§10.243. Articles eligible for preferential treatment. — Inbound Citations

Title II of Pub. L. 102-182 (105 Stat. 1233), entitled the Andean Trade Preference Act (ATPA) and codified at 19 U.S.C. 3201 through 3206, authorizes the President to proclaim duty-free treatment for all eligible articles from any beneficiary country and to designate countries as beneficiary countries. The provisions of §§ 10.202 through 10.207 set forth the legal requirements and procedures that apply for purposes of obtaining that duty-free treatment for certain articles from a beneficiary country which are identified for purposes of that treatment in General Note 11, Harmonized Tariff Schedule of the United States (HTSUS), and in the “Special” rate of duty column of the HTSUS. Provisions regarding preferential treatment of apparel and other textile articles under the ATPA are contained in §§ 10.241 through 10.248, and provisions regarding preferential treatment of tuna and certain other non-textile articles under the ATPA are contained in §§ 10.251 through 10.257.

(1) Textiles and apparel articles which were not eligible articles for purposes of the ATPA on January 1, 1994, as the ATPA was in effect on that date, except as otherwise provided in §§ 10.241 through 10.248;

Title XXXI of Public Law 107-210 (116 Stat. 933), entitled the Andean Trade Promotion and Drug Eradication Act (ATPDEA), amended sections 202, 203, 204, and 208 of the Andean Trade Preference Act (the ATPA, 19 U.S.C. 3201-3206) to authorize the President to extend additional trade benefits to countries that are designated as beneficiary countries under the ATPA. Section 204(b)(3) of the ATPA (19 U.S.C. 3203(b)(3)) provides for the preferential treatment of certain apparel and other textile articles from those ATPA beneficiary countries which the President designates as ATPDEA beneficiary countries. The provisions of §§ 10.241 through 10.248 of this part set forth the legal requirements and procedures that apply for purposes of obtaining preferential treatment pursuant to ATPA section 204(b)(3) and Subchapter XXI, Chapter 98, HTSUS.

When used in §§ 10.241 through 10.248, the following terms have the meanings indicated:

(a) In connection with a claim for preferential treatment for an apparel or other textile article described in § 10.243, the importer must make a written declaration that the article qualifies for that treatment. The inclusion on the entry summary, or equivalent documentation, of the subheading within Chapter 98 of the HTSUS under which the article is classified will constitute the written declaration. Except in any of the circumstances described in § 10.246(d)(1), the declaration required under this paragraph must be based on a Certificate of Origin that has been completed and properly executed in accordance with § 10.244, that covers the article being imported, and that is in the possession of the importer.

When used in §§ 10.241 through 10.248, the following terms have the meanings indicated:

(1) Must have records that explain how the importer came to the conclusion that the apparel or other textile article qualifies for preferential treatment. Those records must include documents that support a claim that the article in question qualifies for preferential treatment because it is specifically described in one of the provisions under § 10.243(a). If the importer is claiming that the article incorporates fabric or yarn that was wholly formed in the United States or in an ATPDEA beneficiary country, the importer must have records that identify the producer of the fabric or yarn. A properly completed Certificate of Origin in the form set forth in § 10.244(b) is a record that would serve these purposes;

(4) Brassieres classifiable under subheading 6212.10 of the HTSUS, if both cut and sewn or otherwise assembled in the United States, or in one or more ATPDEA beneficiary countries, or in both, other than articles entered as articles described in paragraphs (a)(1) through (a)(3) and (a)(7) of this section, and provided that any applicable additional requirements set forth in § 10.248 are met;

(2) Apparel articles sewn or otherwise assembled in one or more ATPDEA beneficiary countries, or in the United States, or in both, exclusively from a combination of fabrics, fabric components, knit-to-shape components or yarns described in two or more of paragraphs (a)(1)(i) through (a)(1)(iv) of this section;

(2) Apparel articles sewn or otherwise assembled in one or more ATPDEA beneficiary countries, or in the United States, or in both, exclusively from a combination of fabrics, fabric components, knit-to-shape components or yarns described in two or more of paragraphs (a)(1)(i) through (a)(1)(iv) of this section;

(2) Apparel articles sewn or otherwise assembled in one or more ATPDEA beneficiary countries, or in the United States, or in both, exclusively from a combination of fabrics, fabric components, knit-to-shape components or yarns described in two or more of paragraphs (a)(1)(i) through (a)(1)(iv) of this section;

