less than 20 grams of a hallucinogenic substance listed in Schedule I (other than lysergic acid diethylamide), or less than 0.5 gram of lysergic acid diethylamide, is on hand at the time of inventory, that substance need not be included in the inventory. Laboratories of the Administration may possess up to 150 grams of any hallucinogenic substance in Schedule I without regard to a need for an inventory of those substances. No inventory is required of known or suspected controlled substances received as evidentiary materials for analysis.

(6) Each person registered or authorized to dispense or conduct research with controlled substances shall include in the inventory the same information required of manufacturers pursuant to paragraphs (e)(1)(iii) and (iv) of this section. In determining the number of units of each finished form of a controlled substance in a commercial container that has been opened, the dispenser or researcher shall do as follows:

(i) If the substance is listed in Schedules I or II, make an exact count or measure of the contents; or

(ii) If the substance is listed in Schedule III, IV, or V, make an estimated count or measure of the contents, unless the container holds more than 1,000 tablets or capsules in which case he/she must make an exact count of the contents.

(7) Each registrant authorized to collect controlled substances from ultimate users shall include in the inventory the following information:

(i) For registrants authorized to collect through a mail-back program, the record shall include the following information about each unused mail-back package and each returned mail-back package on hand awaiting destruction:

(A) The date of the inventory;

(B) The number of mail-back packages; and

(ii) For registrants authorized to collect through a collection receptacle, the record shall include the following information about each unused inner liner on hand and each sealed inner liner on hand awaiting destruction:

(A) The date of the inventory;

(B) The number and size of inner liners (e.g., five 10-gallon liners, etc.);

Each person registered or authorized (by §§ 1301.13(e), 1307.11, 1307.13, or part 1317 of this chapter) to manufacture, distribute, dispense, import, export, reverse distribute, destroy, conduct research with controlled substances, or collect controlled substances from ultimate users, shall maintain records with the information listed in paragraphs (a) through (f) of this section.