§191.14. Identification of merchandise or articles by accounting method. — Inbound Citations

(B) If all goods in a particular inventory are non-originating goods, identification of entries for designation for same condition drawback shall be on the basis of one of the accounting methods in § 190.14 or § 191.14 of this chapter, as appropriate.

(h) Direct identification drawback. Direct identification drawback means drawback authorized either under § 313(a) of the Act, as amended (19 U.S.C. 1313(a)), on imported merchandise used to manufacture or produce an article which is either exported or destroyed, or under § 313(j)(1) of the Act, as amended (19 U.S.C. 1313(j)(1)), on imported merchandise exported, or destroyed under Customs supervision, without having been used in the United States (see also §§ 313(c), (e), (f), (g), (h), and (q)). Merchandise or articles may be identified for purposes of direct identification drawback by use of the accounting methods provided for in § 191.14 of this subpart.

Section 313(a) of the Act, as amended (19 U.S.C. 1313(a)), provides for drawback upon the exportation, or destruction under Customs supervision, of articles which are not used in the United States prior to their exportation or destruction, and which are manufactured or produced in the United States wholly or in part with the use of particular imported, duty-paid merchandise and/or drawback product(s). Where two or more products result, drawback shall be distributed among the products in accordance with their relative value (see § 191.2(u)) at the time of separation. Merchandise may be identified for drawback purposes under 19 U.S.C. 1313(a) in the manner provided for and prescribed in § 191.14 of this part.

(vi) That the finished articles on which drawback is claimed were exported or destroyed within 5 years after the importation of the duty-paid merchandise, without having been used in the United States prior to such exportation or destruction. (If the completed articles were commingled after manufacture, their identity may be maintained in the manner prescribed in § 191.14 of this part.)