(2) Apparel articles sewn or otherwise assembled in one or more ATPDEA beneficiary countries, or in the United States, or in both, exclusively from a combination of fabrics, fabric components, knit-to-shape components or yarns described in two or more of paragraphs (a)(1)(i) through (a)(1)(iv) of this section;

(4) Brassieres classifiable under subheading 6212.10 of the HTSUS, if both cut and sewn or otherwise assembled in the United States, or in one or more ATPDEA beneficiary countries, or in both, other than articles entered as articles described in paragraphs (a)(1) through (a)(3) and (a)(7) of this section, and provided that any applicable additional requirements set forth in § 10.248 are met;

(4) Brassieres classifiable under subheading 6212.10 of the HTSUS, if both cut and sewn or otherwise assembled in the United States, or in one or more ATPDEA beneficiary countries, or in both, other than articles entered as articles described in paragraphs (a)(1) through (a)(3) and (a)(7) of this section, and provided that any applicable additional requirements set forth in § 10.248 are met;

(1) During the year that begins on October 1, 2003, and during any subsequent year, articles of a producer or an entity controlling production that conform to the production standards set forth in § 10.243(a)(4) will be eligible for preferential treatment only if:

(i) The aggregate cost of fabrics (exclusive of all findings and trimmings) formed in the United States that were used in the production of all of those articles of that producer or that entity controlling production that are entered as articles described in § 10.243(a)(4) during the immediately preceding year was at least 75 percent of the aggregate declared customs value of the fabric (exclusive of all findings and trimmings) contained in all of those articles of that producer or that entity controlling production that are entered as articles described in § 10.243(a)(4) during that year; or

(ii) In a case in which the 75 percent requirement set forth in paragraph (b)(1)(i) of this section was not met during a year and therefore those articles of that producer or that entity controlling production were not eligible for preferential treatment during the following year, the aggregate cost of fabrics (exclusive of all findings and trimmings) formed in the United States that were used in the production of all of those articles of that producer or that entity controlling production that conform to the production standards set forth in § 10.243(a)(4) and that were entered during the immediately preceding year was at least 85 percent of the aggregate declared customs value of the fabric (exclusive of all findings and trimmings) contained in all of those articles of that producer or that entity controlling production that conform to the production standards set forth in § 10.243(a)(4) and that were entered during that year; and

(iii) In conjunction with the filing of the claim for preferential treatment under § 10.245, the importer records on the entry summary or warehouse withdrawal for consumption (CBP Form 7501, column 34), or its electronic equivalent, the distinct and unique identifier assigned by CBP to the applicable documentation prescribed under paragraph (c) of this section.

When used in §§ 10.241 through 10.248, the following terms have the meanings indicated:

(3) Must have shipping papers that show how the article moved from the ATPDEA beneficiary country to the United States. If the imported article was shipped through a country other than an ATPDEA beneficiary country and the invoices and other documents from the ATPDEA beneficiary country do not show the United States as the final destination, the importer also must have documentation that demonstrates that the conditions set forth in § 10.243(d)(3)(i) through (iii) were met; and

(3) Must have shipping papers that show how the article moved from the ATPDEA beneficiary country to the United States. If the imported article was shipped through a country other than an ATPDEA beneficiary country and the invoices and other documents from the ATPDEA beneficiary country do not show the United States as the final destination, the importer also must have documentation that demonstrates that the conditions set forth in § 10.243(d)(3)(i) through (iii) were met; and

(3) Must have shipping papers that show how the article moved from the ATPDEA beneficiary country to the United States. If the imported article was shipped through a country other than an ATPDEA beneficiary country and the invoices and other documents from the ATPDEA beneficiary country do not show the United States as the final destination, the importer also must have documentation that demonstrates that the conditions set forth in § 10.243(d)(3)(i) through (iii) were met; and

(3) Must have shipping papers that show how the article moved from the ATPDEA beneficiary country to the United States. If the imported article was shipped through a country other than an ATPDEA beneficiary country and the invoices and other documents from the ATPDEA beneficiary country do not show the United States as the final destination, the importer also must have documentation that demonstrates that the conditions set forth in § 10.243(d)(3)(i) through (iii) were met; and