§89.520. Production requirements for remote identification broadcast modules. — Inbound Citations

No person may produce a standard remote identification unmanned aircraft under § 89.510 or § 89.515 or a remote identification broadcast module under § 89.520, unless the producer assigns to the unmanned aircraft or remote identification broadcast module a serial number that complies with ANSI/CTA-2063-A. ANSI/CTA-2063-A, Small Unmanned Aerial Systems Serial Numbers (September 2019) is incorporated by reference into this section with the approval of the Director of the Office of the Federal Register under 5 U.S.C. 552(a) and 1 CFR part 51. All approved material is available for inspection at the FAA's Office of Rulemaking (ARM-1), 800 Independence Avenue SW, Washington, DC 20590 (telephone 202-267-9677) and is available from Consumer Technology Association (CTA), 1919 South Eads Street, Arlington, VA 22202, [email protected], 703-907-7600 or at https://www.cta.tech. It is also available for inspection at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, email [email protected], or go to www.archives.gov/federal-register/cfr/ibr-locations.html.

(b) No person may produce a remote identification broadcast module under § 89.520 unless it displays a label indicating that the equipment meets the requirements of this part. The label must be in English and be legible, prominent, and permanently affixed to the broadcast module.

(a) A person responsible for the production of a standard remote identification unmanned aircraft under § 89.515 or a remote identification broadcast module under § 89.520 must submit a declaration of compliance for acceptance by the FAA.

(ii) Complies with the requirements of § 89.520(b).